crash: Disable SNP on crashkernel kexec by Mimoja · Pull Request #5 · AMDESE/linux

Mimoja · 2023-08-03T18:09:35Z

Context

We are running a backported version of the SNP host patches. We are not yet aligned with rfc-v9. We are building the snp support into the kernel instead of including it as a module

Issue

We discovered that in case of a crash the incomming kdump crashkernel would be unable to boot once SNP was enabled, failing when it copied the outgoing kernels device table:

INFO [    0.006403] AMD-Vi: Copied DEV table from previous kernel.
ALERT [    0.115337] AMD-Vi: Completion-Wait loop timed out
ALERT [    0.224281] AMD-Vi: Completion-Wait loop timed out
ALERT [    0.333225] AMD-Vi: Completion-Wait loop timed out
ALERT [    0.442166] AMD-Vi: Completion-Wait loop timed out
ALERT [    0.551110] AMD-Vi: Completion-Wait loop timed out
ALERT [    0.660057] AMD-Vi: Completion-Wait loop timed out
ALERT [    0.769000] AMD-Vi: Completion-Wait loop timed out
ALERT [    0.877943] AMD-Vi: Completion-Wait loop timed out
ALERT [    0.988170] AMD-Vi: Completion-Wait loop timed out
INFO [    0.988344] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
ALERT [    1.097278] AMD-Vi: Completion-Wait loop timed out
ALERT [    1.206214] AMD-Vi: Completion-Wait loop timed out
ALERT [    1.315151] AMD-Vi: Completion-Wait loop timed out
EMERGENCY [    1.376701] Kernel panic - not syncing: timer doesn't work through Interrupt-remapped IO-APIC

This is happening due to the IRQ remapping configuration causing the crash in io_apic.c::check_timer() following early_enable_iommus().
This signature is therefore just the symptom and not the rootcause of the crashing crashkernel.

Fix

We saw three options here:

We can disable the SNP on the incoming kernel before we load the old IOMMU tables
We disable SNP before we kexec into the crashkernel
We clean the old IOMMU tables

We descided to go with 2) because:

The host kernel has access to the SNP configurations and can mark the IOMMU config pages shared again without too many memory accesses.
The incoming kernel calls amd_iommu_early_init and similiar before the PCI driver for the PSP could ever have a chance to load to do the teardown
The iommu would therefore stll configure irqremapping into a completely nonsensical way leading to lapic init failing
To filter out the SNP bits and bringing the iommu device tables into a sane state appears to us as the more involved and higher-risk approach, especially without immediate access to the hosts iommu data pointers.

Note:

The incoming crashkernel would still not boot in our testing failing on the SNP enablement which we solved for us by kexec-ing with initcall_blacklist=sp_mod_init as we dont need SNP support in the crashkernel:

INFO [    5.253326] tsc: Refined TSC clocksource calibration: 2599.999 MHz
INFO [    5.253333] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a3b2ad7e, max_idle_ns: 440795282337 ns
INFO [    5.253346] clocksource: Switched to clocksource tsc
ALERT [   12.349310] BUG: unable to handle page fault for address: ffff95cb77f75018
ALERT [   12.349316] #PF: supervisor write access in kernel mode
ALERT [   12.349319] #PF: error_code(0x80000003) - RMP violation
INFO [   12.349322] PGD 77201067 P4D 77201067 PUD 77205067 PMD 8000000077e001e3
INFO [   12.349328] SEV-SNP: RMPEntry paddr 0x77e00000: [high=0x0000000000000000 low=0x0000000000000030]
INFO [   12.349348] SEV-SNP: RMPEntry paddr 0x77f22000: [high=0x0000000000000000 low=0x8002000000001005]
INFO [   12.349352] SEV-SNP: RMPEntry paddr 0x77f23000: [high=0x0000000000000000 low=0x8002000000001005]
INFO [   12.349356] SEV-SNP: RMPEntry paddr 0x77f28000: [high=0x0000000000000000 low=0x8002000000001005]
INFO [   12.349360] SEV-SNP: RMPEntry paddr 0x77f29000: [high=0x0000000000000000 low=0x8002000000001005]
INFO [   12.349363] SEV-SNP: RMPEntry paddr 0x77f2e000: [high=0x0000000000000000 low=0x8002000000001005]
INFO [   12.349367] SEV-SNP: RMPEntry paddr 0x77f2f000: [high=0x0000000000000000 low=0x8002000000001005]
WARNING [   12.349383] Oops: 0003 [#1] SMP NOPTI
WARNING [   12.349386] CPU: 0 PID: 0 Comm: swapper/0 Not tainted XXX
WARNING [   12.349390] Hardware name: XXX
WARNING [   12.349397] RIP: 0010:cpuidle_enter_state+0xf0/0x370
[...]
EMERGENCY [   12.349505] Kernel panic - not syncing: Fatal exception
EMERGENCY [   12.349512] Kernel Offset: 0x2e000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
EMERGENCY [   12.349516] ---[ end Kernel panic - not syncing: Fatal exception ]---

The persistence of invalid RMP entries over SNP de-init and re-init seems to us like either an general issue or like an downstream problem. We assume this did not show up during your kexec testing?

=====================================================

Commit message:

The crashkernel is tasked with two problems as it stands right now: During start it will read the SNP enabled IOMMU tables during early init which can cause the lapic configuration to be configured into invalid or unintuitive modes.
This will then cause the crashkernel to panic due to the lapic timer calibration failing or general RCU stalling.
As the crashkernel can not pick up the host kernels PSP/SEV/SNP configuration we are therefore disabeling SNP not only on the normal kexec path but also on crash-kexec.

This needs to be called very early on in the machine teardown as it requires to set per-cpu state.

Signed-off-by: Mimoja git@mimoja.de
Signed-off-by: Johanna 'Mimoja' Amelie Schander mimoja@amazon.com

The crashkernel is tasked with two problems as it stands right now: During start it will read the SNP enabled IOMMU tables during early init which can cause the lapic configuration to be configured into invalid or unintuitive modes. This will then cause the crashkernel to panic due to the lapic timer calibration failing or general RCU stalling. As the crashkernel can not pick up the host kernels PSP/SEV/SNP configuration we are therefore disabeling SNP not only on the normal kexec path but also on crash-kexec. This needs to be called very early on in the machine teardown as it requires to set per-cpu state. Signed-off-by: Mimoja <git@mimoja.de> Signed-off-by: Johanna 'Mimoja' Amelie Schander <mimoja@amazon.com> Reviewed-by: Alexander Graf (AWS) <graf@amazon.de> Reviewed-by: Costin Lupu <lvpv@amazon.nl> Reviewed-by: Roman Kagan <rkagan@amazon.de>

ashkalra · 2023-08-04T00:58:33Z

The persistence of invalid RMP entries over SNP de-init and re-init seems to us like either an general >issue or like an downstream problem. We assume this did not show up during your kexec testing?

Couple of things we want to verify at the start, with reference to backport:

#1: Are you testing with SNP firmware version >= 1.53, this firmware version has a fix to correctly reclaim IOMMU pages after shutdown, to avoid hitting an RMP #PF violation during kexec.

#2: ccp module is invoking the IOMMU shutdown required for SNP.
__sev_snp_shutdown_locked() -> amd_iommu_snp_disable() to transition IOMMU pages from reclaim to hypervisor state.

Mimoja · 2023-08-04T11:31:30Z

Hi, thank you very much for the response :)

We are running 1.54.1
Fetched from
https://developer.amd.com/wp-content/resources/amd_sev_fam19h_model0xh_1.54.01.zip
yes, we cherry-picked "iommu/amd: Add IOMMU_SNP_SHUTDOWN support" cleanly which - together with the proposed calling of said function during crash path - is what enabled the incoming kernel to boot

Is my initial understanding still valid: 1 and 2 are from my perspective two slightly different culprits as 2) is on the outgoing (crashing) codepath and 1) is of importance only when reenabeling SNP later. I'd assume 2) would also apply on normal kexec when the outgoing kernel does not necessarily do device teardown?

Thank you :)

Johanna / Mimoja

ashkalra · 2023-08-04T20:10:10Z

Trying to understand (1) and (2) here:

If i understand it correctly, then this is what you refer to as (2):

INFO [ 5.253326] tsc: Refined TSC clocksource calibration: 2599.999 MHz
INFO [ 5.253333] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a3b2ad7e, max_idle_ns: 440795282337 ns
INFO [ 5.253346] clocksource: Switched to clocksource tsc
ALERT [ 12.349310] BUG: unable to handle page fault for address: ffff95cb77f75018
ALERT [ 12.349316] #PF: supervisor write access in kernel mode
ALERT [ 12.349319] #PF: error_code(0x80000003) - RMP violation
INFO [ 12.349322] PGD 77201067 P4D 77201067 PUD 77205067 PMD 8000000077e001e3
INFO [ 12.349328] SEV-SNP: RMPEntry paddr 0x77e00000: [high=0x0000000000000000 low=0x0000000000000030]
INFO [ 12.349348] SEV-SNP: RMPEntry paddr 0x77f22000: [high=0x0000000000000000 low=0x8002000000001005]
INFO [ 12.349352] SEV-SNP: RMPEntry paddr 0x77f23000: [high=0x0000000000000000 low=0x8002000000001005]
INFO [ 12.349356] SEV-SNP: RMPEntry paddr 0x77f28000: [high=0x0000000000000000 low=0x8002000000001005]
INFO [ 12.349360] SEV-SNP: RMPEntry paddr 0x77f29000: [high=0x0000000000000000 low=0x8002000000001005]
INFO [ 12.349363] SEV-SNP: RMPEntry paddr 0x77f2e000: [high=0x0000000000000000 low=0x8002000000001005]
INFO [ 12.349367] SEV-SNP: RMPEntry paddr 0x77f2f000: [high=0x0000000000000000 low=0x8002000000001005]
WARNING [ 12.349383] Oops: 0003 [#1] SMP NOPTI
WARNING [ 12.349386] CPU: 0 PID: 0 Comm: swapper/0 Not tainted XXX
WARNING [ 12.349390] Hardware name: XXX
WARNING [ 12.349397] RIP: 0010:cpuidle_enter_state+0xf0/0x370
[...]
EMERGENCY [ 12.349505] Kernel panic - not syncing: Fatal exception
EMERGENCY [ 12.349512] Kernel Offset: 0x2e000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
EMERGENCY [ 12.349516] ---[ end Kernel panic - not syncing: Fatal exception ]---

The persistence of invalid RMP entries over SNP de-init and re-init seems to us like either an general >issue or like an downstream problem. We assume this did not show up during your kexec testing?

We do not see this RMP #PF violation in case of our normal kexec testing. As the kexec boot logs (attached below) show SNP shutdown and re-init is happening as part of kexec boot.
Attaching the dmesg logs here :
dmesg_snp_kexec.txt

Mimoja · 2023-08-04T22:28:54Z

Thank you for checking, in that case I'd assume we are either not properly cleaning up on the exit codepath or have an additional issue. I was reffering to the issues the other way round. The RMP violation on the incoming crashkernel was what I was refering to as 2).

We do not see this RMP #PF violation in case of our normal kexec testing. As the kexec boot logs (attached below) show SNP shutdown and re-init is happening as part of kexec boot.

If that works for you lets focus on 1) here, we can still debug our issue internally in case our general direction here is sane.

The PSP/SEV/SNP should / could ideally be teared down in case of a crash.
We are booting with crashkernel=100M and added nr_cpus=1 (among others, but this is most relevant to IRQ remapping, can share the cmdline if needed) to our KDUMP_COMMANDLINE_APPEND equivalent.

All testing was done via crash sysrq similiar to this:

sysctl -w kernel.sysrq=1
echo c > /proc/sysrq-trigger

This is what caused the first error in the initial post.
Thanks for the testing above :)

ashkalra · 2023-08-07T22:33:55Z

I am still trying to reproduce your kdump crashkernel related issues.

Also, will recommend you testing with the latest SNP firmware release from https://www.amd.com/en/developer/sev.html

ashkalra · 2023-08-09T22:12:44Z

Finally, i am able to reproduce the kernel panic/issues you observed with IOMMU driver completion-wait loop timeouts and AVIC/IOMMU interrupt remapping support related issues during kdump.

Now, kdump is tested with non-SNP and in case of kdump boot, the IOMMU (s) are not disabled and re-init and the previously setup DEV configuration (DTEs) is copied over as can be seen in the code below:

static int __init early_amd_iommu_init(void)
{
...
...
/* Disable any previously enabled IOMMUs */
if (!is_kdump_kernel() || amd_iommu_disabled)
disable_iommus();

The PSP/SEV/SNP should / could ideally be teared down in case of a crash.

