Skip to content

add 1wire supports and fixup red_led node name error - #22

Merged
numbqq merged 2 commits into
khadas:khadas-vims-4.9.yfrom
yan-wyb:khadas-vims-4.9.y
Jul 17, 2020
Merged

numbqq merged 2 commits into
khadas:khadas-vims-4.9.yfrom
yan-wyb:khadas-vims-4.9.y

Conversation

@yan-wyb

@yan-wyb yan-wyb commented Jul 17, 2020

Copy link
Copy Markdown

No description provided.

yan-wyb added 2 commits July 17, 2020 17:08
Signed-off-by: yan <yan-wyb@foxmail.com>
Signed-off-by: yan <yan-wyb@foxmail.com>
@numbqq
numbqq merged commit 4c96315 into khadas:khadas-vims-4.9.y Jul 17, 2020
numbqq pushed a commit that referenced this pull request Nov 7, 2020
[ Upstream commit e24c644 ]

I compiled with AddressSanitizer and I had these memory leaks while I
was using the tep_parse_format function:

    Direct leak of 28 byte(s) in 4 object(s) allocated from:
        #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe)
        #1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985
        #2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140
        #3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206
        #4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291
        #5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299
        #6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849
        #7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161
        #8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207
        #9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786
        #10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285
        #11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369
        #12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335
        #13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389
        #14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431
        #15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251
        #16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284
        #17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593
        #18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727
        #19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048
        #20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127
        #21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152
        #22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252
        #23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347
        #24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461
        #25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673
        #26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2)

The token variable in the process_dynamic_array_len function is
allocated in the read_expect_type function, but is not freed before
calling the read_token function.

Free the token variable before calling read_token in order to plug the
leak.

Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
numbqq pushed a commit that referenced this pull request Nov 7, 2020
[ Upstream commit 96298f6 ]

According to Core Spec Version 5.2 | Vol 3, Part A 6.1.5,
the incoming L2CAP_ConfigReq should be handled during
OPEN state.

The section below shows the btmon trace when running
L2CAP/COS/CFD/BV-12-C before and after this change.

=== Before ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12                #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16                #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12                #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5      #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5      #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16                #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18                #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5      #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14                #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20                #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                ......
< ACL Data TX: Handle 256 flags 0x00 dlen 14                #32
      L2CAP: Command Reject (0x01) ident 3 len 6
        Reason: Invalid CID in request (0x0002)
        Destination CID: 64
        Source CID: 65
> HCI Event: Number of Completed Packets (0x13) plen 5      #33
        Num handles: 1
        Handle: 256
        Count: 1
...
=== After ===
...
> ACL Data RX: Handle 256 flags 0x02 dlen 12               #22
      L2CAP: Connection Request (0x02) ident 2 len 4
        PSM: 1 (0x0001)
        Source CID: 65
< ACL Data TX: Handle 256 flags 0x00 dlen 16               #23
      L2CAP: Connection Response (0x03) ident 2 len 8
        Destination CID: 64
        Source CID: 65
        Result: Connection successful (0x0000)
        Status: No further information available (0x0000)
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #24
      L2CAP: Configure Request (0x04) ident 2 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #25
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #26
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 16               #27
      L2CAP: Configure Request (0x04) ident 3 len 8
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00                                            ..
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #28
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
> HCI Event: Number of Completed Packets (0x13) plen 5     #29
        Num handles: 1
        Handle: 256
        Count: 1
> ACL Data RX: Handle 256 flags 0x02 dlen 14               #30
      L2CAP: Configure Response (0x05) ident 2 len 6
        Source CID: 64
        Flags: 0x0000
        Result: Success (0x0000)
> ACL Data RX: Handle 256 flags 0x02 dlen 20               #31
      L2CAP: Configure Request (0x04) ident 3 len 12
        Destination CID: 64
        Flags: 0x0000
        Option: Unknown (0x10) [hint]
        01 00 91 02 11 11                                .....
< ACL Data TX: Handle 256 flags 0x00 dlen 18               #32
      L2CAP: Configure Response (0x05) ident 3 len 10
        Source CID: 65
        Flags: 0x0000
        Result: Success (0x0000)
        Option: Maximum Transmission Unit (0x01) [mandatory]
          MTU: 672
< ACL Data TX: Handle 256 flags 0x00 dlen 12               #33
      L2CAP: Configure Request (0x04) ident 3 len 4
        Destination CID: 65
        Flags: 0x0000
> HCI Event: Number of Completed Packets (0x13) plen 5     #34
        Num handles: 1
        Handle: 256
        Count: 1
> HCI Event: Number of Completed Packets (0x13) plen 5     #35
        Num handles: 1
        Handle: 256
        Count: 1
...

Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
numbqq pushed a commit that referenced this pull request May 17, 2024
Commit

  d9e3d2c ("efi/x86: Don't map the entire kernel text RW for mixed mode")

updated the code that creates the 1:1 memory mapping to use read-only
attributes for the 1:1 alias of the kernel's text and rodata sections, to
protect it from inadvertent modification. However, it failed to take into
account that the unused gap between text and rodata is given to the page
allocator for general use.

