Repository navigation
Conversation
The optimized QUE_SLEEP was only programmed on the HWS packet-manager path via a PM4 WRITE_DATA packet, which is skipped when MES is enabled. Add gfx12.1 get_iq_wait_times/build_dequeue_wait_counts_packet_info callbacks and program CP_IQ_WAIT_TIME2 through the MES WRITE_REG op at start_cpsch, per XCC. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The heavy weight shootdown need special handling in MES sched pipe Signed-off-by: Shaoyun Liu <shaoyun.liu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
status_ptr was declared as u64 * but the WB allocation is only one u32. Writing through a u64 * pointer zeroed 8 bytes, corrupting the adjacent WB slot. Fix by using u32 * to match the actual allocation size. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
…down On process teardown, kfd_process_notifier_release_internal() called kfd_process_dequeue_from_all_devices() (which issues the MES SET_SHADER_DEBUGGER process_ctx_flush=1 that retires the process context) before kfd_dbg_trap_disable(). For a process under a debugger, the debug teardown path (kfd_dbg_trap_disable -> kfd_dbg_trap_deactivate) then issues several SET_SHADER_DEBUGGER process_ctx_flush=0 packets (reset wave launch mode, clear debug flags, reset MES debug mode). Because those packets carry the process_context_addr, MES re-adds the process to its scheduler list after the flush had retired it. Teardown then frees proc_ctx_bo, and a later MES scheduling pass dereferences the freed process context, producing a GPUVM page fault (vmid 0, GC_UTCL2) on the freed page. This is intermittent because it depends on an MES pass landing on the process before its GART page is reused. It is specific to the debugger path, where queues are added with skip_process_ctx_clear=1 so the last REMOVE_QUEUE does not clear the context and delisting relies on the flush. Reorder teardown so debug is disabled first, and the process context is flushed/retired last, so nothing re-adds the process after it is retired. kfd_dbg_trap_disable() now runs while queues still exist, which matches the normal live debug-disable ordering. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
GFX12.1 doesn't follow the pair-wise CU mask requirement as is the case for GFX 10,GFX 11 and GFX 12. Currently, the ioctl call is returning error because of this incorrect condition of checking for a pair of CUs to be enabled in the CU mask. Fix the issue by removing this check for GFX 12.1. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For GMC v12.1.0, the IH cookie NodeID spacing is 8 (MID0=0x0, MID1=0x8), not 4. The wrong divisor caused NPA page faults (node_id=8) to select mmhub2 instead of the correct mmhub1. Fix the divisor from 4 to 8, and add a comment documenting the NodeID to DIE mapping for reference. Warn once if page fault from the vmhub but vmhub print fault status function not initialized because not all hubs are initialized. Signed-off-by: Philip Yang <Philip.Yang@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
mmhub v4_2_0 used adev->aid_mask as the mid_mask when programming MMHUB instances. That assumption is not valid for products with more AIDs than MIDs. Track discovered MMHUB instances in mmhub.inst_mask and use that mask for mmhub v4_2_0 programming paths. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <le.ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
gmc v12_1 currently derives the number of mmhub vmhubs from the aid_mask when populating vmhubs_mask. This breaks when mmhub is represented by mid and mmhub inst_mask does not match the aid_mask. Iterate over adev->mmhub.inst_mask instead so vmhubs_mask reflects the discovered mmhub instances. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Mangesh Gadre <Mangesh.Gadre@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The current combination of PTE flags to translate a retry fault into a no-retry fault is not valid for GFX12. Use a valid no-retry PTE flags combination that works for GFX 12. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This reverts commit bfeb7b2. Revert the rev 0x1 (B0) special case for IP_VERSION(12, 1, 0) that forced noretry_default off. Align GFX12.1.0 with the GC >= 10.3.0 noretry default. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Work around this in both the amdgpu GMC and KFD SVM paths by explicitly selecting MTYPE_NC for remote memory when amdgpu_mtype_local is 0. Remove this once rev_id-based AID detection is reliable. Signed-off-by: Alex Sierra <alex.sierra@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Clean up gfx_v12_1_ring_emit_vm_flush function, since PFP_SYNC_ME cmd not support on gc v12_1, and it does not have gfx ring. Signed-off-by: Likun Gao <Likun.Gao@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Update the address mask to support 52-bits addresses when validating the PDE addresses for GFX 12.1. Currently the address mask was incorrect and only permitted 48-bits addresses. Additionally, drop the BUG_ON() and replace it with code to reset the invalid address and valid bit if the address verification fails. This should help generate a page fault instead of crashing the kernel. Signed-off-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Philip Yang <philip.yang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use global SMN addresses for MMHUB v4_2_0 register access across all instances. Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Le Ma <Le.Ma@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VM fault status is 64 bits on gfxhub v12_1 and mmhub v4_2, with fields such as FED located in the upper status register. Add an optional HI32 fault status callback to help identify FED status on gfxhub v12_1 and mmhub v4_2 Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Horatio Zhang <hongkun.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
…e job amdgpu_vm_sdma_update() keeps the number of free dwords of the current job in a local variable. When the job runs out of room it is committed and a new one is allocated, but that local variable is not refreshed and still describes the job which was just submitted. The stale value is then used to decide how many PTEs fit into the new job. If it happens to be copy_pte_num_dw + 7, or one more than that, the result is zero. copy_pte() encodes the transfer size as count * 8 - 1, so a count of zero asks the engine for a 1GB copy starting inside the IB pool. That runs off the end of the pool, faults on the first unmapped GART page above it and hangs the ring. Re-initialize the estimate from the newly allocated job, which is empty and therefore has its full budget available. Cc: stable@vger.kernel.org Signed-off-by: YuBiao Wang <YuBiao.Wang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable translate further for gc v12_1 to resolve the tlb reach issue v2: ensure PTE.P is set to 1 for leaf PTE v3: Do not clear the P bit when it has been set on a PDB0 entry by the common VM update code Signed-off-by: Hawking Zhang <Hawking.Zhang@amd.com> Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Reviewed-by: Horatio Zhang <hongkun.zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the get_rom_offset callback to retrieve the VBIOS ROM offset from REGS_ROM_OFFSET_CTRL for vbios imaging fetching from spirom. Signed-off-by: Le Ma <le.ma@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When VBIOS is not available, fallback to use 100M for refclock value. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Mukul Joshi <mukul.joshi@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The default SMU message timeout may be too short for the
PrepareMp1ForUnload message on smu_v15_0_8, leading to spurious
-ETIME errors under load or slow firmware response conditions.
Introduce SMU_V15_0_8_MSG_TIMEOUT_US (5 seconds) and apply it to:
- smu_v15_0_8_notify_unload(): switch from smu_cmn_send_smc_msg()
to smu_cmn_send_smc_msg_with_params_ext() to pass the explicit
timeout.
v2: Use c2pmsgctl and args directly (Lijo)
Signed-off-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add soc_v1_0 reset handler for mode2 reset v2: Remove XGMI parallel reset dispatch and xgmi_update_topology() call, reset on soc_v1_0 is per-device only. (Lijo) v3: Remove ras as will be plugged later as separate ip. Remove vcn from ip mask as vcn not part of reset sequence yet (Lijo) Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trigger reset init and fini for smu_v15_0_8 Signed-off-by: Asad Kamal <asad.kamal@amd.com> Reviewed-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add dacee_be, ucie_pcs, lsdma aca blocks mapping, add pcs_xgmi aca block info. Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add interrupt manager for handling psp interrupts and callbacks to enable/disable psp interrupts. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Register and add interrupt handler in PSP v15.0.8. Signed-off-by: Lijo Lazar <lijo.lazar@amd.com> Reviewed-by: Felix Kuehling <felix.kuehling@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Enable psp v15_0_8 RAS support. Signed-off-by: Candice Li <candice.li@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add a helper that prints the actual vs expected signature for debugging purpose. Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
MEM_RESERVED_INFO holds the reserved info like size/offset for
firmware usage.