I agree with this in principle and ideally, we should be tearing down and re-initializing PSP/SNP/IOMMU during kdump boot and we are still debugging what is causing this issue with interrupt remapping and kdump with snp enabled, but as a workaround you can currently test with "intremap=off" in the crashdump kernel command-line.

ashkalra · 2023-08-14T23:21:43Z

We have added support for SEV and SNP SHUTDOWN commands to be invoked and related SEV/SNP cleanups done during a crash using the panic notifier callback interface. This fixes issues with iommu driver's re-initialization of the IOMMU event buffer, PPR log, command buffer, etc., which was earlier causing issues such as the Command-Wait loop timeouts, etc. This also fixes issues related to interrupt remapping. With this patch applied, we are now able to reach the kdump end of flow and makedumpfile execution. I am doing some final cleanups and testing and will share the patch with you to verify kdump on your end.

ashkalra · 2023-08-15T00:02:48Z

Additionally, i think doing SEV/SNP shutdown and related cleanups using crash_kexec_post_notifiers interface is a cleaner implementation than hacking native_machine_crash_shutdown() directly. Also, as interrupts are disabled while executing the panic notifier callback and/or during native_machine_crash_shutdown() execution, the SEV/SNP PSP command execution will timeout and fail, so we need to ensure that we poll for SEV/SNP command completion instead of depending on PSP command completion interrupt.

The cited commit holds encap tbl lock unconditionally when setting up dests. But it may cause the following deadlock: PID: 1063722 TASK: ffffa062ca5d0000 CPU: 13 COMMAND: "handler8" #0 [ffffb14de05b7368] __schedule at ffffffffa1d5aa91 #1 [ffffb14de05b7410] schedule at ffffffffa1d5afdb #2 [ffffb14de05b7430] schedule_preempt_disabled at ffffffffa1d5b528 #3 [ffffb14de05b7440] __mutex_lock at ffffffffa1d5d6cb #4 [ffffb14de05b74e8] mutex_lock_nested at ffffffffa1d5ddeb #5 [ffffb14de05b74f8] mlx5e_tc_tun_encap_dests_set at ffffffffc12f2096 [mlx5_core] #6 [ffffb14de05b7568] post_process_attr at ffffffffc12d9fc5 [mlx5_core] #7 [ffffb14de05b75a0] mlx5e_tc_add_fdb_flow at ffffffffc12de877 [mlx5_core] #8 [ffffb14de05b75f0] __mlx5e_add_fdb_flow at ffffffffc12e0eef [mlx5_core] #9 [ffffb14de05b7660] mlx5e_tc_add_flow at ffffffffc12e12f7 [mlx5_core] #10 [ffffb14de05b76b8] mlx5e_configure_flower at ffffffffc12e1686 [mlx5_core] #11 [ffffb14de05b7720] mlx5e_rep_indr_offload at ffffffffc12e3817 [mlx5_core] #12 [ffffb14de05b7730] mlx5e_rep_indr_setup_tc_cb at ffffffffc12e388a [mlx5_core] #13 [ffffb14de05b7740] tc_setup_cb_add at ffffffffa1ab2ba8 #14 [ffffb14de05b77a0] fl_hw_replace_filter at ffffffffc0bdec2f [cls_flower] #15 [ffffb14de05b7868] fl_change at ffffffffc0be6caa [cls_flower] #16 [ffffb14de05b7908] tc_new_tfilter at ffffffffa1ab71f0 [1031218.028143] wait_for_completion+0x24/0x30 [1031218.028589] mlx5e_update_route_decap_flows+0x9a/0x1e0 [mlx5_core] [1031218.029256] mlx5e_tc_fib_event_work+0x1ad/0x300 [mlx5_core] [1031218.029885] process_one_work+0x24e/0x510 Actually no need to hold encap tbl lock if there is no encap action. Fix it by checking if encap action exists or not before holding encap tbl lock. Fixes: 37c3b9f ("net/mlx5e: Prevent encap offload when neigh update is running") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Vlad Buslov <vladbu@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

ashkalra · 2023-08-16T18:44:07Z

0001-crypto-ccp-Add-panic-notifier-for-SEV-SNP-firmware-s.patch

Please find the attached patch to test kdump fix with SNP.

…l/git/netfilter/nf Florisn Westphal says: ==================== These are netfilter fixes for the *net* tree. First patch resolves a false-positive lockdep splat: rcu_dereference is used outside of rcu read lock. Let lockdep validate that the transaction mutex is locked. Second patch fixes a kdoc warning added in previous PR. Third patch fixes a memory leak: The catchall element isn't disabled correctly, this allows userspace to deactivate the element again. This results in refcount underflow which in turn prevents memory release. This was always broken since the feature was added in 5.13. Patch 4 fixes an incorrect change in the previous pull request: Adding a duplicate key to a set should work if the duplicate key has expired, restore this behaviour. All from myself. Patch #5 resolves an old historic artifact in sctp conntrack: a 300ms timeout for shutdown_ack. Increase this to 3s. From Xin Long. Patch #6 fixes a sysctl data race in ipvs, two threads can clobber the sysctl value, from Sishuai Gong. This is a day-0 bug that predates git history. Patches 7, 8 and 9, from Pablo Neira Ayuso, are also followups for the previous GC rework in nf_tables: The netlink notifier and the netns exit path must both increment the gc worker seqcount, else worker may encounter stale (free'd) pointers. ================ Signed-off-by: David S. Miller <davem@davemloft.net>

Fix an error detected by memory sanitizer: ``` ==4033==WARNING: MemorySanitizer: use-of-uninitialized-value #0 0x55fb0fbedfc7 in read_alias_info tools/perf/util/pmu.c:457:6 #1 0x55fb0fbea339 in check_info_data tools/perf/util/pmu.c:1434:2 #2 0x55fb0fbea339 in perf_pmu__check_alias tools/perf/util/pmu.c:1504:9 #3 0x55fb0fbdca85 in parse_events_add_pmu tools/perf/util/parse-events.c:1429:32 #4 0x55fb0f965230 in parse_events_parse tools/perf/util/parse-events.y:299:6 #5 0x55fb0fbdf6b2 in parse_events__scanner tools/perf/util/parse-events.c:1822:8 #6 0x55fb0fbdf8c1 in __parse_events tools/perf/util/parse-events.c:2094:8 #7 0x55fb0fa8ffa9 in parse_events tools/perf/util/parse-events.h:41:9 #8 0x55fb0fa8ffa9 in test_event tools/perf/tests/parse-events.c:2393:8 #9 0x55fb0fa8f458 in test__pmu_events tools/perf/tests/parse-events.c:2551:15 #10 0x55fb0fa6d93f in run_test tools/perf/tests/builtin-test.c:242:9 #11 0x55fb0fa6d93f in test_and_print tools/perf/tests/builtin-test.c:271:8 #12 0x55fb0fa6d082 in __cmd_test tools/perf/tests/builtin-test.c:442:5 #13 0x55fb0fa6d082 in cmd_test tools/perf/tests/builtin-test.c:564:9 #14 0x55fb0f942720 in run_builtin tools/perf/perf.c:322:11 #15 0x55fb0f942486 in handle_internal_command tools/perf/perf.c:375:8 #16 0x55fb0f941dab in run_argv tools/perf/perf.c:419:2 #17 0x55fb0f941dab in main tools/perf/perf.c:535:3 ``` Fixes: 7b723db ("perf pmu: Be lazy about loading event info files from sysfs") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230914022425.1489035-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>

Sebastian Andrzej Siewior says: ==================== net: hsr: Properly parse HSRv1 supervisor frames. this is a follow-up to https://lore.kernel.org/all/20230825153111.228768-1-lukma@denx.de/ replacing https://lore.kernel.org/all/20230914124731.1654059-1-lukma@denx.de/ by grabing/ adding tags and reposting with a commit message plus a missing __packed to a struct (#2) plus extending the testsuite to sover HSRv1 which is what broke here (#3-#5). HSRv0 is (was) not affected. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Fix the deadlock by refactoring the MR cache cleanup flow to flush the workqueue without holding the rb_lock. This adds a race between cache cleanup and creation of new entries which we solve by denied creation of new entries after cache cleanup started. Lockdep: WARNING: possible circular locking dependency detected [ 2785.326074 ] 6.2.0-rc6_for_upstream_debug_2023_01_31_14_02 #1 Not tainted [ 2785.339778 ] ------------------------------------------------------ [ 2785.340848 ] devlink/53872 is trying to acquire lock: [ 2785.341701 ] ffff888124f8c0c8 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}, at: __flush_work+0xc8/0x900 [ 2785.343403 ] [ 2785.343403 ] but task is already holding lock: [ 2785.344464 ] ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] [ 2785.346273 ] [ 2785.346273 ] which lock already depends on the new lock. [ 2785.346273 ] [ 2785.347720 ] [ 2785.347720 ] the existing dependency chain (in reverse order) is: [ 2785.349003 ] [ 2785.349003 ] -> #1 (&dev->cache.rb_lock){+.+.}-{3:3}: [ 2785.350160 ] __mutex_lock+0x14c/0x15c0 [ 2785.350962 ] delayed_cache_work_func+0x2d1/0x610 [mlx5_ib] [ 2785.352044 ] process_one_work+0x7c2/0x1310 [ 2785.352879 ] worker_thread+0x59d/0xec0 [ 2785.353636 ] kthread+0x28f/0x330 [ 2785.354370 ] ret_from_fork+0x1f/0x30 [ 2785.355135 ] [ 2785.355135 ] -> #0 ((work_completion)(&(&ent->dwork)->work)){+.+.}-{0:0}: [ 2785.356515 ] __lock_acquire+0x2d8a/0x5fe0 [ 2785.357349 ] lock_acquire+0x1c1/0x540 [ 2785.358121 ] __flush_work+0xe8/0x900 [ 2785.358852 ] __cancel_work_timer+0x2c7/0x3f0 [ 2785.359711 ] mlx5_mkey_cache_cleanup+0xfb/0x250 [mlx5_ib] [ 2785.360781 ] mlx5_ib_stage_pre_ib_reg_umr_cleanup+0x16/0x30 [mlx5_ib] [ 2785.361969 ] __mlx5_ib_remove+0x68/0x120 [mlx5_ib] [ 2785.362960 ] mlx5r_remove+0x63/0x80 [mlx5_ib] [ 2785.363870 ] auxiliary_bus_remove+0x52/0x70 [ 2785.364715 ] device_release_driver_internal+0x3c1/0x600 [ 2785.365695 ] bus_remove_device+0x2a5/0x560 [ 2785.366525 ] device_del+0x492/0xb80 [ 2785.367276 ] mlx5_detach_device+0x1a9/0x360 [mlx5_core] [ 2785.368615 ] mlx5_unload_one_devl_locked+0x5a/0x110 [mlx5_core] [ 2785.369934 ] mlx5_devlink_reload_down+0x292/0x580 [mlx5_core] [ 2785.371292 ] devlink_reload+0x439/0x590 [ 2785.372075 ] devlink_nl_cmd_reload+0xaef/0xff0 [ 2785.372973 ] genl_family_rcv_msg_doit.isra.0+0x1bd/0x290 [ 2785.374011 ] genl_rcv_msg+0x3ca/0x6c0 [ 2785.374798 ] netlink_rcv_skb+0x12c/0x360 [ 2785.375612 ] genl_rcv+0x24/0x40 [ 2785.376295 ] netlink_unicast+0x438/0x710 [ 2785.377121 ] netlink_sendmsg+0x7a1/0xca0 [ 2785.377926 ] sock_sendmsg+0xc5/0x190 [ 2785.378668 ] __sys_sendto+0x1bc/0x290 [ 2785.379440 ] __x64_sys_sendto+0xdc/0x1b0 [ 2785.380255 ] do_syscall_64+0x3d/0x90 [ 2785.381031 ] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 2785.381967 ] [ 2785.381967 ] other info that might help us debug this: [ 2785.381967 ] [ 2785.383448 ] Possible unsafe locking scenario: [ 2785.383448 ] [ 2785.384544 ] CPU0 CPU1 [ 2785.385383 ] ---- ---- [ 2785.386193 ] lock(&dev->cache.rb_lock); [ 2785.386940 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.388327 ] lock(&dev->cache.rb_lock); [ 2785.389425 ] lock((work_completion)(&(&ent->dwork)->work)); [ 2785.390414 ] [ 2785.390414 ] *** DEADLOCK *** [ 2785.390414 ] [ 2785.391579 ] 6 locks held by devlink/53872: [ 2785.392341 ] #0: ffffffff84c17a50 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40 [ 2785.393630 ] #1: ffff888142280218 (&devlink->lock_key){+.+.}-{3:3}, at: devlink_get_from_attrs_lock+0x12d/0x2d0 [ 2785.395324 ] #2: ffff8881422d3c38 (&dev->lock_key){+.+.}-{3:3}, at: mlx5_unload_one_devl_locked+0x4a/0x110 [mlx5_core] [ 2785.397322 ] #3: ffffffffa0e59068 (mlx5_intf_mutex){+.+.}-{3:3}, at: mlx5_detach_device+0x60/0x360 [mlx5_core] [ 2785.399231 ] #4: ffff88810e3cb0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 2785.400864 ] #5: ffff88817e8f1260 (&dev->cache.rb_lock){+.+.}-{3:3}, at: mlx5_mkey_cache_cleanup+0x77/0x250 [mlx5_ib] Fixes: b958451 ("RDMA/mlx5: Change the cache structure to an RB-tree") Signed-off-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Michael Guralnik <michaelgur@nvidia.com> Signed-off-by: Leon Romanovsky <leonro@nvidia.com>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Mimoja · 2023-10-18T13:17:45Z