If the vmap'ed stack happens to be allocated from this region, any by-ref
output arguments passed to EFI runtime services that are allocated on the
stack (such as the 'datasize' argument taken by GetVariable() when invoked
from efivar_entry_size()) will be referenced via a read-only mapping,
resulting in a page fault if the EFI code tries to write to it:

  BUG: unable to handle page fault for address: 00000000386aae88
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0003) - permissions violation
  PGD fd61063 P4D fd61063 PUD fd62063 PMD 386000e1
  Oops: 0003 [#1] SMP PTI
  CPU: 2 PID: 255 Comm: systemd-sysv-ge Not tainted 5.6.0-rc4-default+ #22
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0008:0x3eaeed95
  Code: ...  <89> 03 be 05 00 00 80 a1 74 63 b1 3e 83 c0 48 e8 44 d2 ff ff eb 05
  RSP: 0018:000000000fd73fa0 EFLAGS: 00010002
  RAX: 0000000000000001 RBX: 00000000386aae88 RCX: 000000003e9f1120
  RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000001
  RBP: 000000000fd73fd8 R08: 00000000386aae88 R09: 0000000000000000
  R10: 0000000000000002 R11: 0000000000000000 R12: 0000000000000000
  R13: ffffc0f040220000 R14: 0000000000000000 R15: 0000000000000000
  FS:  00007f21160ac940(0000) GS:ffff9cf23d500000(0000) knlGS:0000000000000000
  CS:  0008 DS: 0018 ES: 0018 CR0: 0000000080050033
  CR2: 00000000386aae88 CR3: 000000000fd6c004 CR4: 00000000003606e0
  DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
  DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
  Call Trace:
  Modules linked in:
  CR2: 00000000386aae88
  ---[ end trace a8bfbd202e712834 ]---

Let's fix this by remapping text and rodata individually, and leave the
gaps mapped read-write.

Fixes: d9e3d2c ("efi/x86: Don't map the entire kernel text RW for mixed mode")
Reported-by: Jiri Slaby <jslaby@suse.cz>
Tested-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20200409130434.6736-10-ardb@kernel.org
123Xiong-Zhang pushed a commit that referenced this pull request Nov 7, 2024
When bringing down the netdevice or system shutdown, a panic can be
triggered while accessing the sysfs path because the device is already
removed.

    [  755.549084] mlx5_core 0000:12:00.1: Shutdown was called
    [  756.404455] mlx5_core 0000:12:00.0: Shutdown was called
    ...
    [  757.937260] BUG: unable to handle kernel NULL pointer dereference at           (null)
    [  758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280

    crash> bt
    ...
    PID: 12649  TASK: ffff8924108f2100  CPU: 1   COMMAND: "amsd"
    ...
     #9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778
        [exception RIP: dma_pool_alloc+0x1ab]
        RIP: ffffffff8ee11acb  RSP: ffff89240e1a3968  RFLAGS: 00010046
        RAX: 0000000000000246  RBX: ffff89243d874100  RCX: 0000000000001000
        RDX: 0000000000000000  RSI: 0000000000000246  RDI: ffff89243d874090
        RBP: ffff89240e1a39c0   R8: 000000000001f080   R9: ffff8905ffc03c00
        R10: ffffffffc04680d4  R11: ffffffff8edde9fd  R12: 00000000000080d0
        R13: ffff89243d874090  R14: ffff89243d874080  R15: 0000000000000000
        ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    #10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core]
    #11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core]
    #12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core]
    #13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core]
    #14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core]
    #15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core]
    #16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core]
    #17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46
    #18 [ffff89240e1a3d48] speed_show at ffffffff8f277208
    #19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3
    #20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf
    #21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596
    #22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10
    #23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5
    #24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff
    #25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f
    #26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92

    crash> net_device.state ffff89443b0c0000
      state = 0x5  (__LINK_STATE_START| __LINK_STATE_NOCARRIER)

To prevent this scenario, we also make sure that the netdevice is present.

Signed-off-by: suresh kumar <suresh2514@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NegXuan pushed a commit to NegXuan/linux that referenced this pull request Aug 25, 2025
…uddy pages

commit 8cf360b upstream.

When I did memory failure tests recently, below panic occurs:

page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00
flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff)
raw: 06fffe0000000000 dead000000000100 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000009 00000000ffffffff 0000000000000000
page dumped because: VM_BUG_ON_PAGE(!PageBuddy(page))
------------[ cut here ]------------
kernel BUG at include/linux/page-flags.h:1009!
invalid opcode: 0000 [khadas#1] PREEMPT SMP NOPTI
RIP: 0010:__del_page_from_free_list+0x151/0x180
RSP: 0018:ffffa49c90437998 EFLAGS: 00000046
RAX: 0000000000000035 RBX: 0000000000000009 RCX: ffff8dd8dfd1c9c8
RDX: 0000000000000000 RSI: 0000000000000027 RDI: ffff8dd8dfd1c9c0
RBP: ffffd901233b8000 R08: ffffffffab5511f8 R09: 0000000000008c69
R10: 0000000000003c15 R11: ffffffffab5511f8 R12: ffff8dd8fffc0c80
R13: 0000000000000001 R14: ffff8dd8fffc0c80 R15: 0000000000000009
FS:  00007ff916304740(0000) GS:ffff8dd8dfd00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055eae50124c8 CR3: 00000008479e0000 CR4: 00000000000006f0
Call Trace:
 <TASK>
 __rmqueue_pcplist+0x23b/0x520
 get_page_from_freelist+0x26b/0xe40
 __alloc_pages_noprof+0x113/0x1120
 __folio_alloc_noprof+0x11/0xb0
 alloc_buddy_hugetlb_folio.isra.0+0x5a/0x130
 __alloc_fresh_hugetlb_folio+0xe7/0x140
 alloc_pool_huge_folio+0x68/0x100
 set_max_huge_pages+0x13d/0x340
 hugetlb_sysctl_handler_common+0xe8/0x110
 proc_sys_call_handler+0x194/0x280
 vfs_write+0x387/0x550
 ksys_write+0x64/0xe0
 do_syscall_64+0xc2/0x1d0
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff916114887
RSP: 002b:00007ffec8a2fd78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000055eae500e350 RCX: 00007ff916114887
RDX: 0000000000000004 RSI: 000055eae500e390 RDI: 0000000000000003
RBP: 000055eae50104c0 R08: 0000000000000000 R09: 000055eae50104c0
R10: 0000000000000077 R11: 0000000000000246 R12: 0000000000000004
R13: 0000000000000004 R14: 00007ff916216b80 R15: 00007ff916216a00
 </TASK>
Modules linked in: mce_inject hwpoison_inject
---[ end trace 0000000000000000 ]---

And before the panic, there had an warning about bad page state:

BUG: Bad page state in process page-types  pfn:8cee00
page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8cee00
flags: 0x6fffe0000000000(node=1|zone=2|lastcpupid=0x7fff)
page_type: 0xffffff7f(buddy)
raw: 06fffe0000000000 ffffd901241c0008 ffffd901240f8008 0000000000000000
raw: 0000000000000000 0000000000000009 00000000ffffff7f 0000000000000000
page dumped because: nonzero mapcount
Modules linked in: mce_inject hwpoison_inject
CPU: 8 PID: 154211 Comm: page-types Not tainted 6.9.0-rc4-00499-g5544ec3178e2-dirty khadas#22
Call Trace:
 <TASK>
 dump_stack_lvl+0x83/0xa0
 bad_page+0x63/0xf0
 free_unref_page+0x36e/0x5c0
 unpoison_memory+0x50b/0x630
 simple_attr_write_xsigned.constprop.0.isra.0+0xb3/0x110
 debugfs_attr_write+0x42/0x60
 full_proxy_write+0x5b/0x80
 vfs_write+0xcd/0x550
 ksys_write+0x64/0xe0
 do_syscall_64+0xc2/0x1d0
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f189a514887
RSP: 002b:00007ffdcd899718 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f189a514887
RDX: 0000000000000009 RSI: 00007ffdcd899730 RDI: 0000000000000003
RBP: 00007ffdcd8997a0 R08: 0000000000000000 R09: 00007ffdcd8994b2
R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffdcda199a8
R13: 0000000000404af1 R14: 000000000040ad78 R15: 00007f189a7a5040
 </TASK>

The root cause should be the below race:

 memory_failure
  try_memory_failure_hugetlb
   me_huge_page
    __page_handle_poison
     dissolve_free_hugetlb_folio
     drain_all_pages -- Buddy page can be isolated e.g. for compaction.
     take_page_off_buddy -- Failed as page is not in the buddy list.
	     -- Page can be putback into buddy after compaction.
    page_ref_inc -- Leads to buddy page with refcnt = 1.

Then unpoison_memory() can unpoison the page and send the buddy page back
into buddy list again leading to the above bad page state warning.  And
bad_page() will call page_mapcount_reset() to remove PageBuddy from buddy
page leading to later VM_BUG_ON_PAGE(!PageBuddy(page)) when trying to
allocate this page.

Fix this issue by only treating __page_handle_poison() as successful when
it returns 1.

Link: https://lkml.kernel.org/r/20240523071217.1696196-1-linmiaohe@huawei.com
Fixes: ceaf8fb ("mm, hwpoison: skip raw hwpoison page in freeing 1GB hugepage")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Cc: Naoya Horiguchi <nao.horiguchi@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
numbqq pushed a commit to numbqq/linux that referenced this pull request Mar 17, 2026
Syzkaller managed to find a combination of actions that was generating
this warning:

  msk->pm.local_addr_used == 0
  WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961
  WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961
  WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961
  Modules linked in:
  CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b khadas#22 PREEMPT(full)
  Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014
  RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline]
  RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline]
  RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210
  Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a
  RSP: 0018:ffffc90001663880 EFLAGS: 00010293
  RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
  RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff
  R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640
  R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650
  FS:  00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0
  Call Trace:
   <TASK>
   genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
   genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
   genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
   netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
   genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
   netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
   netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
   netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894
   sock_sendmsg_nosec net/socket.c:727 [inline]
   __sock_sendmsg+0xc9/0xf0 net/socket.c:742
   ____sys_sendmsg+0x272/0x3b0 net/socket.c:2592
   ___sys_sendmsg+0x2de/0x320 net/socket.c:2646
   __sys_sendmsg net/socket.c:2678 [inline]
   __do_sys_sendmsg net/socket.c:2683 [inline]
   __se_sys_sendmsg net/socket.c:2681 [inline]
   __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681
   do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
   do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94
   entry_SYSCALL_64_after_hwframe+0x77/0x7f
  RIP: 0033:0x7f66346f826d
  Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
  RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d
  RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007
  RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8
  R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770
   </TASK>