On soc_v1_0, MASTER_DIE_UMF_REGION_ID is to query UMF reserved region
info for master die MPASP. SPECIFIC_PURPOSE_REGION_ID is to query VRAM
base.
v1->v2: convert // to /* */ and move comments ahead of declarations
(per Christian's review)
Suggested-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
On DKMS builds, amdgpu fails with: error: expected specifier-qualifier-list before 'DECLARE_FLEX_ARRAY' from drivers/gpu/drm/amd/include/discovery.h:162. kcl_amdgpu_drm_fb_helper.h includes amdgpu.h, which pulls in amdgpu_discovery.h -> discovery.h where DECLARE_FLEX_ARRAY is used. When kcl_stddef.h is not visible early enough, this macro is undefined at parse time. Fix by including kcl_stddef.h directly in kcl_amdgpu_drm_fb_helper.h, so the dependency is self-contained and no longer sensitive to include order in backport.h. it's caused by 8997539 "drm/amdgpu: add MEM_RESERVED_INFO to discovery table" Signed-off-by: Yang Su <Yang.Su2@amd.com> Reviewed-by: Bob Zhou <Bob.Zhou@amd.com>
Add a NPS_INFO case with check_table=false to skip annoying "invalid ip discovery table id" error. Signed-off-by: Feifei Xu <Feifei.Xu@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com> Suggested-by: Lijo Lazar <lijo.lazar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How] Add dm_test_irq_handler_invalid_source to cover the early return in amdgpu_dm_irq_handler() when dc_interrupt_to_irq_source() cannot map the hardware entry. Reuse the existing unmapped irq_service stub and assert that neither the high- nor the low-context handler is dispatched. Reviewed-by: Roman Li <roman.li@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Change-Id: I68ecdd72515cf6b56bec78c28f43d01071636ff1
Revert commit 067059c28ffb ("drm/amd/display: Fix CalculateFlipSchedule Calculation")
Because it causes some regression
Reviewed-by: Austin Zheng <austin.zheng@amd.com>
Signed-off-by: Samson Tam <samson.tam@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Change-Id: Idd9ee7ebaa646f806d4957b38cad2c4f367f3c42
[Why & How] Always set DISPCLK per surface. Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Change-Id: I2547376e9516ca1b3594b7f2bd5a40154b4c1fba
…nded Requests [Why & How] dcn5_calculate_urgent_burst_factor function is aware of unbounded request mode making the buffer larger Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Change-Id: Ia4737ee044d5f1a758aae90cd909d0b23560774d
Revert commit c3ae66ed0ee3 ("drm/amd/display: Unify CalculateFlipSchedule Logic")
Because it causes some regression
Reviewed-by: Joshua Aberback <joshua.aberback@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Austin Zheng <Austin.Zheng@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Change-Id: I900439316cfa911551462b7f7816e2de6471664b
[Why] DCN6 core mode support/programming call DCN5 and DCN6 calcs functions directly by name. The calcs layer needs one seam the funcs layer can go through instead of hardcoding a generation. [How] Add union dml2_core_calcs holding one function pointer table per generation, plus a calcs field on dml2_core_instance and on the mode support/programming contexts. Add dml2_core_dcn6_calcs.c/.h defining struct dml2_core_dcn6_calcs, a flat table covering every DCN6 calcs function and every DCN5 calcs function DCN6 reuses, and dml2_core_dcn6_calcs_init() to populate it. Call dml2_core_dcn6_calcs_init() from dml2_core_dcn6_funcs_initialize(). Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Change-Id: Ic1e95024f1baa7884f2811e3e6d45469317bc578
…er table [Why] dml2_core_dcn6_funcs_mode_support.c called DCN5 and DCN6 calcs functions directly by name, coupling the mode support flow to specific generations. Routing through the calcs table lets a future core generation reuse this flow without editing it. [How] Add a static get_calcs(ctx) helper returning ctx->calcs->dcn6. Replace every direct dcn5_*/dcn6_* calcs call with get_calcs(ctx)->slot(...). Assign calc_ms_ctx->calcs from core->calcs when the context is built. Drop the now-unused dml2_core_dcn5_calcs_dchub.h, dml2_core_dcn5_calcs_display_pipe.h, and dml2_core_dcn6_calcs_dchub.h includes in favor of dml2_core_dcn6_calcs.h. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Change-Id: Iea783566e30c23b834ccf216c99496301aa87b20
…ointer table [Why] dml2_core_dcn6_funcs_mode_programming.c called DCN5 and DCN6 calcs functions directly by name, coupling the mode programming flow to specific generations. Routing through the calcs table lets a future core generation reuse this flow without editing it. [How] Add a static get_calcs(ctx) helper returning ctx->calcs->dcn6. Replace every direct dcn5_*/dcn6_* calcs call with get_calcs(ctx)->slot(...). dcn6_populate_mode_programming() did not previously receive the mp context, so thread calc_mp_ctx through it to reach get_calcs() for its three calcs calls. Assign ctx->calcs from core->calcs in dcn6_mp_build_calculate_mp_context(). Drop the now-unused dml2_core_dcn5_calcs_dchub.h, dml2_core_dcn5_calcs_display_pipe.h, and dml2_core_dcn6_calcs_dchub.h includes in favor of dml2_core_dcn6_calcs.h. Reviewed-by: Austin Zheng <austin.zheng@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Change-Id: I4dad38cf4a2a9ead921e4c6f814a27313be9e687
[Why & How] Update fields used for mode support. Also expose some functions so they can be re-used for future products Reviewed-by: Dillon Varone <dillon.varone@amd.com> Signed-off-by: Austin Zheng <Austin.Zheng@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Change-Id: I24ecf6094dce531e0891f8f1fdd27b306b0abd33
[Why & How]
amdgpu_dm_update_freesync_state_on_stream() keyed the VTEM guard off
new_stream->sink->sink_signal, but new_stream->sink can be NULL, leading
to a NULL pointer dereference.
