Hyperloop lighting board

Overview

The lighting-control board will connect a small uC to a series of relays in order to turn on and off lights in the pod. In addition to this, the uC will connect to a CAN interface chip in order to communicate with the rest of the pod. A small board is required to encompass all of this.

Useful links

• CAN interface chip.
• AT-TINY 84 Microcontroller.

Specifications

• Board must be fairly compact
• Board must interface 5 relays
• Board must contain a socket for an ATTiny84 uC (chip is removable for programming)
• Board must contain a MCP2515 CAN interface chip

Deliverables

A board which follows the schematic found in the Light Unit folder and conforms to the specifications set out above.

Minor changes to the schematic can be made if deemed necessary!