Thank you very much for the efforts, if we find further issues we will let you know! :)

Commit b035f5a ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") allows architectures with non-coherent DMA to define a small ARCH_KMALLOC_MINALIGN (e.g. sizeof(unsigned long long)) and this has been enabled on arm64. With KASAN_HW_TAGS enabled, however, ARCH_SLAB_MINALIGN becomes 16 on arm64 (arch_slab_minalign() dynamically selects it since commit d949a81 ("mm: make minimum slab alignment a runtime property")). This can lead to a situation where kmalloc-8 caches are attempted to be created with a kmem_caches.size aligned to 16. When the cache is mergeable, it can lead to kernel warnings like: sysfs: cannot create duplicate filename '/kernel/slab/:d-0000016' CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.6.0-rc1-00001-gda98843cd306-dirty #5 Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 Call trace: dump_backtrace+0x90/0xe8 show_stack+0x18/0x24 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x24 sysfs_warn_dup+0x64/0x80 sysfs_create_dir_ns+0xe8/0x108 kobject_add_internal+0x98/0x264 kobject_init_and_add+0x8c/0xd8 sysfs_slab_add+0x12c/0x248 slab_sysfs_init+0x98/0x14c do_one_initcall+0x6c/0x1b0 kernel_init_freeable+0x1c0/0x288 kernel_init+0x24/0x1e0 ret_from_fork+0x10/0x20 kobject: kobject_add_internal failed for :d-0000016 with -EEXIST, don't try to register things with the same name in the same directory. SLUB: Unable to add boot slab dma-kmalloc-8 to sysfs Limit the __kmalloc_minalign() return value (used to create the kmalloc-* caches) to arch_slab_minalign() so that kmalloc-8 caches are skipped when KASAN_HW_TAGS is enabled (both config and runtime). Reported-by: Mark Rutland <mark.rutland@arm.com> Fixes: b035f5a ("mm: slab: reduce the kmalloc() minimum alignment if DMA bouncing possible") Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Peter Collingbourne <pcc@google.com> Cc: stable@vger.kernel.org # 6.5.x Signed-off-by: Vlastimil Babka <vbabka@suse.cz>

When scanning namespaces, it is possible to get valid data from the first call to nvme_identify_ns() in nvme_alloc_ns(), but not from the second call in nvme_update_ns_info_block(). In particular, if the NSID becomes inactive between the two commands, a storage device may return a buffer filled with zero as per 4.1.5.1. In this case, we can get a kernel crash due to a divide-by-zero in blk_stack_limits() because ns->lba_shift will be set to zero. PID: 326 TASK: ffff95fec3cd8000 CPU: 29 COMMAND: "kworker/u98:10" #0 [ffffad8f8702f9e0] machine_kexec at ffffffff91c76ec7 #1 [ffffad8f8702fa38] __crash_kexec at ffffffff91dea4fa #2 [ffffad8f8702faf8] crash_kexec at ffffffff91deb788 #3 [ffffad8f8702fb00] oops_end at ffffffff91c2e4bb #4 [ffffad8f8702fb20] do_trap at ffffffff91c2a4ce #5 [ffffad8f8702fb70] do_error_trap at ffffffff91c2a595 #6 [ffffad8f8702fbb0] exc_divide_error at ffffffff928506e6 #7 [ffffad8f8702fbd0] asm_exc_divide_error at ffffffff92a00926 [exception RIP: blk_stack_limits+434] RIP: ffffffff92191872 RSP: ffffad8f8702fc80 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff95efa0c91800 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000001 RBP: 00000000ffffffff R8: ffff95fec7df35a8 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff95fed33c09a8 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffad8f8702fce0] nvme_update_ns_info_block at ffffffffc06d3533 [nvme_core] #9 [ffffad8f8702fd18] nvme_scan_ns at ffffffffc06d6fa7 [nvme_core] This happened when the check for valid data was moved out of nvme_identify_ns() into one of the callers. Fix this by checking in both callers. Link: https://bugzilla.kernel.org/show_bug.cgi?id=218186 Fixes: 0dd6fff ("nvme: bring back auto-removal of deleted namespaces during sequential scan") Cc: stable@vger.kernel.org Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: Keith Busch <kbusch@kernel.org>

When creating ceq_0 during probing irdma, cqp.sc_cqp will be sent as a cqp_request to cqp->sc_cqp.sq_ring. If the request is pending when removing the irdma driver or unplugging its aux device, cqp.sc_cqp will be dereferenced as wrong struct in irdma_free_pending_cqp_request(). PID: 3669 TASK: ffff88aef892c000 CPU: 28 COMMAND: "kworker/28:0" #0 [fffffe0000549e38] crash_nmi_callback at ffffffff810e3a34 #1 [fffffe0000549e40] nmi_handle at ffffffff810788b2 #2 [fffffe0000549ea0] default_do_nmi at ffffffff8107938f #3 [fffffe0000549eb8] do_nmi at ffffffff81079582 #4 [fffffe0000549ef0] end_repeat_nmi at ffffffff82e016b4 [exception RIP: native_queued_spin_lock_slowpath+1291] RIP: ffffffff8127e72b RSP: ffff88aa841ef778 RFLAGS: 00000046 RAX: 0000000000000000 RBX: ffff88b01f849700 RCX: ffffffff8127e47e RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff83857ec0 RBP: ffff88afe3e4efc8 R8: ffffed15fc7c9dfa R9: ffffed15fc7c9dfa R10: 0000000000000001 R11: ffffed15fc7c9df9 R12: 0000000000740000 R13: ffff88b01f849708 R14: 0000000000000003 R15: ffffed1603f092e1 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0000 -- <NMI exception stack> -- #5 [ffff88aa841ef778] native_queued_spin_lock_slowpath at ffffffff8127e72b #6 [ffff88aa841ef7b0] _raw_spin_lock_irqsave at ffffffff82c22aa4 #7 [ffff88aa841ef7c8] __wake_up_common_lock at ffffffff81257363 #8 [ffff88aa841ef888] irdma_free_pending_cqp_request at ffffffffa0ba12cc [irdma] #9 [ffff88aa841ef958] irdma_cleanup_pending_cqp_op at ffffffffa0ba1469 [irdma] #10 [ffff88aa841ef9c0] irdma_ctrl_deinit_hw at ffffffffa0b2989f [irdma] #11 [ffff88aa841efa28] irdma_remove at ffffffffa0b252df [irdma] #12 [ffff88aa841efae8] auxiliary_bus_remove at ffffffff8219afdb #13 [ffff88aa841efb00] device_release_driver_internal at ffffffff821882e6 #14 [ffff88aa841efb38] bus_remove_device at ffffffff82184278 #15 [ffff88aa841efb88] device_del at ffffffff82179d23 #16 [ffff88aa841efc48] ice_unplug_aux_dev at ffffffffa0eb1c14 [ice] #17 [ffff88aa841efc68] ice_service_task at ffffffffa0d88201 [ice] #18 [ffff88aa841efde8] process_one_work at ffffffff811c589a #19 [ffff88aa841efe60] worker_thread at ffffffff811c71ff #20 [ffff88aa841eff10] kthread at ffffffff811d87a0 #21 [ffff88aa841eff50] ret_from_fork at ffffffff82e0022f Fixes: 44d9e52 ("RDMA/irdma: Implement device initialization definitions") Link: https://lore.kernel.org/r/20231130081415.891006-1-lishifeng@sangfor.com.cn Suggested-by: "Ismail, Mustafa" <mustafa.ismail@intel.com> Signed-off-by: Shifeng Li <lishifeng@sangfor.com.cn> Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

When working on LED support for r8169 I got the following lockdep warning. Easiest way to prevent this scenario seems to be to take the RTNL lock before the trigger_data lock in set_device_name(). ====================================================== WARNING: possible circular locking dependency detected 6.7.0-rc2-next-20231124+ #2 Not tainted ------------------------------------------------------ bash/383 is trying to acquire lock: ffff888103aa1c68 (&trigger_data->lock){+.+.}-{3:3}, at: netdev_trig_notify+0xec/0x190 [ledtrig_netdev] but task is already holding lock: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (rtnl_mutex){+.+.}-{3:3}: __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 rtnl_lock+0x12/0x20 set_device_name+0xa9/0x120 [ledtrig_netdev] netdev_trig_activate+0x1a1/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 -> #0 (&trigger_data->lock){+.+.}-{3:3}: __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 __mutex_lock+0x9b/0xb50 mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(rtnl_mutex); lock(&trigger_data->lock); lock(rtnl_mutex); lock(&trigger_data->lock); *** DEADLOCK *** 8 locks held by bash/383: #0: ffff888103ff33f0 (sb_writers#3){.+.+}-{0:0}, at: ksys_write+0x6c/0xf0 #1: ffff888103aa1e88 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0x114/0x210 #2: ffff8881036f1890 (kn->active#82){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x11d/0x210 #3: ffff888108e2c358 (&led_cdev->led_access){+.+.}-{3:3}, at: led_trigger_write+0x30/0x140 #4: ffffffff8cdd9e10 (triggers_list_lock){++++}-{3:3}, at: led_trigger_write+0x75/0x140 #5: ffff888108e2c270 (&led_cdev->trigger_lock){++++}-{3:3}, at: led_trigger_write+0xe3/0x140 #6: ffffffff8cdde3d0 (pernet_ops_rwsem){++++}-{3:3}, at: register_netdevice_notifier+0x1c/0x120 #7: ffffffff8cddf808 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x12/0x20 stack backtrace: CPU: 0 PID: 383 Comm: bash Not tainted 6.7.0-rc2-next-20231124+ #2 Hardware name: Default string Default string/Default string, BIOS ADLN.M6.SODIMM.ZB.CY.015 08/08/2023 Call Trace: <TASK> dump_stack_lvl+0x5c/0xd0 dump_stack+0x10/0x20 print_circular_bug+0x2dd/0x410 check_noncircular+0x131/0x150 __lock_acquire+0x1459/0x25a0 lock_acquire+0xc8/0x2d0 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] __mutex_lock+0x9b/0xb50 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __this_cpu_preempt_check+0x13/0x20 ? netdev_trig_notify+0xec/0x190 [ledtrig_netdev] ? __cancel_work_timer+0x11c/0x1b0 ? __mutex_lock+0x123/0xb50 mutex_lock_nested+0x16/0x20 ? mutex_lock_nested+0x16/0x20 netdev_trig_notify+0xec/0x190 [ledtrig_netdev] call_netdevice_register_net_notifiers+0x5a/0x100 register_netdevice_notifier+0x85/0x120 netdev_trig_activate+0x1d4/0x230 [ledtrig_netdev] led_trigger_set+0x172/0x2c0 ? preempt_count_add+0x49/0xc0 led_trigger_write+0xf1/0x140 sysfs_kf_bin_write+0x5d/0x80 kernfs_fop_write_iter+0x15d/0x210 vfs_write+0x1f0/0x510 ksys_write+0x6c/0xf0 __x64_sys_write+0x14/0x20 do_syscall_64+0x3f/0xf0 entry_SYSCALL_64_after_hwframe+0x6c/0x74 RIP: 0033:0x7f269055d034 Code: c7 00 16 00 00 00 b8 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 80 3d 35 c3 0d 00 00 74 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 48 83 ec 28 48 89 54 24 18 48 RSP: 002b:00007ffddb7ef748 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000007 RCX: 00007f269055d034 RDX: 0000000000000007 RSI: 000055bf5f4af3c0 RDI: 0000000000000001 RBP: 000055bf5f4af3c0 R08: 0000000000000073 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000007 R13: 00007f26906325c0 R14: 00007f269062ff20 R15: 0000000000000000 </TASK> Fixes: d5e0126 ("leds: trigger: netdev: add additional specific link speed mode") Cc: stable@vger.kernel.org Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Acked-by: Lee Jones <lee@kernel.org> Link: https://lore.kernel.org/r/fb5c8294-2a10-4bf5-8f10-3d2b77d2757e@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

