Add the ThingsOne Presence Sensor (IC60001-PSC01) Matter Edge driver

[samjin-sw]

Check all that apply

Type of Change

• WWST Certification Request
  • If this is your first time contributing code:
    • I have reviewed the README.md file
    • I have reviewed the CODE_OF_CONDUCT.md file
    • I have signed the CLA
  • I plan on entering a WWST Certification Request or have entered a request through the WWST Certification console at developer.smartthings.com
• Bug fix
• New feature
• Refactor

Checklist

• I have performed a self-review of my code
• I have commented my code in hard-to-understand areas
• I have verified my changes by testing with a device or have communicated a plan for testing
• I am adding new behavior, such as adding a sub-driver, and have added and run new unit tests to cover the new behavior

Description of Change

New Matter driver for the ThingsOne Presence Sensor, model IC60001-PSC01 (VID 0x1241, PID 0x8010), a battery-powered (ICD) Matter-over-Thread device: Occupancy Sensor on EP1 (mmWave radar and PIR), Temperature Sensor on EP2, Light Sensor on EP3, Humidity Sensor on EP4 and a battery Power Source on EP5. It uses standard clusters only, with no custom cluster or capability.

Profile ic60001-psc01: presenceSensor, temperatureMeasurement, relativeHumidityMeasurement, illuminanceMeasurement, battery, firmwareUpdate and refresh, category PresenceSensor.

The stock matter-sensor driver covers the measurements but not the two settings this product needs:

• Sensitivity: the standard motionSensitivity preference is written to OccupancySensing.PIRUnoccupiedToOccupiedThreshold on EP1 (1 low, 2 medium, 3 high; "disabled" maps to 1), read back, and rewritten up to three times if the device reports a different value.
• Off delay: the driver keeps "present" for a configurable time after Occupancy drops to 0, and cancels the delay when Occupancy returns to 1.
  The standard tempOffset and humidityOffset preferences are included; a changed offset triggers a re-read of that measurement only.

Open item: the off-delay preference is currently publicguide63260.offDelay, in our developer namespace (10/15/20/25/30 s, 1/2/3/4/5 min, default 10 s; en "Off delay", ko "해제 지연"). We know preferences outside the SmartThings namespace cannot be merged and have asked SmartThings for a stse or certifiedpreferences definition; the driver will switch to that id before merge.

Summary of Completed Tests

• Integration tests (src/test/test_ic60001_psc01.lua): 18/18 - occupancy and off delay (including cancel and a repeated 0), unit conversions, refresh, offset re-reads, sensitivity write, read-back, retry limit and default.
• luacheck with .github/workflows/.luacheckrc: 0 warnings / 0 errors. validate_fingerprints.py, check_profile_categories.py and check_duplicates.py: pass.
• On a device through a development channel: a factory-reset unit onboarded by QR was matched by the manufacturer fingerprint 4673/32784 to this driver and reached PROVISIONED; the subscription delivered all five values; refresh returned values equal to raw attribute reads; occupancy changes were reported over four days; after an external write of mode 1 the driver restored the configured 2.

[CLAassistant]

All committers have signed the CLA.