You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Before the pico plate is put on the chassis, need to be able test the voltage after the battery is installed to make sure that power is flowing properly through the 3 way connector and the voltage regulator. So, something to connect to one of the ground wires from the battery harness and the white wire from the 3 way connector to prove 9 volts is coming from there and then something to also then connect to the output from the voltage regulator to make sure 5volts is coming from there.
This will help to cut off power issues before putting the plate on.
Activity