As guest_irq is coming from KVM_IRQFD API call, it may trigger crash in svm_update_pi_irte() due to out-of-bounds: crash> bt PID: 22218 TASK: ffff951a6ad74980 CPU: 73 COMMAND: "vcpu8" #0 [ffffb1ba6707fa40] machine_kexec at ffffffff8565b397 #1 [ffffb1ba6707fa90] __crash_kexec at ffffffff85788a6d #2 [ffffb1ba6707fb58] crash_kexec at ffffffff8578995d #3 [ffffb1ba6707fb70] oops_end at ffffffff85623c0d #4 [ffffb1ba6707fb90] no_context at ffffffff856692c9 #5 [ffffb1ba6707fbf8] exc_page_fault at ffffffff85f95b51 #6 [ffffb1ba6707fc50] asm_exc_page_fault at ffffffff86000ace [exception RIP: svm_update_pi_irte+227] RIP: ffffffffc0761b53 RSP: ffffb1ba6707fd08 RFLAGS: 00010086 RAX: ffffb1ba6707fd78 RBX: ffffb1ba66d91000 RCX: 0000000000000001 RDX: 00003c803f63f1c0 RSI: 000000000000019a RDI: ffffb1ba66db2ab8 RBP: 000000000000019a R8: 0000000000000040 R9: ffff94ca41b82200 R10: ffffffffffffffcf R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000001 R14: ffffffffffffffcf R15: 000000000000005f ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ffffb1ba6707fdb8] kvm_irq_routing_update at ffffffffc09f19a1 [kvm] #8 [ffffb1ba6707fde0] kvm_set_irq_routing at ffffffffc09f2133 [kvm] #9 [ffffb1ba6707fe18] kvm_vm_ioctl at ffffffffc09ef544 [kvm] RIP: 00007f143c36488b RSP: 00007f143a4e04b8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 00007f05780041d0 RCX: 00007f143c36488b RDX: 00007f05780041d0 RSI: 000000004008ae6a RDI: 0000000000000020 RBP: 00000000000004e8 R8: 0000000000000008 R9: 00007f05780041e0 R10: 00007f0578004560 R11: 0000000000000246 R12: 00000000000004e0 R13: 000000000000001a R14: 00007f1424001c60 R15: 00007f0578003bc0 ORIG_RAX: 0000000000000010 CS: 0033 SS: 002b Vmx have been fix this in commit 3a8b067 (KVM: VMX: Do not BUG() on out-of-bounds guest IRQ), so we can just copy source from that to fix this. Co-developed-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Liu <liu.yi24@zte.com.cn> Signed-off-by: Yi Wang <wang.yi59@zte.com.cn> Message-Id: <20220309113025.44469-1-wang.yi59@zte.com.cn> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

…pty list If all peers are removed via wg_peer_remove_all(), rather than setting peer_list to empty, the peer is added to a temporary list with a head on the stack of wg_peer_remove_all(). If a netlink dump is resumed and the cursored peer is one that has been removed via wg_peer_remove_all(), it will iterate from that peer and then attempt to dump freed peers. Fix this by instead checking peer->is_dead, which was explictly created for this purpose. Also move up the device_update_lock lockdep assertion, since reading is_dead relies on that. It can be reproduced by a small script like: echo "Setting config..." ip link add dev wg0 type wireguard wg setconf wg0 /big-config ( while true; do echo "Showing config..." wg showconf wg0 > /dev/null done ) & sleep 4 wg setconf wg0 <(printf "[Peer]\nPublicKey=$(wg genkey)\n") Resulting in: BUG: KASAN: slab-use-after-free in __lock_acquire+0x182a/0x1b20 Read of size 8 at addr ffff88811956ec70 by task wg/59 CPU: 2 PID: 59 Comm: wg Not tainted 6.8.0-rc2-debug+ #5 Call Trace: <TASK> dump_stack_lvl+0x47/0x70 print_address_description.constprop.0+0x2c/0x380 print_report+0xab/0x250 kasan_report+0xba/0xf0 __lock_acquire+0x182a/0x1b20 lock_acquire+0x191/0x4b0 down_read+0x80/0x440 get_peer+0x140/0xcb0 wg_get_device_dump+0x471/0x1130 Cc: stable@vger.kernel.org Fixes: e7096c1 ("net: WireGuard secure network tunnel") Reported-by: Lillian Berry <lillian@star-ark.net> Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the corresponding ttm_resource_manager is not allocated. This leads to a crash when trying to read from this file. Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file only when the corresponding ttm_resource_manager is allocated. crash> bt PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep" #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3 #1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a #2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1 #3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1 #4 [ffffb954506b3c70] no_context at ffffffffb2a7e913 #5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c #6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887 #7 [ffffb954506b3d40] page_fault at ffffffffb360116e [exception RIP: ttm_resource_manager_debug+0x11] RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246 RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940 RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000 RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000 R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm] #9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3 RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985 RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003 RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000 R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: af4a25b ("drm/vmwgfx: Add debugfs entries for various ttm resource managers") Cc: <stable@vger.kernel.org> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240312093551.196609-1-jfalempe@redhat.com

…git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patch #1 unlike early commit path stage which triggers a call to abort, an explicit release of the batch is required on abort, otherwise mutex is released and commit_list remains in place. Patch #2 release mutex after nft_gc_seq_end() in commit path, otherwise async GC worker could collect expired objects. Patch #3 flush pending destroy work in module removal path, otherwise UaF is possible. Patch #4 and #6 restrict the table dormant flag with basechain updates to fix state inconsistency in the hook registration. Patch #5 adds missing RCU read side lock to flowtable type to avoid races with module removal. * tag 'nf-24-04-04' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: discard table flag update with pending basechain deletion netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get() netfilter: nf_tables: reject new basechain after table flag update netfilter: nf_tables: flush pending destroy work before exit_net release netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path netfilter: nf_tables: release batch on table validation from abort path ==================== Link: https://lore.kernel.org/r/20240404104334.1627-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Drop support for virtualizing adaptive PEBS, as KVM's implementation is architecturally broken without an obvious/easy path forward, and because exposing adaptive PEBS can leak host LBRs to the guest, i.e. can leak host kernel addresses to the guest. Bug #1 is that KVM doesn't account for the upper 32 bits of IA32_FIXED_CTR_CTRL when (re)programming fixed counters, e.g fixed_ctrl_field() drops the upper bits, reprogram_fixed_counters() stores local variables as u8s and truncates the upper bits too, etc. Bug #2 is that, because KVM _always_ sets precise_ip to a non-zero value for PEBS events, perf will _always_ generate an adaptive record, even if the guest requested a basic record. Note, KVM will also enable adaptive PEBS in individual *counter*, even if adaptive PEBS isn't exposed to the guest, but this is benign as MSR_PEBS_DATA_CFG is guaranteed to be zero, i.e. the guest will only ever see Basic records. Bug #3 is in perf. intel_pmu_disable_fixed() doesn't clear the upper bits either, i.e. leaves ICL_FIXED_0_ADAPTIVE set, and intel_pmu_enable_fixed() effectively doesn't clear ICL_FIXED_0_ADAPTIVE either. I.e. perf _always_ enables ADAPTIVE counters, regardless of what KVM requests. Bug #4 is that adaptive PEBS *might* effectively bypass event filters set by the host, as "Updated Memory Access Info Group" records information that might be disallowed by userspace via KVM_SET_PMU_EVENT_FILTER. Bug #5 is that KVM doesn't ensure LBR MSRs hold guest values (or at least zeros) when entering a vCPU with adaptive PEBS, which allows the guest to read host LBRs, i.e. host RIPs/addresses, by enabling "LBR Entries" records. Disable adaptive PEBS support as an immediate fix due to the severity of the LBR leak in particular, and because fixing all of the bugs will be non-trivial, e.g. not suitable for backporting to stable kernels. Note! This will break live migration, but trying to make KVM play nice with live migration would be quite complicated, wouldn't be guaranteed to work (i.e. KVM might still kill/confuse the guest), and it's not clear that there are any publicly available VMMs that support adaptive PEBS, let alone live migrate VMs that support adaptive PEBS, e.g. QEMU doesn't support PEBS in any capacity. Link: https://lore.kernel.org/all/20240306230153.786365-1-seanjc@google.com Link: https://lore.kernel.org/all/ZeepGjHCeSfadANM@google.com Fixes: c59a1f1 ("KVM: x86/pmu: Add IA32_PEBS_ENABLE MSR emulation for extended PEBS") Cc: stable@vger.kernel.org Cc: Like Xu <like.xu.linux@gmail.com> Cc: Mingwei Zhang <mizhang@google.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: Zhang Xiong <xiong.y.zhang@intel.com> Cc: Lv Zhiyuan <zhiyuan.lv@intel.com> Cc: Dapeng Mi <dapeng1.mi@intel.com> Cc: Jim Mattson <jmattson@google.com> Acked-by: Like Xu <likexu@tencent.com> Link: https://lore.kernel.org/r/20240307005833.827147-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>

…git/netfilter/nf netfilter pull request 24-04-11 Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Patches #1 and #2 add missing rcu read side lock when iterating over expression and object type list which could race with module removal. Patch #3 prevents promisc packet from visiting the bridge/input hook to amend a recent fix to address conntrack confirmation race in br_netfilter and nf_conntrack_bridge. Patch #4 adds and uses iterate decorator type to fetch the current pipapo set backend datastructure view when netlink dumps the set elements. Patch #5 fixes removal of duplicate elements in the pipapo set backend. Patch #6 flowtable validates pppoe header before accessing it. Patch #7 fixes flowtable datapath for pppoe packets, otherwise lookup fails and pppoe packets follow classic path. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

On the time to free xbc memory in xbc_exit(), memblock may has handed over memory to buddy allocator. So it doesn't make sense to free memory back to memblock. memblock_free() called by xbc_exit() even causes UAF bugs on architectures with CONFIG_ARCH_KEEP_MEMBLOCK disabled like x86. Following KASAN logs shows this case. This patch fixes the xbc memory free problem by calling memblock_free() in early xbc init error rewind path and calling memblock_free_late() in xbc exit path to free memory to buddy allocator. [ 9.410890] ================================================================== [ 9.418962] BUG: KASAN: use-after-free in memblock_isolate_range+0x12d/0x260 [ 9.426850] Read of size 8 at addr ffff88845dd30000 by task swapper/0/1 [ 9.435901] CPU: 9 PID: 1 Comm: swapper/0 Tainted: G U 6.9.0-rc3-00208-g586b5dfb51b9 #5 [ 9.446403] Hardware name: Intel Corporation RPLP LP5 (CPU:RaptorLake)/RPLP LP5 (ID:13), BIOS IRPPN02.01.01.00.00.19.015.D-00000000 Dec 28 2023 [ 9.460789] Call Trace: [ 9.463518] <TASK> [ 9.465859] dump_stack_lvl+0x53/0x70 [ 9.469949] print_report+0xce/0x610 [ 9.473944] ? __virt_addr_valid+0xf5/0x1b0 [ 9.478619] ? memblock_isolate_range+0x12d/0x260 [ 9.483877] kasan_report+0xc6/0x100 [ 9.487870] ? memblock_isolate_range+0x12d/0x260 [ 9.493125] memblock_isolate_range+0x12d/0x260 [ 9.498187] memblock_phys_free+0xb4/0x160 [ 9.502762] ? __pfx_memblock_phys_free+0x10/0x10 [ 9.508021] ? mutex_unlock+0x7e/0xd0 [ 9.512111] ? __pfx_mutex_unlock+0x10/0x10 [ 9.516786] ? kernel_init_freeable+0x2d4/0x430 [ 9.521850] ? __pfx_kernel_init+0x10/0x10 [ 9.526426] xbc_exit+0x17/0x70 [ 9.529935] kernel_init+0x38/0x1e0 [ 9.533829] ? _raw_spin_unlock_irq+0xd/0x30 [ 9.538601] ret_from_fork+0x2c/0x50 [ 9.542596] ? __pfx_kernel_init+0x10/0x10 [ 9.547170] ret_from_fork_asm+0x1a/0x30 [ 9.551552] </TASK> [ 9.555649] The buggy address belongs to the physical page: [ 9.561875] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x1 pfn:0x45dd30 [ 9.570821] flags: 0x200000000000000(node=0|zone=2) [ 9.576271] page_type: 0xffffffff() [ 9.580167] raw: 0200000000000000 ffffea0011774c48 ffffea0012ba1848 0000000000000000 [ 9.588823] raw: 0000000000000001 0000000000000000 00000000ffffffff 0000000000000000 [ 9.597476] page dumped because: kasan: bad access detected [ 9.605362] Memory state around the buggy address: [ 9.610714] ffff88845dd2ff00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.618786] ffff88845dd2ff80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 9.626857] >ffff88845dd30000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.634930] ^ [ 9.638534] ffff88845dd30080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.646605] ffff88845dd30100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 9.654675] ================================================================== Link: https://lore.kernel.org/all/20240414114944.1012359-1-qiang4.zhang@linux.intel.com/ Fixes: 40caa12 ("init: bootconfig: Remove all bootconfig data when the init memory is removed") Cc: Stable@vger.kernel.org Signed-off-by: Qiang Zhang <qiang4.zhang@intel.com> Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org> Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…terface collect_md property on xfrm interfaces can only be set on device creation, thus xfrmi_changelink() should fail when called on such interfaces. The check to enforce this was done only in the case where the xi was returned from xfrmi_locate() which doesn't look for the collect_md interface, and thus the validation was never reached. Calling changelink would thus errornously place the special interface xi in the xfrmi_net->xfrmi hash, but since it also exists in the xfrmi_net->collect_md_xfrmi pointer it would lead to a double free when the net namespace was taken down [1]. Change the check to use the xi from netdev_priv which is available earlier in the function to prevent changes in xfrm collect_md interfaces. [1] resulting oops: [ 8.516540] kernel BUG at net/core/dev.c:12029! [ 8.516552] Oops: invalid opcode: 0000 [#1] SMP NOPTI [ 8.516559] CPU: 0 UID: 0 PID: 12 Comm: kworker/u80:0 Not tainted 6.15.0-virtme #5 PREEMPT(voluntary) [ 8.516565] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 [ 8.516569] Workqueue: netns cleanup_net [ 8.516579] RIP: 0010:unregister_netdevice_many_notify+0x101/0xab0 [ 8.516590] Code: 90 0f 0b 90 48 8b b0 78 01 00 00 48 8b 90 80 01 00 00 48 89 56 08 48 89 32 4c 89 80 78 01 00 00 48 89 b8 80 01 00 00 eb ac 90 <0f> 0b 48 8b 45 00 4c 8d a0 88 fe ff ff 48 39 c5 74 5c 41 80 bc 24 [ 8.516593] RSP: 0018:ffffa93b8006bd30 EFLAGS: 00010206 [ 8.516598] RAX: ffff98fe4226e000 RBX: ffffa93b8006bd58 RCX: ffffa93b8006bc60 [ 8.516601] RDX: 0000000000000004 RSI: 0000000000000000 RDI: dead000000000122 [ 8.516603] RBP: ffffa93b8006bdd8 R08: dead000000000100 R09: ffff98fe4133c100 [ 8.516605] R10: 0000000000000000 R11: 00000000000003d2 R12: ffffa93b8006be00 [ 8.516608] R13: ffffffff96c1a510 R14: ffffffff96c1a510 R15: ffffa93b8006be00 [ 8.516615] FS: 0000000000000000(0000) GS:ffff98fee73b7000(0000) knlGS:0000000000000000 [ 8.516619] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8.516622] CR2: 00007fcd2abd0700 CR3: 000000003aa40000 CR4: 0000000000752ef0 [ 8.516625] PKRU: 55555554 [ 8.516627] Call Trace: [ 8.516632] <TASK> [ 8.516635] ? rtnl_is_locked+0x15/0x20 [ 8.516641] ? unregister_netdevice_queue+0x29/0xf0 [ 8.516650] ops_undo_list+0x1f2/0x220 [ 8.516659] cleanup_net+0x1ad/0x2e0 [ 8.516664] process_one_work+0x160/0x380 [ 8.516673] worker_thread+0x2aa/0x3c0 [ 8.516679] ? __pfx_worker_thread+0x10/0x10 [ 8.516686] kthread+0xfb/0x200 [ 8.516690] ? __pfx_kthread+0x10/0x10 [ 8.516693] ? __pfx_kthread+0x10/0x10 [ 8.516697] ret_from_fork+0x82/0xf0 [ 8.516705] ? __pfx_kthread+0x10/0x10 [ 8.516709] ret_from_fork_asm+0x1a/0x30 [ 8.516718] </TASK> Fixes: abc340b ("xfrm: interface: support collect metadata mode") Reported-by: Lonial Con <kongln9170@gmail.com> Signed-off-by: Eyal Birger <eyal.birger@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