The actions that caused that seem to be:

 - Set the MPTCP subflows limit to 0
 - Create an MPTCP endpoint with both the 'signal' and 'subflow' flags
 - Create a new MPTCP connection from a different address: an ADD_ADDR
   linked to the MPTCP endpoint will be sent ('signal' flag), but no
   subflows is initiated ('subflow' flag)
 - Remove the MPTCP endpoint

In this case, msk->pm.local_addr_used has been kept to 0 -- because no
subflows have been created -- but the corresponding bit in
msk->pm.id_avail_bitmap has been cleared when the ADD_ADDR has been
sent. This later causes a splat when removing the MPTCP endpoint because
msk->pm.local_addr_used has been kept to 0.

Now, if an endpoint has both the signal and subflow flags, but it is not
possible to create subflows because of the limits or the c-flag case,
then the local endpoint counter is still incremented: the endpoint is
used at the end. This avoids issues later when removing the endpoint and
calling __mark_subflow_endp_available(), which expects
msk->pm.local_addr_used to have been previously incremented if the
endpoint was marked as used according to msk->pm.id_avail_bitmap.

Note that signal_and_subflow variable is reset to false when the limits
and the c-flag case allows subflows creation. Also, local_addr_used is
only incremented for non ID0 subflows.

Fixes: 85df533 ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set")
Cc: stable@vger.kernel.org
Closes: multipath-tcp/mptcp_net-next#613
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-4-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
HighwayStar pushed a commit to Lineage-Rockchip/android_kernel_rockchip_kernel-6.1 that referenced this pull request Oct 12, 2026
…stamping

[ Upstream commit 030ce91 ]

The stmmac platform drivers that do not open-code the clk_ptp_rate value
after having retrieved the default one from the device-tree can end up
with 0 in clk_ptp_rate (as clk_get_rate can return 0). It will
eventually propagate up to PTP initialization when bringing up the
interface, leading to a divide by 0:

 Division by zero in kernel.
 CPU: 1 UID: 0 PID: 1 Comm: swapper/0 Not tainted 6.12.30-00001-g48313bd5768a khadas#22
 Hardware name: STM32 (Device Tree Support)
 Call trace:
  unwind_backtrace from show_stack+0x18/0x1c
  show_stack from dump_stack_lvl+0x6c/0x8c
  dump_stack_lvl from Ldiv0_64+0x8/0x18
  Ldiv0_64 from stmmac_init_tstamp_counter+0x190/0x1a4
  stmmac_init_tstamp_counter from stmmac_hw_setup+0xc1c/0x111c
  stmmac_hw_setup from __stmmac_open+0x18c/0x434
  __stmmac_open from stmmac_open+0x3c/0xbc
  stmmac_open from __dev_open+0xf4/0x1ac
  __dev_open from __dev_change_flags+0x1cc/0x224
  __dev_change_flags from dev_change_flags+0x24/0x60
  dev_change_flags from ip_auto_config+0x2e8/0x11a0
  ip_auto_config from do_one_initcall+0x84/0x33c
  do_one_initcall from kernel_init_freeable+0x1b8/0x214
  kernel_init_freeable from kernel_init+0x24/0x140
  kernel_init from ret_from_fork+0x14/0x28
 Exception stack(0xe0815fb0 to 0xe0815ff8)

Prevent this division by 0 by adding an explicit check and error log
about the actual issue. While at it, remove the same check from
stmmac_ptp_register, which then becomes duplicate

Fixes: 19d857c ("stmmac: Fix calculations for ptp counters when clock input = 50Mhz.")
Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Reviewed-by: Yanteng Si <si.yanteng@linux.dev>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250529-stmmac_tstamp_div-v4-1-d73340a794d5@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
HighwayStar pushed a commit to Lineage-Rockchip/android_kernel_rockchip_kernel-6.1 that referenced this pull request Oct 12, 2026
commit f1897f2 upstream.

syzkaller reported such a BUG_ON():

 ------------[ cut here ]------------
 kernel BUG at mm/khugepaged.c:1835!
 Internal error: Oops - BUG: 00000000f2000800 [khadas#1] SMP
 ...
 CPU: 6 UID: 0 PID: 8009 Comm: syz.15.106 Kdump: loaded Tainted: G        W          6.13.0-rc6 khadas#22
 Tainted: [W]=WARN
 Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
 pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
 pc : collapse_file+0xa44/0x1400
 lr : collapse_file+0x88/0x1400
 sp : ffff80008afe3a60
 ...
 Call trace:
  collapse_file+0xa44/0x1400 (P)
  hpage_collapse_scan_file+0x278/0x400
  madvise_collapse+0x1bc/0x678
  madvise_vma_behavior+0x32c/0x448
  madvise_walk_vmas.constprop.0+0xbc/0x140
  do_madvise.part.0+0xdc/0x2c8
  __arm64_sys_madvise+0x68/0x88
  invoke_syscall+0x50/0x120
  el0_svc_common.constprop.0+0xc8/0xf0
  do_el0_svc+0x24/0x38
  el0_svc+0x34/0x128
  el0t_64_sync_handler+0xc8/0xd0
  el0t_64_sync+0x190/0x198

This indicates that the pgoff is unaligned.  After analysis, I confirm the
vma is mapped to /dev/zero.  Such a vma certainly has vm_file, but it is
set to anonymous by mmap_zero().  So even if it's mmapped by 2m-unaligned,
it can pass the check in thp_vma_allowable_order() as it is an
anonymous-mmap, but then be collapsed as a file-mmap.

