bouffalo-cli is a command-line interface utility to interact with the bl602 boot rom
| Feature | Supported |
|---|---|
| Boot rom info | ✅ |
| Converting elf to firmware image | ❎ |
| Medium | Read | Write | Erase | Verify |
|---|---|---|---|---|
| Flash | ❎ | ❎ | ❎ | ❎ |
| RAM | ❎ | ❎ | ❎ | ❎ |
If you want to get the BootROM version and the OTP flags, you can run the following command:
% bouffalo-cli info
And it should print something similar to this (output is from a new DT-BL10 board):
Using serial device "/dev/ttyUSB0"
BootROM version: 1
OTP flags:
00000000 00000000 00000000 00000000
00000011 00000000 00000000 00000000
01011000 10011110 00000010 01000010
11101000 10110100 00011101 00000000