With CONFIG_PROVE_RCU_LIST=y and by executing $ netcat -l --sctp & $ netcat --sctp localhost & $ ss --sctp one can trigger the following Lockdep-RCU splat(s): WARNING: suspicious RCU usage 6.18.0-rc1-00093-g7f864458e9a6 #5 Not tainted ----------------------------- net/sctp/diag.c:76 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ss/215: #0: ffff9c740828bec0 (nlk_cb_mutex-SOCK_DIAG){+.+.}-{4:4}, at: __netlink_dump_start+0x84/0x2b0 #1: ffff9c7401d72cd0 (sk_lock-AF_INET6){+.+.}-{0:0}, at: sctp_sock_dump+0x38/0x200 stack backtrace: CPU: 0 UID: 0 PID: 215 Comm: ss Not tainted 6.18.0-rc1-00093-g7f864458e9a6 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x5d/0x90 lockdep_rcu_suspicious.cold+0x4e/0xa3 inet_sctp_diag_fill.isra.0+0x4b1/0x5d0 sctp_sock_dump+0x131/0x200 sctp_transport_traverse_process+0x170/0x1b0 ? __pfx_sctp_sock_filter+0x10/0x10 ? __pfx_sctp_sock_dump+0x10/0x10 sctp_diag_dump+0x103/0x140 __inet_diag_dump+0x70/0xb0 netlink_dump+0x148/0x490 __netlink_dump_start+0x1f3/0x2b0 inet_diag_handler_cmd+0xcd/0x100 ? __pfx_inet_diag_dump_start+0x10/0x10 ? __pfx_inet_diag_dump+0x10/0x10 ? __pfx_inet_diag_dump_done+0x10/0x10 sock_diag_rcv_msg+0x18e/0x320 ? __pfx_sock_diag_rcv_msg+0x10/0x10 netlink_rcv_skb+0x4d/0x100 netlink_unicast+0x1d7/0x2b0 netlink_sendmsg+0x203/0x450 ____sys_sendmsg+0x30c/0x340 ___sys_sendmsg+0x94/0xf0 __sys_sendmsg+0x83/0xf0 do_syscall_64+0xbb/0x390 entry_SYSCALL_64_after_hwframe+0x77/0x7f ... </TASK> Fixes: 8f840e4 ("sctp: add the sctp_diag.c file") Signed-off-by: Stefan Wiehler <stefan.wiehler@nokia.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@google.com> Acked-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/20251028161506.3294376-2-stefan.wiehler@nokia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Michael Chan says: ==================== bnxt_en: Bug fixes Patches 1, 3, and 4 are bug fixes related to the FW log tracing driver coredump feature recently added in 6.13. Patch #1 adds the necessary call to shutdown the FW logging DMA during PCI shutdown. Patch #3 fixes a possible null pointer derefernce when using early versions of the FW with this feature. Patch #4 adds the coredump header information unconditionally to make it more robust. Patch #2 fixes a possible memory leak during PTP shutdown. Patch #5 eliminates a dmesg warning when doing devlink reload. ==================== Link: https://patch.msgid.link/20251104005700.542174-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