It seems the problem has existed for a long time, but actually, since we
have khugepaged_max_ptes_none check before, we will skip collapse it as it
is /dev/zero and so has no present page.  But commit d8ea7cc limit
the check for only khugepaged, so the BUG_ON() can be triggered by
madvise_collapse().

Add vma_is_anonymous() check to make such vma be processed by
hpage_collapse_scan_pmd().

Link: https://lkml.kernel.org/r/20250111034511.2223353-1-liushixin2@huawei.com
Fixes: d8ea7cc ("mm/khugepaged: add flag to predicate khugepaged-only behavior")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Reviewed-by: Yang Shi <yang@os.amperecomputing.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Mattew Wilcox <willy@infradead.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nanyong Sun <sunnanyong@huawei.com>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
[acsjakub: backport, clean apply]
Signed-off-by: Jakub Acs <acsjakub@amazon.de>
Cc: linux-mm@kvack.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HighwayStar pushed a commit to Lineage-Rockchip/android_kernel_rockchip_kernel-6.1 that referenced this pull request Oct 12, 2026
[ Upstream commit 3ec6002 ]

If we have 2 instances of sbs-charger in the DTS, the driver probe for the second instance will fail:

[    8.012874] sbs-battery 18-000b: sbs-battery: battery gas gauge device registered
[    8.039094] sbs-charger 18-0009: ltc4100: smart charger device registered
[    8.112911] sbs-battery 20-000b: sbs-battery: battery gas gauge device registered
[    8.134533] sysfs: cannot create duplicate filename '/class/power_supply/sbs-charger'
[    8.143871] CPU: 3 PID: 295 Comm: systemd-udevd Tainted: G           O      5.10.147 khadas#22
[    8.151974] Hardware name: ALE AMB (DT)
[    8.155828] Call trace:
[    8.158292]  dump_backtrace+0x0/0x1d4
[    8.161960]  show_stack+0x18/0x6c
[    8.165280]  dump_stack+0xcc/0x128
[    8.168687]  sysfs_warn_dup+0x60/0x7c
[    8.172353]  sysfs_do_create_link_sd+0xf0/0x100
[    8.176886]  sysfs_create_link+0x20/0x40
[    8.180816]  device_add+0x270/0x7a4
[    8.184311]  __power_supply_register+0x304/0x560
[    8.188930]  devm_power_supply_register+0x54/0xa0
[    8.193644]  sbs_probe+0xc0/0x214 [sbs_charger]
[    8.198183]  i2c_device_probe+0x2dc/0x2f4
[    8.202196]  really_probe+0xf0/0x510
[    8.205774]  driver_probe_device+0xfc/0x160
[    8.209960]  device_driver_attach+0xc0/0xcc
[    8.214146]  __driver_attach+0xc0/0x170
[    8.218002]  bus_for_each_dev+0x74/0xd4
[    8.221862]  driver_attach+0x24/0x30
[    8.225444]  bus_add_driver+0x148/0x250
[    8.229283]  driver_register+0x78/0x130
[    8.233140]  i2c_register_driver+0x4c/0xe0
[    8.237250]  sbs_driver_init+0x20/0x1000 [sbs_charger]
[    8.242424]  do_one_initcall+0x50/0x1b0
[    8.242434]  do_init_module+0x44/0x230
[    8.242438]  load_module+0x2200/0x27c0
[    8.242442]  __do_sys_finit_module+0xa8/0x11c
[    8.242447]  __arm64_sys_finit_module+0x20/0x30
[    8.242457]  el0_svc_common.constprop.0+0x64/0x154
[    8.242464]  do_el0_svc+0x24/0x8c
[    8.242474]  el0_svc+0x10/0x20
[    8.242481]  el0_sync_handler+0x108/0x114
[    8.242485]  el0_sync+0x180/0x1c0
[    8.243847] sbs-charger 20-0009: Failed to register power supply
[    8.287934] sbs-charger: probe of 20-0009 failed with error -17

This is mainly because the "name" field of power_supply_desc is a constant.
This patch fixes the issue by reusing the same approach as sbs-battery.
With this patch, the result is:
[    7.819532] sbs-charger 18-0009: ltc4100: smart charger device registered
[    7.825305] sbs-battery 18-000b: sbs-battery: battery gas gauge device registered
[    7.887423] sbs-battery 20-000b: sbs-battery: battery gas gauge device registered
[    7.893501] sbs-charger 20-0009: ltc4100: smart charger device registered

Signed-off-by: Fabien Proriol <fabien.proriol@viavisolutions.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
HighwayStar pushed a commit to Lineage-Rockchip/android_kernel_rockchip_kernel-6.1 that referenced this pull request Oct 12, 2026
commit 4aa1714 upstream.

