LED are too dim when using analog write

[spuder]

Thank you for this library. It works perfectly, however the LEDs never seem to get above 50% brightness

#include <singleLEDLibrary.h>
sllib redLed(6);
sllib greenLed(9);
sllib blueLed(10);


void setup() {
  redLed.setOnSingle();
  blueLed.setOffSingle();
  greenLed.setOffSingle();

}

void loop() {
//    redLed.breathSingle(1200);
//    greenLed.breathSingle(1200);
//    blueLed.breathSingle(1200);
}

I suspect what is happening is that digitalWrite range is 0-100 whereas analogWrite range is 0-255.

Here is my setup