On completion of i915_vma_pin_ww(), a synchronous variant of dma_fence_work_commit() is called. When pinning a VMA to GGTT address space on a Cherry View family processor, or on a Broxton generation SoC with VTD enabled, i.e., when stop_machine() is then called from intel_ggtt_bind_vma(), that can potentially lead to lock inversion among reservation_ww and cpu_hotplug locks. [86.861179] ====================================================== [86.861193] WARNING: possible circular locking dependency detected [86.861209] 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 Tainted: G U [86.861226] ------------------------------------------------------ [86.861238] i915_module_loa/1432 is trying to acquire lock: [86.861252] ffffffff83489090 (cpu_hotplug_lock){++++}-{0:0}, at: stop_machine+0x1c/0x50 [86.861290] but task is already holding lock: [86.861303] ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.862233] which lock already depends on the new lock. [86.862251] the existing dependency chain (in reverse order) is: [86.862265] -> #5 (reservation_ww_class_mutex){+.+.}-{3:3}: [86.862292] dma_resv_lockdep+0x19a/0x390 [86.862315] do_one_initcall+0x60/0x3f0 [86.862334] kernel_init_freeable+0x3cd/0x680 [86.862353] kernel_init+0x1b/0x200 [86.862369] ret_from_fork+0x47/0x70 [86.862383] ret_from_fork_asm+0x1a/0x30 [86.862399] -> #4 (reservation_ww_class_acquire){+.+.}-{0:0}: [86.862425] dma_resv_lockdep+0x178/0x390 [86.862440] do_one_initcall+0x60/0x3f0 [86.862454] kernel_init_freeable+0x3cd/0x680 [86.862470] kernel_init+0x1b/0x200 [86.862482] ret_from_fork+0x47/0x70 [86.862495] ret_from_fork_asm+0x1a/0x30 [86.862509] -> #3 (&mm->mmap_lock){++++}-{3:3}: [86.862531] down_read_killable+0x46/0x1e0 [86.862546] lock_mm_and_find_vma+0xa2/0x280 [86.862561] do_user_addr_fault+0x266/0x8e0 [86.862578] exc_page_fault+0x8a/0x2f0 [86.862593] asm_exc_page_fault+0x27/0x30 [86.862607] filldir64+0xeb/0x180 [86.862620] kernfs_fop_readdir+0x118/0x480 [86.862635] iterate_dir+0xcf/0x2b0 [86.862648] __x64_sys_getdents64+0x84/0x140 [86.862661] x64_sys_call+0x1058/0x2660 [86.862675] do_syscall_64+0x91/0xe90 [86.862689] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.862703] -> #2 (&root->kernfs_rwsem){++++}-{3:3}: [86.862725] down_write+0x3e/0xf0 [86.862738] kernfs_add_one+0x30/0x3c0 [86.862751] kernfs_create_dir_ns+0x53/0xb0 [86.862765] internal_create_group+0x134/0x4c0 [86.862779] sysfs_create_group+0x13/0x20 [86.862792] topology_add_dev+0x1d/0x30 [86.862806] cpuhp_invoke_callback+0x4b5/0x850 [86.862822] cpuhp_issue_call+0xbf/0x1f0 [86.862836] __cpuhp_setup_state_cpuslocked+0x111/0x320 [86.862852] __cpuhp_setup_state+0xb0/0x220 [86.862866] topology_sysfs_init+0x30/0x50 [86.862879] do_one_initcall+0x60/0x3f0 [86.862893] kernel_init_freeable+0x3cd/0x680 [86.862908] kernel_init+0x1b/0x200 [86.862921] ret_from_fork+0x47/0x70 [86.862934] ret_from_fork_asm+0x1a/0x30 [86.862947] -> #1 (cpuhp_state_mutex){+.+.}-{3:3}: [86.862969] __mutex_lock+0xaa/0xed0 [86.862982] mutex_lock_nested+0x1b/0x30 [86.862995] __cpuhp_setup_state_cpuslocked+0x67/0x320 [86.863012] __cpuhp_setup_state+0xb0/0x220 [86.863026] page_alloc_init_cpuhp+0x2d/0x60 [86.863041] mm_core_init+0x22/0x2d0 [86.863054] start_kernel+0x576/0xbd0 [86.863068] x86_64_start_reservations+0x18/0x30 [86.863084] x86_64_start_kernel+0xbf/0x110 [86.863098] common_startup_64+0x13e/0x141 [86.863114] -> #0 (cpu_hotplug_lock){++++}-{0:0}: [86.863135] __lock_acquire+0x1635/0x2810 [86.863152] lock_acquire+0xc4/0x2f0 [86.863166] cpus_read_lock+0x41/0x100 [86.863180] stop_machine+0x1c/0x50 [86.863194] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.863987] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.864735] __vma_bind+0x55/0x70 [i915] [86.865510] fence_work+0x26/0xa0 [i915] [86.866248] fence_notify+0xa1/0x140 [i915] [86.866983] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.867719] i915_sw_fence_commit+0x39/0x60 [i915] [86.868453] i915_vma_pin_ww+0x462/0x1360 [i915] [86.869228] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.870001] initial_plane_vma+0x307/0x840 [i915] [86.870774] intel_initial_plane_config+0x33f/0x670 [i915] [86.871546] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.872330] i915_driver_probe+0x7fa/0xe80 [i915] [86.873057] i915_pci_probe+0xe6/0x220 [i915] [86.873782] local_pci_probe+0x47/0xb0 [86.873802] pci_device_probe+0xf3/0x260 [86.873817] really_probe+0xf1/0x3c0 [86.873833] __driver_probe_device+0x8c/0x180 [86.873848] driver_probe_device+0x24/0xd0 [86.873862] __driver_attach+0x10f/0x220 [86.873876] bus_for_each_dev+0x7f/0xe0 [86.873892] driver_attach+0x1e/0x30 [86.873904] bus_add_driver+0x151/0x290 [86.873917] driver_register+0x5e/0x130 [86.873931] __pci_register_driver+0x7d/0x90 [86.873945] i915_pci_register_driver+0x23/0x30 [i915] [86.874678] i915_init+0x37/0x120 [i915] [86.875347] do_one_initcall+0x60/0x3f0 [86.875369] do_init_module+0x97/0x2a0 [86.875385] load_module+0x2c54/0x2d80 [86.875398] init_module_from_file+0x96/0xe0 [86.875413] idempotent_init_module+0x117/0x330 [86.875426] __x64_sys_finit_module+0x77/0x100 [86.875440] x64_sys_call+0x24de/0x2660 [86.875454] do_syscall_64+0x91/0xe90 [86.875470] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.875486] other info that might help us debug this: [86.875502] Chain exists of: cpu_hotplug_lock --> reservation_ww_class_acquire --> reservation_ww_class_mutex [86.875539] Possible unsafe locking scenario: [86.875552] CPU0 CPU1 [86.875563] ---- ---- [86.875573] lock(reservation_ww_class_mutex); [86.875588] lock(reservation_ww_class_acquire); [86.875606] lock(reservation_ww_class_mutex); [86.875624] rlock(cpu_hotplug_lock); [86.875637] *** DEADLOCK *** [86.875650] 3 locks held by i915_module_loa/1432: [86.875663] #0: ffff888101f5c1b0 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x104/0x220 [86.875699] #1: ffffc90002e0b4a0 (reservation_ww_class_acquire){+.+.}-{0:0}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.876512] #2: ffffc90002e0b4c8 (reservation_ww_class_mutex){+.+.}-{3:3}, at: i915_vma_pin.constprop.0+0x39/0x1d0 [i915] [86.877305] stack backtrace: [86.877326] CPU: 0 UID: 0 PID: 1432 Comm: i915_module_loa Tainted: G U 6.15.0-rc5-CI_DRM_16515-gca0305cadc2d+ #1 PREEMPT(voluntary) [86.877334] Tainted: [U]=USER [86.877336] Hardware name: /NUC5CPYB, BIOS PYBSWCEL.86A.0079.2020.0420.1316 04/20/2020 [86.877339] Call Trace: [86.877344] <TASK> [86.877353] dump_stack_lvl+0x91/0xf0 [86.877364] dump_stack+0x10/0x20 [86.877369] print_circular_bug+0x285/0x360 [86.877379] check_noncircular+0x135/0x150 [86.877390] __lock_acquire+0x1635/0x2810 [86.877403] lock_acquire+0xc4/0x2f0 [86.877408] ? stop_machine+0x1c/0x50 [86.877422] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878173] cpus_read_lock+0x41/0x100 [86.878182] ? stop_machine+0x1c/0x50 [86.878191] ? __pfx_bxt_vtd_ggtt_insert_entries__cb+0x10/0x10 [i915] [86.878916] stop_machine+0x1c/0x50 [86.878927] bxt_vtd_ggtt_insert_entries__BKL+0x3b/0x60 [i915] [86.879652] intel_ggtt_bind_vma+0x43/0x70 [i915] [86.880375] __vma_bind+0x55/0x70 [i915] [86.881133] fence_work+0x26/0xa0 [i915] [86.881851] fence_notify+0xa1/0x140 [i915] [86.882566] __i915_sw_fence_complete+0x8f/0x270 [i915] [86.883286] i915_sw_fence_commit+0x39/0x60 [i915] [86.884003] i915_vma_pin_ww+0x462/0x1360 [i915] [86.884756] ? i915_vma_pin.constprop.0+0x6c/0x1d0 [i915] [86.885513] i915_vma_pin.constprop.0+0x133/0x1d0 [i915] [86.886281] initial_plane_vma+0x307/0x840 [i915] [86.887049] intel_initial_plane_config+0x33f/0x670 [i915] [86.887819] intel_display_driver_probe_nogem+0x1c6/0x260 [i915] [86.888587] i915_driver_probe+0x7fa/0xe80 [i915] [86.889293] ? mutex_unlock+0x12/0x20 [86.889301] ? drm_privacy_screen_get+0x171/0x190 [86.889308] ? acpi_dev_found+0x66/0x80 [86.889321] i915_pci_probe+0xe6/0x220 [i915] [86.890038] local_pci_probe+0x47/0xb0 [86.890049] pci_device_probe+0xf3/0x260 [86.890058] really_probe+0xf1/0x3c0 [86.890067] __driver_probe_device+0x8c/0x180 [86.890072] driver_probe_device+0x24/0xd0 [86.890078] __driver_attach+0x10f/0x220 [86.890083] ? __pfx___driver_attach+0x10/0x10 [86.890088] bus_for_each_dev+0x7f/0xe0 [86.890097] driver_attach+0x1e/0x30 [86.890101] bus_add_driver+0x151/0x290 [86.890107] driver_register+0x5e/0x130 [86.890113] __pci_register_driver+0x7d/0x90 [86.890119] i915_pci_register_driver+0x23/0x30 [i915] [86.890833] i915_init+0x37/0x120 [i915] [86.891482] ? __pfx_i915_init+0x10/0x10 [i915] [86.892135] do_one_initcall+0x60/0x3f0 [86.892145] ? __kmalloc_cache_noprof+0x33f/0x470 [86.892157] do_init_module+0x97/0x2a0 [86.892164] load_module+0x2c54/0x2d80 [86.892168] ? __kernel_read+0x15c/0x300 [86.892185] ? kernel_read_file+0x2b1/0x320 [86.892195] init_module_from_file+0x96/0xe0 [86.892199] ? init_module_from_file+0x96/0xe0 [86.892211] idempotent_init_module+0x117/0x330 [86.892224] __x64_sys_finit_module+0x77/0x100 [86.892230] x64_sys_call+0x24de/0x2660 [86.892236] do_syscall_64+0x91/0xe90 [86.892243] ? irqentry_exit+0x77/0xb0 [86.892249] ? sysvec_apic_timer_interrupt+0x57/0xc0 [86.892256] entry_SYSCALL_64_after_hwframe+0x76/0x7e [86.892261] RIP: 0033:0x7303e1b2725d [86.892271] Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 8b bb 0d 00 f7 d8 64 89 01 48 [86.892276] RSP: 002b:00007ffddd1fdb38 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [86.892281] RAX: ffffffffffffffda RBX: 00005d771d88fd90 RCX: 00007303e1b2725d [86.892285] RDX: 0000000000000000 RSI: 00005d771d893aa0 RDI: 000000000000000c [86.892287] RBP: 00007ffddd1fdbf0 R08: 0000000000000040 R09: 00007ffddd1fdb80 [86.892289] R10: 00007303e1c03b20 R11: 0000000000000246 R12: 00005d771d893aa0 [86.892292] R13: 0000000000000000 R14: 00005d771d88f0d0 R15: 00005d771d895710 [86.892304] </TASK> Call asynchronous variant of dma_fence_work_commit() in that case. v3: Provide more verbose in-line comment (Andi), - mention target environments in commit message. Fixes: 7d1c261 ("drm/i915: Take reservation lock around i915_vma_pin.") Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/14985 Cc: Andi Shyti <andi.shyti@kernel.org> Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com> Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com> Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com> Acked-by: Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com> Link: https://lore.kernel.org/r/20251023082925.351307-6-janusz.krzysztofik@linux.intel.com (cherry picked from commit 648ef13) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Fix a loop scenario of ethx:egress->ethx:egress Example setup to reproduce: tc qdisc add dev ethx root handle 1: drr tc filter add dev ethx parent 1: protocol ip prio 1 matchall \ action mirred egress redirect dev ethx Now ping out of ethx and you get a deadlock: [ 116.892898][ T307] ============================================ [ 116.893182][ T307] WARNING: possible recursive locking detected [ 116.893418][ T307] 6.18.0-rc6-01205-ge05021a829b8-dirty #204 Not tainted [ 116.893682][ T307] -------------------------------------------- [ 116.893926][ T307] ping/307 is trying to acquire lock: [ 116.894133][ T307] ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.894517][ T307] [ 116.894517][ T307] but task is already holding lock: [ 116.894836][ T307] ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.895252][ T307] [ 116.895252][ T307] other info that might help us debug this: [ 116.895608][ T307] Possible unsafe locking scenario: [ 116.895608][ T307] [ 116.895901][ T307] CPU0 [ 116.896057][ T307] ---- [ 116.896200][ T307] lock(&sch->root_lock_key); [ 116.896392][ T307] lock(&sch->root_lock_key); [ 116.896605][ T307] [ 116.896605][ T307] *** DEADLOCK *** [ 116.896605][ T307] [ 116.896864][ T307] May be due to missing lock nesting notation [ 116.896864][ T307] [ 116.897123][ T307] 6 locks held by ping/307: [ 116.897302][ T307] #0: ffff88800b4b0250 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0xb20/0x2cf0 [ 116.897808][ T307] #1: ffffffff88c839c0 (rcu_read_lock){....}-{1:3}, at: ip_output+0xa9/0x600 [ 116.898138][ T307] #2: ffffffff88c839c0 (rcu_read_lock){....}-{1:3}, at: ip_finish_output2+0x2c6/0x1ee0 [ 116.898459][ T307] #3: ffffffff88c83960 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x200/0x3b50 [ 116.898782][ T307] #4: ffff88800c122908 (&sch->root_lock_key){+...}-{3:3}, at: __dev_queue_xmit+0x2210/0x3b50 [ 116.899132][ T307] #5: ffffffff88c83960 (rcu_read_lock_bh){....}-{1:3}, at: __dev_queue_xmit+0x200/0x3b50 [ 116.899442][ T307] [ 116.899442][ T307] stack backtrace: [ 116.899667][ T307] CPU: 2 UID: 0 PID: 307 Comm: ping Not tainted 6.18.0-rc6-01205-ge05021a829b8-dirty #204 PREEMPT(voluntary) [ 116.899672][ T307] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 116.899675][ T307] Call Trace: [ 116.899678][ T307] <TASK> [ 116.899680][ T307] dump_stack_lvl+0x6f/0xb0 [ 116.899688][ T307] print_deadlock_bug.cold+0xc0/0xdc [ 116.899695][ T307] __lock_acquire+0x11f7/0x1be0 [ 116.899704][ T307] lock_acquire+0x162/0x300 [ 116.899707][ T307] ? __dev_queue_xmit+0x2210/0x3b50 [ 116.899713][ T307] ? srso_alias_return_thunk+0x5/0xfbef5 [ 116.899717][ T307] ? stack_trace_save+0x93/0xd0 [ 116.899723][ T307] _raw_spin_lock+0x30/0x40 [ 116.899728][ T307] ? __dev_queue_xmit+0x2210/0x3b50 [ 116.899731][ T307] __dev_queue_xmit+0x2210/0x3b50 Fixes: 178ca30 ("Revert "net/sched: Fix mirred deadlock on device recursion"") Tested-by: Victor Nogueira <victor@mojatatu.com> Signed-off-by: Jamal Hadi Salim <jhs@mojatatu.com> Link: https://patch.msgid.link/20251210162255.1057663-1-jhs@mojatatu.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

The GPIO controller is configured as non-sleeping but it uses generic pinctrl helpers which use a mutex for synchronization. This can cause the following lockdep splat with shared GPIOs enabled on boards which have multiple devices using the same GPIO: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 12, name: kworker/u16:0 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 6 locks held by kworker/u16:0/12: #0: ffff0001f0018d48 ((wq_completion)events_unbound#2){+.+.}-{0:0}, at: process_one_work+0x18c/0x604 #1: ffff8000842dbdf0 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work+0x1b4/0x604 #2: ffff0001f18498f8 (&dev->mutex){....}-{4:4}, at: __device_attach+0x38/0x1b0 #3: ffff0001f75f1e90 (&gdev->srcu){.+.?}-{0:0}, at: gpiod_direction_output_raw_commit+0x0/0x360 #4: ffff0001f46e3db8 (&shared_desc->spinlock){....}-{3:3}, at: gpio_shared_proxy_direction_output+0xd0/0x144 [gpio_shared_proxy] #5: ffff0001f180ee90 (&gdev->srcu){.+.?}-{0:0}, at: gpiod_direction_output_raw_commit+0x0/0x360 irq event stamp: 81450 hardirqs last enabled at (81449): [<ffff8000813acba4>] _raw_spin_unlock_irqrestore+0x74/0x78 hardirqs last disabled at (81450): [<ffff8000813abfb8>] _raw_spin_lock_irqsave+0x84/0x88 softirqs last enabled at (79616): [<ffff8000811455fc>] __alloc_skb+0x17c/0x1e8 softirqs last disabled at (79614): [<ffff8000811455fc>] __alloc_skb+0x17c/0x1e8 CPU: 2 UID: 0 PID: 12 Comm: kworker/u16:0 Not tainted 6.19.0-rc4-next-20260105+ #11975 PREEMPT Hardware name: Hardkernel ODROID-M1 (DT) Workqueue: events_unbound deferred_probe_work_func Call trace: show_stack+0x18/0x24 (C) dump_stack_lvl+0x90/0xd0 dump_stack+0x18/0x24 __might_resched+0x144/0x248 __might_sleep+0x48/0x98 __mutex_lock+0x5c/0x894 mutex_lock_nested+0x24/0x30 pinctrl_get_device_gpio_range+0x44/0x128 pinctrl_gpio_direction+0x3c/0xe0 pinctrl_gpio_direction_output+0x14/0x20 rockchip_gpio_direction_output+0xb8/0x19c gpiochip_direction_output+0x38/0x94 gpiod_direction_output_raw_commit+0x1d8/0x360 gpiod_direction_output_nonotify+0x7c/0x230 gpiod_direction_output+0x34/0xf8 gpio_shared_proxy_direction_output+0xec/0x144 [gpio_shared_proxy] gpiochip_direction_output+0x38/0x94 gpiod_direction_output_raw_commit+0x1d8/0x360 gpiod_direction_output_nonotify+0x7c/0x230 gpiod_configure_flags+0xbc/0x480 gpiod_find_and_request+0x1a0/0x574 gpiod_get_index+0x58/0x84 devm_gpiod_get_index+0x20/0xb4 devm_gpiod_get_optional+0x18/0x30 rockchip_pcie_probe+0x98/0x380 platform_probe+0x5c/0xac really_probe+0xbc/0x298 Fixes: 936ee26 ("gpio/rockchip: add driver for rockchip gpio") Cc: stable@vger.kernel.org Reported-by: Marek Szyprowski <m.szyprowski@samsung.com> Closes: https://lore.kernel.org/all/d035fc29-3b03-4cd6-b8ec-001f93540bc6@samsung.com/ Acked-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20260106090011.21603-1-bartosz.golaszewski@oss.qualcomm.com Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>