Typically copynotify stateid is freed either when parent's stateid
is being close/freed or in nfsd4_laundromat if the stateid hasn't
been used in a lease period.

However, in case when the server got an OPEN (which created
a parent stateid), followed by a COPY_NOTIFY using that stateid,
followed by a client reboot. New client instance while doing
CREATE_SESSION would force expire previous state of this client.
It leads to the open state being freed thru release_openowner->
nfs4_free_ol_stateid() and it finds that it still has copynotify
stateid associated with it. We currently print a warning and is
triggerred

WARNING: CPU: 1 PID: 8858 at fs/nfsd/nfs4state.c:1550 nfs4_free_ol_stateid+0xb0/0x100 [nfsd]

This patch, instead, frees the associated copynotify stateid here.

If the parent stateid is freed (without freeing the copynotify
stateids associated with it), it leads to the list corruption
when laundromat ends up freeing the copynotify state later.

[ 1626.839430] Internal error: Oops - BUG: 00000000f2000800 [khadas#1]  SMP
[ 1626.842828] Modules linked in: nfnetlink_queue nfnetlink_log bluetooth cfg80211 rpcrdma rdma_cm iw_cm ib_cm ib_core nfsd nfs_acl lockd grace nfs_localio ext4 crc16 mbcache jbd2 overlay uinput snd_seq_dummy snd_hrtimer qrtr rfkill vfat fat uvcvideo snd_hda_codec_generic videobuf2_vmalloc videobuf2_memops snd_hda_intel uvc snd_intel_dspcfg videobuf2_v4l2 videobuf2_common snd_hda_codec snd_hda_core videodev snd_hwdep snd_seq mc snd_seq_device snd_pcm snd_timer snd soundcore sg loop auth_rpcgss vsock_loopback vmw_vsock_virtio_transport_common vmw_vsock_vmci_transport vmw_vmci vsock xfs 8021q garp stp llc mrp nvme ghash_ce e1000e nvme_core sr_mod nvme_keyring nvme_auth cdrom vmwgfx drm_ttm_helper ttm sunrpc dm_mirror dm_region_hash dm_log iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi fuse dm_multipath dm_mod nfnetlink
[ 1626.855594] CPU: 2 UID: 0 PID: 199 Comm: kworker/u24:33 Kdump: loaded Tainted: G    B   W           6.17.0-rc7+ khadas#22 PREEMPT(voluntary)
[ 1626.857075] Tainted: [B]=BAD_PAGE, [W]=WARN
[ 1626.857573] Hardware name: VMware, Inc. VMware20,1/VBSA, BIOS VMW201.00V.24006586.BA64.2406042154 06/04/2024
[ 1626.858724] Workqueue: nfsd4 laundromat_main [nfsd]
[ 1626.859304] pstate: 61400005 (nZCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
[ 1626.860010] pc : __list_del_entry_valid_or_report+0x148/0x200
[ 1626.860601] lr : __list_del_entry_valid_or_report+0x148/0x200
[ 1626.861182] sp : ffff8000881d7a40
[ 1626.861521] x29: ffff8000881d7a40 x28: 0000000000000018 x27: ffff0000c2a98200
[ 1626.862260] x26: 0000000000000600 x25: 0000000000000000 x24: ffff8000881d7b20
[ 1626.862986] x23: ffff0000c2a981e8 x22: 1fffe00012410e7d x21: ffff0000920873e8
[ 1626.863701] x20: ffff0000920873e8 x19: ffff000086f22998 x18: 0000000000000000
[ 1626.864421] x17: 20747562202c3839 x16: 3932326636383030 x15: 3030666666662065
[ 1626.865092] x14: 6220646c756f6873 x13: 0000000000000001 x12: ffff60004fd9e4a3
[ 1626.865713] x11: 1fffe0004fd9e4a2 x10: ffff60004fd9e4a2 x9 : dfff800000000000
[ 1626.866320] x8 : 00009fffb0261b5e x7 : ffff00027ecf2513 x6 : 0000000000000001
[ 1626.866938] x5 : ffff00027ecf2510 x4 : ffff60004fd9e4a3 x3 : 0000000000000000
[ 1626.867553] x2 : 0000000000000000 x1 : ffff000096069640 x0 : 000000000000006d
[ 1626.868167] Call trace:
[ 1626.868382]  __list_del_entry_valid_or_report+0x148/0x200 (P)
[ 1626.868876]  _free_cpntf_state_locked+0xd0/0x268 [nfsd]
[ 1626.869368]  nfs4_laundromat+0x6f8/0x1058 [nfsd]
[ 1626.869813]  laundromat_main+0x24/0x60 [nfsd]
[ 1626.870231]  process_one_work+0x584/0x1050
[ 1626.870595]  worker_thread+0x4c4/0xc60
[ 1626.870893]  kthread+0x2f8/0x398
[ 1626.871146]  ret_from_fork+0x10/0x20
[ 1626.871422] Code: aa1303e1 aa1403e3 910e8000 97bc55d7 (d4210000)
[ 1626.871892] SMP: stopping secondary CPUs

