Not able to work with motors #69

Activity

1. ValorNaram commented on May 19, 2016

   

   ValorNaram

   on May 19, 2016

   More actions

   run cd /sys/class/tacho-motor and dir and paste the output.
   If you don't see motor0 and so on, then check the wires on the motor.
   And try these steps:

   1. shutdown your robot
   2. disconnect all wires from your brick
   3. boot ev3dev
   4. if boot has finish, then connect the motors using the wires on your brick and run cd /sys/class/tacho-motor and dir again and paste the output too, if an output appears.
2. liam-b commented on Sep 2, 2016

   

   liam-b

   on Sep 2, 2016

   More actions

   Are you sure you've downloaded and imported lang-python correctly?
   Also this should work:

   import ev3dev.ev3 as ev3
   myMotor = ev3.LargeMotor('outA') # ports are from 'outA' to 'outD'
   # do things with myMotor
3. dlech commented on Sep 3, 2016

   

   dlech

   on Sep 3, 2016

   More actions

   @liam-b, I think you have "python-ev3" (this repository) confused with "ev3dev-lang-python" (https://github.com/rhempel/ev3dev-lang-python)