Add two flags for KVM_CAP_X2APIC_API to allow userspace to control support for Suppress EOI Broadcasts when using a split IRQCHIP (I/O APIC emulated by userspace), which KVM completely mishandles. When x2APIC support was first added, KVM incorrectly advertised and "enabled" Suppress EOI Broadcast, without fully supporting the I/O APIC side of the equation, i.e. without adding directed EOI to KVM's in-kernel I/O APIC. That flaw was carried over to split IRQCHIP support, i.e. KVM advertised support for Suppress EOI Broadcasts irrespective of whether or not the userspace I/O APIC implementation supported directed EOIs. Even worse, KVM didn't actually suppress EOI broadcasts, i.e. userspace VMMs without support for directed EOI came to rely on the "spurious" broadcasts. KVM "fixed" the in-kernel I/O APIC implementation by completely disabling support for Suppress EOI Broadcasts in commit 0bcc3fb ("KVM: lapic: stop advertising DIRECTED_EOI when in-kernel IOAPIC is in use"), but didn't do anything to remedy userspace I/O APIC implementations. KVM's bogus handling of Suppress EOI Broadcast is problematic when the guest relies on interrupts being masked in the I/O APIC until well after the initial local APIC EOI. E.g. Windows with Credential Guard enabled handles interrupts in the following order: 1. Interrupt for L2 arrives. 2. L1 APIC EOIs the interrupt. 3. L1 resumes L2 and injects the interrupt. 4. L2 EOIs after servicing. 5. L1 performs the I/O APIC EOI. Because KVM EOIs the I/O APIC at step #2, the guest can get an interrupt storm, e.g. if the IRQ line is still asserted and userspace reacts to the EOI by re-injecting the IRQ, because the guest doesn't de-assert the line until step #4, and doesn't expect the interrupt to be re-enabled until step #5. Unfortunately, simply "fixing" the bug isn't an option, as KVM has no way of knowing if the userspace I/O APIC supports directed EOIs, i.e. suppressing EOI broadcasts would result in interrupts being stuck masked in the userspace I/O APIC due to step #5 being ignored by userspace. And fully disabling support for Suppress EOI Broadcast is also undesirable, as picking up the fix would require a guest reboot, *and* more importantly would change the virtual CPU model exposed to the guest without any buy-in from userspace. Add KVM_X2APIC_ENABLE_SUPPRESS_EOI_BROADCAST and KVM_X2APIC_DISABLE_SUPPRESS_EOI_BROADCAST flags to allow userspace to explicitly enable or disable support for Suppress EOI Broadcasts. This gives userspace control over the virtual CPU model exposed to the guest, as KVM should never have enabled support for Suppress EOI Broadcast without userspace opt-in. Not setting either flag will result in legacy quirky behavior for backward compatibility. Disallow fully enabling SUPPRESS_EOI_BROADCAST when using an in-kernel I/O APIC, as KVM's history/support is just as tragic. E.g. it's not clear that commit c806a6a ("KVM: x86: call irq notifiers with directed EOI") was entirely correct, i.e. it may have simply papered over the lack of Directed EOI emulation in the I/O APIC. Note, Suppress EOI Broadcasts is defined only in Intel's SDM, not in AMD's APM. But the bit is writable on some AMD CPUs, e.g. Turin, and KVM's ABI is to support Directed EOI (KVM's name) irrespective of guest CPU vendor. Fixes: 7543a63 ("KVM: x86: Add KVM exit for IOAPIC EOIs") Closes: https://lore.kernel.org/kvm/7D497EF1-607D-4D37-98E7-DAF95F099342@nutanix.com Cc: stable@vger.kernel.org Suggested-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Khushit Shah <khushit.shah@nutanix.com> Link: https://patch.msgid.link/20260123125657.3384063-1-khushit.shah@nutanix.com [sean: clean up minor formatting goofs and fix a comment typo] Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com>

…itives The "valid" readout delay between the two reads of the watchdog is larger than the valid delta between the resulting watchdog and clocksource intervals, which results in false positive watchdog results. Assume TSC is the clocksource and HPET is the watchdog and both have a uncertainty margin of 250us (default). The watchdog readout does: 1) wdnow = read(HPET); 2) csnow = read(TSC); 3) wdend = read(HPET); The valid window for the delta between #1 and #3 is calculated by the uncertainty margins of the watchdog and the clocksource: m = 2 * watchdog.uncertainty_margin + cs.uncertainty margin; which results in 750us for the TSC/HPET case. The actual interval comparison uses a smaller margin: m = watchdog.uncertainty_margin + cs.uncertainty margin; which results in 500us for the TSC/HPET case. That means the following scenario will trigger the watchdog: Watchdog cycle N: 1) wdnow[N] = read(HPET); 2) csnow[N] = read(TSC); 3) wdend[N] = read(HPET); Assume the delay between #1 and #2 is 100us and the delay between #1 and Watchdog cycle N + 1: 4) wdnow[N + 1] = read(HPET); 5) csnow[N + 1] = read(TSC); 6) wdend[N + 1] = read(HPET); If the delay between #4 and #6 is within the 750us margin then any delay between #4 and #5 which is larger than 600us will fail the interval check and mark the TSC unstable because the intervals are calculated against the previous value: wd_int = wdnow[N + 1] - wdnow[N]; cs_int = csnow[N + 1] - csnow[N]; Putting the above delays in place this results in: cs_int = (wdnow[N + 1] + 610us) - (wdnow[N] + 100us); -> cs_int = wd_int + 510us; which is obviously larger than the allowed 500us margin and results in marking TSC unstable. Fix this by using the same margin as the interval comparison. If the delay between two watchdog reads is larger than that, then the readout was either disturbed by interconnect congestion, NMIs or SMIs. Fixes: 4ac1dd3 ("clocksource: Set cs_watchdog_read() checks based on .uncertainty_margin") Reported-by: Daniel J Blueman <daniel@quora.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Paul E. McKenney <paulmck@kernel.org> Tested-by: Paul E. McKenney <paulmck@kernel.org> Link: https://lore.kernel.org/lkml/20250602223251.496591-1-daniel@quora.org/ Link: https://patch.msgid.link/87bjjxc9dq.ffs@tglx

When one iio device is a consumer of another, it is possible that the ->info_exist_lock of both ends up being taken when reading the value of the consumer device. Since they currently belong to the same lockdep class (being initialized in a single location with mutex_init()), that results in a lockdep warning CPU0 ---- lock(&iio_dev_opaque->info_exist_lock); lock(&iio_dev_opaque->info_exist_lock); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by sensors/414: #0: c31fd6dc (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0x44/0x4e4 #1: c4f5a1c4 (&of->mutex){+.+.}-{3:3}, at: kernfs_seq_start+0x1c/0xac #2: c2827548 (kn->active#34){.+.+}-{0:0}, at: kernfs_seq_start+0x30/0xac #3: c1dd2b6 (&iio_dev_opaque->info_exist_lock){+.+.}-{3:3}, at: iio_read_channel_processed_scale+0x24/0xd8 stack backtrace: CPU: 0 UID: 0 PID: 414 Comm: sensors Not tainted 6.17.11 #5 NONE Hardware name: Generic AM33XX (Flattened Device Tree) Call trace: unwind_backtrace from show_stack+0x10/0x14 show_stack from dump_stack_lvl+0x44/0x60 dump_stack_lvl from print_deadlock_bug+0x2b8/0x334 print_deadlock_bug from __lock_acquire+0x13a4/0x2ab0 __lock_acquire from lock_acquire+0xd0/0x2c0 lock_acquire from __mutex_lock+0xa0/0xe8c __mutex_lock from mutex_lock_nested+0x1c/0x24 mutex_lock_nested from iio_read_channel_raw+0x20/0x6c iio_read_channel_raw from rescale_read_raw+0x128/0x1c4 rescale_read_raw from iio_channel_read+0xe4/0xf4 iio_channel_read from iio_read_channel_processed_scale+0x6c/0xd8 iio_read_channel_processed_scale from iio_hwmon_read_val+0x68/0xbc iio_hwmon_read_val from dev_attr_show+0x18/0x48 dev_attr_show from sysfs_kf_seq_show+0x80/0x110 sysfs_kf_seq_show from seq_read_iter+0xdc/0x4e4 seq_read_iter from vfs_read+0x238/0x2e4 vfs_read from ksys_read+0x6c/0xec ksys_read from ret_fast_syscall+0x0/0x1c Just as the mlock_key already has its own lockdep class, add a lock_class_key for the info_exist mutex. Note that this has in theory been a problem since before IIO first left staging, but it only occurs when a chain of consumers is in use and that is not often done. Fixes: ac917a8 ("staging:iio:core set the iio_dev.info pointer to null on unregister under lock.") Signed-off-by: Rasmus Villemoes <ravi@prevas.dk> Reviewed-by: Peter Rosin <peda@axentia.se> Cc: <stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