Reported-by: rtm@csail.mit.edu
Closes: https://lore.kernel.org/linux-nfs/d8f064c1-a26f-4eed-b4f0-1f7f608f415f@oracle.com/T/#t
Fixes: 624322f ("NFSD add COPY_NOTIFY operation")
Cc: stable@vger.kernel.org
Signed-off-by: Olga Kornievskaia <okorniev@redhat.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
HighwayStar pushed a commit to Lineage-Rockchip/android_kernel_rockchip_kernel-6.1 that referenced this pull request Oct 12, 2026
[ Upstream commit 9a8c4ad ]

The xfstests' test-case generic/498 leaves HFS+ volume
in corrupted state:

sudo ./check generic/498
FSTYP -- hfsplus
PLATFORM -- Linux/x86_64 hfsplus-testing-0001 6.18.0-rc1+ khadas#18 SMP PREEMPT_DYNAMIC Thu Dec 4 12:24:45 PST 2025
MKFS_OPTIONS -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch

generic/498 _check_generic_filesystem: filesystem on /dev/loop51 is inconsistent
(see XFSTESTS-2/xfstests-dev/results//generic/498.full for details)

Ran: generic/498
Failures: generic/498
Failed 1 of 1 tests

sudo fsck.hfsplus -d /dev/loop51
** /dev/loop51
Using cacheBlockSize=32K cacheTotalBlock=1024 cacheSize=32768K.
Executing fsck_hfs (version 540.1-Linux).
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
Invalid leaf record count
(It should be 16 instead of 2)
** Checking multi-linked files.
CheckHardLinks: found 1 pre-Leopard file inodes.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
Verify Status: VIStat = 0x0000, ABTStat = 0x0000 EBTStat = 0x0000
CBTStat = 0x8000 CatStat = 0x00000000
** Repairing volume.
** Rechecking volume.
** Checking non-journaled HFS Plus Volume.
The volume name is untitled
** Checking extents overflow file.
** Checking catalog file.
** Checking multi-linked files.
CheckHardLinks: found 1 pre-Leopard file inodes.
** Checking catalog hierarchy.
** Checking extended attributes file.
** Checking volume bitmap.
** Checking volume information.
** The volume untitled was repaired successfully.

The generic/498 test executes such steps on final phase:

mkdir $SCRATCH_MNT/A
mkdir $SCRATCH_MNT/B
mkdir $SCRATCH_MNT/A/C
touch $SCRATCH_MNT/B/foo
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/B/foo

ln $SCRATCH_MNT/B/foo $SCRATCH_MNT/A/C/foo
$XFS_IO_PROG -c "fsync" $SCRATCH_MNT/A

"Simulate a power failure and mount the filesystem
to check that what we explicitly fsync'ed exists."

_flakey_drop_and_remount

The FSCK tool complains about "Invalid leaf record count".
HFS+ b-tree header contains leaf_count field is updated
by hfs_brec_insert() and hfs_brec_remove(). The hfs_brec_insert()
is involved into hard link creation process. However,
modified in-core leaf_count field is stored into HFS+
b-tree header by hfs_btree_write() method. But,
unfortunately, hfs_btree_write() hasn't been called
by hfsplus_cat_write_inode() and hfsplus_file_fsync()
stores not fully consistent state of the Catalog File's
b-tree.

This patch adds calling hfs_btree_write() method in
the hfsplus_cat_write_inode() with the goal of
storing consistent state of Catalog File's b-tree.
Finally, it makes FSCK tool happy.

sudo ./check generic/498
FSTYP         -- hfsplus
PLATFORM      -- Linux/x86_64 hfsplus-testing-0001 6.18.0-rc1+ khadas#22 SMP PREEMPT_DYNAMIC Sat Dec  6 17:01:31 PST 2025
MKFS_OPTIONS  -- /dev/loop51
MOUNT_OPTIONS -- /dev/loop51 /mnt/scratch

generic/498 33s ...  31s
Ran: generic/498
Passed all 1 tests

Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
cc: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
cc: Yangtao Li <frank.li@vivo.com>
cc: linux-fsdevel@vger.kernel.org
Link: https://lore.kernel.org/r/20251207035821.3863657-1-slava@dubeyko.com
Signed-off-by: Viacheslav Dubeyko <slava@dubeyko.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
HighwayStar pushed a commit to Lineage-Rockchip/android_kernel_rockchip_kernel-6.1 that referenced this pull request Oct 12, 2026
[ Upstream commit 579a752 ]