Use new_stream->signal instead, which is a direct field of the already
validated new_stream and carries the same HDMI signal type. This matches
the ALLM block in the same function, which already uses new_stream->signal.
Fixes: fabf2169cb45 ("drm/amd/display: Emit VTEM for HF-VSDB VRR on TMDS links")
Reviewed-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Change-Id: I3c6c3561dbad439a412ddae5009aacd39a8c7e70
[Why] In cm3_helper_translate_curve_to_degamma_hw_format(), seg_distr[] and the loop counter k are uint32_t, while -1, region_start/region_end and i are signed. Comparing them relies on implicit integer conversions, which some compilers diagnose and which obscures the intent of the comparisons. [How] Add explicit casts so the signedness of each comparison is stated in the code. No functional change. Assisted-by: Copilot:Claude-Opus-5 Reviewed-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Alex Hung <alex.hung@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Change-Id: Ic929f2ce6cbdeea07cd2cf16bd12fbaa3189f4ae
[Why & How] Update DMUB related command structure. Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Change-Id: I7ee9e859b36f8a608ba1fbb0121cbaf6cb39e4f9
This version brings along the following updates: - Ensure requested LSDMA bandwidth stays within the SOP bound. - Refactor DC_SEND_CURSOR_INFO_TO_DMU to drop the pipe_ctx param. - Add an override for LSDMA bandwidth in the QoS table. - Expand amdgpu_dm KUnit coverage across vblank IRQ, self-refresh, GPU reset, plane update, MST resume, cached suspend state, writeback transitions, atomic validation, connector-state restore, EDID CEA parsing and DM IRQ source handling. - Keep streamclk gating off when enabling streamclk. - Remove unnecessary includes. - Set mpc_tree_params->opp_id during OPP resource construct. - Add override capability for UTM table params. - Add immediate restore to FAMS2 for DRR. - Fix missing APG registers for DCN60 HDMI. - Exit IPS before connector detection on resume. - Fix HF-VSDB DSC bpc detection to be cumulative. - Fix unused params in flip schedule. - Enable the FW locality check in DCN6. - Fix DC Hub reference frequency assert range. - Dump clock registers in HW init instead of SW init. - Validate the IRQ source in the DM IRQ handler. - Revert "Fix CalculateFlipSchedule Calculation". - Assorted DML updates. - Update urgent burst calculation to account for unbounded requests. - Add a stressed peak-bandwidth probe with DMA contention. - Revert "Unify CalculateFlipSchedule Logic". Acked-by: Tom Chung <chiahsuan.chung@amd.com> Signed-off-by: Taimur Hassan <Syed.Hassan@amd.com> Signed-off-by: Ray Wu <ray.wu@amd.com> Tested-by: Dan Wheeler <daniel.wheeler@amd.com> Change-Id: I21566a57673d8add979908cd40fad05b42644e6d
Convert all of them to the existing ttm_to_amdgpu_ttm_tt() helper, which goes through container_of() and is checked at build time. No functional change intended. Signed-off-by: Perry Yuan <perry.yuan@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
GFX 12.1.0 queues are managed by MES, not by the HWS runlist, so the 127 queue limit does not apply. The topology advertises 32 CP queues plus 16 SDMA engines with 6 queues each, so creating every queue needs 128 and the last one fails with -ENOSPC. Signed-off-by: Horatio Zhang <hongkun.zhang@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
This reverts commit f9801da. Signed-off-by: Chengjun Yao <Chengjun.Yao@amd.com>
This reverts commit a2afa41. Signed-off-by: Chengjun Yao <Chengjun.Yao@amd.com>
This reverts commit 2717d56. Signed-off-by: Chengjun Yao <Chengjun.Yao@amd.com>