Syzkaller managed to find a combination of actions that was generating
this warning:

  msk->pm.local_addr_used == 0
  WARNING: net/mptcp/pm_kernel.c:1071 at __mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline], CPU#1: syz.2.17/961
  WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline], CPU#1: syz.2.17/961
  WARNING: net/mptcp/pm_kernel.c:1071 at mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210, CPU#1: syz.2.17/961
  Modules linked in:
  CPU: 1 UID: 0 PID: 961 Comm: syz.2.17 Not tainted 6.19.0-08368-gfafda3b4b06b khadas#22 PREEMPT(full)
  Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.17.0-debian-1.17.0-1build1 04/01/2014
  RIP: 0010:__mark_subflow_endp_available net/mptcp/pm_kernel.c:1071 [inline]
  RIP: 0010:mptcp_nl_remove_subflow_and_signal_addr net/mptcp/pm_kernel.c:1103 [inline]
  RIP: 0010:mptcp_pm_nl_del_addr_doit+0x81d/0x8f0 net/mptcp/pm_kernel.c:1210
  Code: 89 c5 e8 46 30 6f fe e9 21 fd ff ff 49 83 ed 80 e8 38 30 6f fe 4c 89 ef be 03 00 00 00 e8 db 49 df fe eb ac e8 24 30 6f fe 90 <0f> 0b 90 e9 1d ff ff ff e8 16 30 6f fe eb 05 e8 0f 30 6f fe e8 9a
  RSP: 0018:ffffc90001663880 EFLAGS: 00010293
  RAX: ffffffff82de1a6c RBX: 0000000000000000 RCX: ffff88800722b500
  RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
  RBP: ffff8880158b22d0 R08: 0000000000010425 R09: ffffffffffffffff
  R10: ffffffff82de18ba R11: 0000000000000000 R12: ffff88800641a640
  R13: ffff8880158b1880 R14: ffff88801ec3c900 R15: ffff88800641a650
  FS:  00005555722c3500(0000) GS:ffff8880f909d000(0000) knlGS:0000000000000000
  CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007f66346e0f60 CR3: 000000001607c000 CR4: 0000000000350ef0
  Call Trace:
   <TASK>
   genl_family_rcv_msg_doit+0x117/0x180 net/netlink/genetlink.c:1115
   genl_family_rcv_msg net/netlink/genetlink.c:1195 [inline]
   genl_rcv_msg+0x3a8/0x3f0 net/netlink/genetlink.c:1210
   netlink_rcv_skb+0x16d/0x240 net/netlink/af_netlink.c:2550
   genl_rcv+0x28/0x40 net/netlink/genetlink.c:1219
   netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
   netlink_unicast+0x3e9/0x4c0 net/netlink/af_netlink.c:1344
   netlink_sendmsg+0x4aa/0x5b0 net/netlink/af_netlink.c:1894
   sock_sendmsg_nosec net/socket.c:727 [inline]
   __sock_sendmsg+0xc9/0xf0 net/socket.c:742
   ____sys_sendmsg+0x272/0x3b0 net/socket.c:2592
   ___sys_sendmsg+0x2de/0x320 net/socket.c:2646
   __sys_sendmsg net/socket.c:2678 [inline]
   __do_sys_sendmsg net/socket.c:2683 [inline]
   __se_sys_sendmsg net/socket.c:2681 [inline]
   __x64_sys_sendmsg+0x110/0x1a0 net/socket.c:2681
   do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
   do_syscall_64+0x143/0x440 arch/x86/entry/syscall_64.c:94
   entry_SYSCALL_64_after_hwframe+0x77/0x7f
  RIP: 0033:0x7f66346f826d
  Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
  RSP: 002b:00007ffc83d8bdc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
  RAX: ffffffffffffffda RBX: 00007f6634985fa0 RCX: 00007f66346f826d
  RDX: 00000000040000b0 RSI: 0000200000000740 RDI: 0000000000000007
  RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
  R10: 0000000000000000 R11: 0000000000000246 R12: 00007f6634985fa8
  R13: 00007f6634985fac R14: 0000000000000000 R15: 0000000000001770
   </TASK>

The actions that caused that seem to be:

 - Set the MPTCP subflows limit to 0
 - Create an MPTCP endpoint with both the 'signal' and 'subflow' flags
 - Create a new MPTCP connection from a different address: an ADD_ADDR
   linked to the MPTCP endpoint will be sent ('signal' flag), but no
   subflows is initiated ('subflow' flag)
 - Remove the MPTCP endpoint

In this case, msk->pm.local_addr_used has been kept to 0 -- because no
subflows have been created -- but the corresponding bit in
msk->pm.id_avail_bitmap has been cleared when the ADD_ADDR has been
sent. This later causes a splat when removing the MPTCP endpoint because
msk->pm.local_addr_used has been kept to 0.

Now, if an endpoint has both the signal and subflow flags, but it is not
possible to create subflows because of the limits or the c-flag case,
then the local endpoint counter is still incremented: the endpoint is
used at the end. This avoids issues later when removing the endpoint and
calling __mark_subflow_endp_available(), which expects
msk->pm.local_addr_used to have been previously incremented if the
endpoint was marked as used according to msk->pm.id_avail_bitmap.

Note that signal_and_subflow variable is reset to false when the limits
and the c-flag case allows subflows creation. Also, local_addr_used is
only incremented for non ID0 subflows.

Fixes: 85df533 ("mptcp: pm: do not ignore 'subflow' if 'signal' flag is also set")
Cc: stable@vger.kernel.org
Closes: multipath-tcp/mptcp_net-next#613
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260303-net-mptcp-misc-fixes-7-0-rc2-v1-4-4b5462b6f016@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
[ pm_kernel.c => pm_netlink.c ]
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment

Labels

None yet

Projects

None yet

Development

Successfully merging this pull request may close these issues.

2 participants