Signed-off-by: Chengjun Yao <Chengjun.Yao@amd.com>
Signed-off-by: Chengjun Yao <Chengjun.Yao@amd.com>
The critical region v2 patches clear the fw_reserve.p_pf2vf variable after pf2vf data is read the first time. have_atomics_support relies on that variable to check for PCIe atomic ops support. Move have_atomics_support check for SRIOV VFs to be when pf2vf data is read. Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Reviewed-by: Ellen Pan <yunru.pan@amd.com>
The KCL fallback for drm_prime_sg_to_dma_addr_array() calls drm_prime_sg_to_page_addr_arrays() to extract DMA addresses. Older implementations of drm_prime_sg_to_page_addr_arrays() walk each DMA address range using sg->length. This assumes that the physical and DMA views of a scatterlist have identical layouts. That assumption does not hold when DMA mapping merges entries or when ONLY the DMA view is valid. In such cases the fallback can leave DMA address entries unpopulated while still returning success. Use for_each_sg_dma_page() to walk the mapped entries directly. This uses sgt->nents and the DMA length of each entry, matching the semantics of the upstream drm_prime_sg_to_dma_addr_array() implementation. Tested on Linux 5.4.18 with an imported DMA-BUF whose mapped scatterlist provides the DMA view required by the importer. Fixes: faab963 ("drm/amdkcl: fake the drm_prime_sg_to_dma_addr_array") Signed-off-by: Jiaming Fan <fan.jiaming@hotmail.com>
|
@kentrussell This fixes the KCL fallback of |
|
Some context: we hit this while building on the amdgpu DKMS stack on a customer's 5.4.18 kernel. DMA-BUF sharing with an out-of-tree PowerVR driver failed on import, which we traced to this fallback. On compatibility: the fallback is only built on kernels < 5.12 without |
0db4a01 to
4319cc0
Compare
|
@kentrussell Sorry for the noise earlier: the branch had been based on a fork master that still carried 6 unrelated commits (SVM eviction and DCN vblank changes), which made this PR look like a 16-file change with conflicts. I have rebased it onto the current master. It is now a single commit touching only Since this is KCL-only and not applicable to amd-gfx, could you pull it into the internal dkms branch review, like #194? If you do see this, I'd really appreciate a reply either way, whether it's accepted or declined, so I know where it stands. Thanks. |
|
@kentrussell Could you help route this to the KCL team, or point me to the appropriate contact or submission channel for KCL-only fixes? I understand this repository is a mirror. Thanks. |
Motivation
The KCL fallback for
drm_prime_sg_to_dma_addr_array()callsdrm_prime_sg_to_page_addr_arrays()to extract DMA addresses.Older implementations of
drm_prime_sg_to_page_addr_arrays()walk each DMA address range usingsg->length. This assumes that the physical and DMA views of a scatterlist have identical layouts. That assumption does not hold when DMA mapping merges entries or when ONLY the DMA view is valid. In such cases the fallback can leave DMA address entries unpopulated while still returning success.Fixes: faab963 ("drm/amdkcl: fake the drm_prime_sg_to_dma_addr_array")
Technical Details
Use
for_each_sg_dma_page()to walk the mapped entries directly. This usessgt->nentsand the DMA length of each entry, matching the semantics of the upstreamdrm_prime_sg_to_dma_addr_array()implementation.Test Plan
Import a DMA-BUF whose mapped scatterlist provides the DMA view required by the importer on Linux 5.4.18.
Test Result
Before this change, the DMA address array was incomplete and the import failed. After this change, the expected DMA addresses were populated and the import succeeded
Submission Checklist