The `COMEDI_RANGEINFO` ioctl does not work properly for subdevice indices above 15. Currently, the only in-tree COMEDI drivers that support more than 16 subdevices are the "8255" driver and the "comedi_bond" driver. Making the ioctl work for subdevice indices up to 255 is achievable. It needs minor changes to the handling of the `COMEDI_RANGEINFO` and `COMEDI_CHANINFO` ioctls that should be mostly harmless to user-space, apart from making them less broken. Details follow... The `COMEDI_RANGEINFO` ioctl command gets the list of supported ranges (usually with units of volts or milliamps) for a COMEDI subdevice or channel. (Only some subdevices have per-channel range tables, indicated by the `SDF_RANGETYPE` flag in the subdevice information.) It uses a `range_type` value and a user-space pointer, both supplied by user-space, but the `range_type` value should match what was obtained using the `COMEDI_CHANINFO` ioctl (if the subdevice has per-channel range tables) or `COMEDI_SUBDINFO` ioctl (if the subdevice uses a single range table for all channels). Bits 15 to 0 of the `range_type` value contain the length of the range table, which is the only part that user-space should care about (so it can use a suitably sized buffer to fetch the range table). Bits 23 to 16 store the channel index, which is assumed to be no more than 255 if the subdevice has per-channel range tables, and is set to 0 if the subdevice has a single range table. For `range_type` values produced by the `COMEDI_SUBDINFO` ioctl, bits 31 to 24 contain the subdevice index, which is assumed to be no more than 255. But for `range_type` values produced by the `COMEDI_CHANINFO` ioctl, bits 27 to 24 contain the subdevice index, which is assumed to be no more than 15, and bits 31 to 28 contain the COMEDI device's minor device number for some unknown reason lost in the mists of time. The `COMEDI_RANGEINFO` ioctl extract the length from bits 15 to 0 of the user-supplied `range_type` value, extracts the channel index from bits 23 to 16 (only used if the subdevice has per-channel range tables), extracts the subdevice index from bits 27 to 24, and ignores bits 31 to 28. So for subdevice indices 16 to 255, the `COMEDI_SUBDINFO` or `COMEDI_CHANINFO` ioctl will report a `range_type` value that doesn't work with the `COMEDI_RANGEINFO` ioctl. It will either get the range table for the subdevice index modulo 16, or will fail with `-EINVAL`. To fix this, always use bits 31 to 24 of the `range_type` value to hold the subdevice index (assumed to be no more than 255). This affects the `COMEDI_CHANINFO` and `COMEDI_RANGEINFO` ioctls. There should not be anything in user-space that depends on the old, broken usage, although it may now see different values in bits 31 to 28 of the `range_type` values reported by the `COMEDI_CHANINFO` ioctl for subdevices that have per-channel subdevices. User-space should not be trying to decode bits 31 to 16 of the `range_type` values anyway. Fixes: ed9eccb ("Staging: add comedi core") Cc: stable@vger.kernel.org #5.17+ Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://patch.msgid.link/20251203162438.176841-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch fixes an out-of-bounds access in ceph_handle_auth_reply() that can be triggered by a message of type CEPH_MSG_AUTH_REPLY. In ceph_handle_auth_reply(), the value of the payload_len field of such a message is stored in a variable of type int. A value greater than INT_MAX leads to an integer overflow and is interpreted as a negative value. This leads to decrementing the pointer address by this value and subsequently accessing it because ceph_decode_need() only checks that the memory access does not exceed the end address of the allocation. This patch fixes the issue by changing the data type of payload_len to u32. Additionally, the data type of result_msg_len is changed to u32, as it is also a variable holding a non-negative length. Also, an additional layer of sanity checks is introduced, ensuring that directly after reading it from the message, payload_len and result_msg_len are not greater than the overall segment length. BUG: KASAN: slab-out-of-bounds in ceph_handle_auth_reply+0x642/0x7a0 [libceph] Read of size 4 at addr ffff88811404df14 by task kworker/20:1/262 CPU: 20 UID: 0 PID: 262 Comm: kworker/20:1 Not tainted 6.19.2 #5 PREEMPT(voluntary) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: ceph-msgr ceph_con_workfn [libceph] Call Trace: <TASK> dump_stack_lvl+0x76/0xa0 print_report+0xd1/0x620 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? kasan_complete_mode_report_info+0x72/0x210 kasan_report+0xe7/0x130 ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] ? ceph_handle_auth_reply+0x642/0x7a0 [libceph] __asan_report_load_n_noabort+0xf/0x20 ceph_handle_auth_reply+0x642/0x7a0 [libceph] mon_dispatch+0x973/0x23d0 [libceph] ? apparmor_socket_recvmsg+0x6b/0xa0 ? __pfx_mon_dispatch+0x10/0x10 [libceph] ? __kasan_check_write+0x14/0x30i ? mutex_unlock+0x7f/0xd0 ? __pfx_mutex_unlock+0x10/0x10 ? __pfx_do_recvmsg+0x10/0x10 [libceph] ceph_con_process_message+0x1f1/0x650 [libceph] process_message+0x1e/0x450 [libceph] ceph_con_v2_try_read+0x2e48/0x6c80 [libceph] ? __pfx_ceph_con_v2_try_read+0x10/0x10 [libceph] ? save_fpregs_to_fpstate+0xb0/0x230 ? raw_spin_rq_unlock+0x17/0xa0 ? finish_task_switch.isra.0+0x13b/0x760 ? __switch_to+0x385/0xda0 ? __kasan_check_write+0x14/0x30 ? mutex_lock+0x8d/0xe0 ? __pfx_mutex_lock+0x10/0x10 ceph_con_workfn+0x248/0x10c0 [libceph] process_one_work+0x629/0xf80 ? __kasan_check_write+0x14/0x30 worker_thread+0x87f/0x1570 ? __pfx__raw_spin_lock_irqsave+0x10/0x10 ? __pfx_try_to_wake_up+0x10/0x10 ? kasan_print_address_stack_frame+0x1f7/0x280 ? __pfx_worker_thread+0x10/0x10 kthread+0x396/0x830 ? __pfx__raw_spin_lock_irq+0x10/0x10 ? __pfx_kthread+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? recalc_sigpending+0x180/0x210 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3f7/0x610 ? __pfx_ret_from_fork+0x10/0x10 ? __switch_to+0x385/0xda0 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> [ idryomov: replace if statements with ceph_decode_need() for payload_len and result_msg_len ] Cc: stable@vger.kernel.org Signed-off-by: Raphael Zimmer <raphael.zimmer@tu-ilmenau.de> Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

The devm_free_irq() and devm_request_irq() functions should not be executed in an atomic context. During device suspend, all userspace processes and most kernel threads are frozen. Additionally, we flush all tx/rx status, disable all macb interrupts, and halt rx operations. Therefore, it is safe to split the region protected by bp->lock into two independent sections, allowing devm_free_irq() and devm_request_irq() to run in a non-atomic context. This modification resolves the following lockdep warning: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:591 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 501, name: rtcwake preempt_count: 1, expected: 0 RCU nest depth: 1, expected: 0 7 locks held by rtcwake/501: #0: ffff0008038c3408 (sb_writers#5){.+.+}-{0:0}, at: vfs_write+0xf8/0x368 #1: ffff0008049a5e88 (&of->mutex#2){+.+.}-{4:4}, at: kernfs_fop_write_iter+0xbc/0x1c8 #2: ffff00080098d588 (kn->active#70){.+.+}-{0:0}, at: kernfs_fop_write_iter+0xcc/0x1c8 #3: ffff800081c84888 (system_transition_mutex){+.+.}-{4:4}, at: pm_suspend+0x1ec/0x290 #4: ffff0008009ba0f8 (&dev->mutex){....}-{4:4}, at: device_suspend+0x118/0x4f0 #5: ffff800081d00458 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire+0x4/0x48 #6: ffff0008031fb9e0 (&bp->lock){-.-.}-{3:3}, at: macb_suspend+0x144/0x558 irq event stamp: 8682 hardirqs last enabled at (8681): [<ffff8000813c7d7c>] _raw_spin_unlock_irqrestore+0x44/0x88 hardirqs last disabled at (8682): [<ffff8000813c7b58>] _raw_spin_lock_irqsave+0x38/0x98 softirqs last enabled at (7322): [<ffff8000800f1b4c>] handle_softirqs+0x52c/0x588 softirqs last disabled at (7317): [<ffff800080010310>] __do_softirq+0x20/0x2c CPU: 1 UID: 0 PID: 501 Comm: rtcwake Not tainted 7.0.0-rc3-next-20260310-yocto-standard+ #125 PREEMPT Hardware name: ZynqMP ZCU102 Rev1.1 (DT) Call trace: show_stack+0x24/0x38 (C) __dump_stack+0x28/0x38 dump_stack_lvl+0x64/0x88 dump_stack+0x18/0x24 __might_resched+0x200/0x218 __might_sleep+0x38/0x98 __mutex_lock_common+0x7c/0x1378 mutex_lock_nested+0x38/0x50 free_irq+0x68/0x2b0 devm_irq_release+0x24/0x38 devres_release+0x40/0x80 devm_free_irq+0x48/0x88 macb_suspend+0x298/0x558 device_suspend+0x218/0x4f0 dpm_suspend+0x244/0x3a0 dpm_suspend_start+0x50/0x78 suspend_devices_and_enter+0xec/0x560 pm_suspend+0x194/0x290 state_store+0x110/0x158 kobj_attr_store+0x1c/0x30 sysfs_kf_write+0xa8/0xd0 kernfs_fop_write_iter+0x11c/0x1c8 vfs_write+0x248/0x368 ksys_write+0x7c/0xf8 __arm64_sys_write+0x28/0x40 invoke_syscall+0x4c/0xe8 el0_svc_common+0x98/0xf0 do_el0_svc+0x28/0x40 el0_svc+0x54/0x1e0 el0t_64_sync_handler+0x84/0x130 el0t_64_sync+0x198/0x1a0 Fixes: 558e35c ("net: macb: WoL support for GEM type of Ethernet controller") Cc: stable@vger.kernel.org Reviewed-by: Théo Lebrun <theo.lebrun@bootlin.com> Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://patch.msgid.link/20260318-macb-irq-v2-1-f1179768ab24@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When a bio goes through the rq_qos infrastructure on a path's request queue, it gets BIO_QOS_THROTTLED or BIO_QOS_MERGED flags set. These flags indicate that rq_qos_done_bio() should be called on completion to update rq_qos accounting. During path failover in nvme_failover_req(), the bio's bi_bdev is redirected from the failed path's disk to the multipath head's disk via bio_set_dev(). However, the BIO_QOS flags are not cleared. When the bio eventually completes (either successfully via a new path or with an error via bio_io_error()), rq_qos_done_bio() checks for these flags and calls __rq_qos_done_bio(q->rq_qos, bio) where q is obtained from the bio's current bi_bdev - which is now the multipath head's queue, not the original path's queue. The multipath head's queue does not have rq_qos enabled (q->rq_qos is NULL), but the code assumes that if BIO_QOS_* flags are set, q->rq_qos must be valid. This breaks when a bio is moved between queues during NVMe multipath failover, leading to a NULL pointer dereference. Execution Context timeline :- * =====> dd process context [USER] dd process [SYSCALL] write() - dd process context submit_bio() nvme_ns_head_submit_bio() - path selection blk_mq_submit_bio() #### QOS FLAGS SET HERE [USER] dd waits or returns ==== I/O in flight on NVMe hardware ===== ===== End of submission path ==== ------------------------------------------------------ * dd ====> Interrupt context; [IRQ] NVMe completion interrupt nvme_irq() nvme_complete_rq() nvme_failover_req() ### BIO MOVED TO HEAD spin_lock_irqsave (atomic section) bio_set_dev() changes bi_bdev ### BUG: QOS flags NOT cleared kblockd_schedule_work() * Interrupt context =====> kblockd workqueue [WQ] kblockd workqueue - kworker process nvme_requeue_work() submit_bio_noacct() nvme_ns_head_submit_bio() nvme_find_path() returns NULL bio_io_error() bio_endio() rq_qos_done_bio() ### CRASH ### KERNEL PANIC / OOPS Crash from blktests nvme/058 (rapid namespace remapping): [ 1339.636033] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 1339.641025] nvme nvme4: rescanning namespaces. [ 1339.642064] #PF: supervisor read access in kernel mode [ 1339.642067] #PF: error_code(0x0000) - not-present page [ 1339.642070] PGD 0 P4D 0 [ 1339.642073] Oops: Oops: 0000 [#1] SMP NOPTI [ 1339.642078] CPU: 35 UID: 0 PID: 4579 Comm: kworker/35:2H Tainted: G O N 6.17.0-rc3nvme+ #5 PREEMPT(voluntary) [ 1339.642084] Tainted: [O]=OOT_MODULE, [N]=TEST [ 1339.673446] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 1339.682359] Workqueue: kblockd nvme_requeue_work [nvme_core] [ 1339.686613] RIP: 0010:__rq_qos_done_bio+0xd/0x40 [ 1339.690161] Code: 75 dd 5b 5d 41 5c c3 cc cc cc cc 66 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 f5 53 48 89 fb <48> 8b 03 48 8b 40 30 48 85 c0 74 0b 48 89 ee 48 89 df ff d0 0f 1f [ 1339.703691] RSP: 0018:ffffc900066f3c90 EFLAGS: 00010202 [ 1339.706844] RAX: ffff888148b9ef00 RBX: 0000000000000000 RCX: 0000000000000000 [ 1339.711136] RDX: 00000000000001c0 RSI: ffff8882aaab8a80 RDI: 0000000000000000 [ 1339.715691] RBP: ffff8882aaab8a80 R08: 0000000000000000 R09: 0000000000000000 [ 1339.720472] R10: 0000000000000000 R11: fefefefefefefeff R12: ffff8882aa3b6010 [ 1339.724650] R13: 0000000000000000 R14: ffff8882338bcef0 R15: ffff8882aa3b6020 [ 1339.729029] FS: 0000000000000000(0000) GS:ffff88985c0cf000(0000) knlGS:0000000000000000 [ 1339.734525] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1339.738563] CR2: 0000000000000000 CR3: 0000000111045000 CR4: 0000000000350ef0 [ 1339.742750] DR0: ffffffff845ccbec DR1: ffffffff845ccbed DR2: ffffffff845ccbee [ 1339.745630] DR3: ffffffff845ccbef DR6: 00000000ffff0ff0 DR7: 0000000000000600 [ 1339.748488] Call Trace: [ 1339.749512] <TASK> [ 1339.750449] bio_endio+0x71/0x2e0 [ 1339.751833] nvme_ns_head_submit_bio+0x290/0x320 [nvme_core] [ 1339.754073] __submit_bio+0x222/0x5e0 [ 1339.755623] ? rcu_is_watching+0xd/0x40 [ 1339.757201] ? submit_bio_noacct_nocheck+0x131/0x370 [ 1339.759210] submit_bio_noacct_nocheck+0x131/0x370 [ 1339.761189] ? submit_bio_noacct+0x20/0x620 [ 1339.762849] nvme_requeue_work+0x4b/0x60 [nvme_core] [ 1339.764828] process_one_work+0x20e/0x630 [ 1339.766528] worker_thread+0x184/0x330 [ 1339.768129] ? __pfx_worker_thread+0x10/0x10 [ 1339.769942] kthread+0x10a/0x250 [ 1339.771263] ? __pfx_kthread+0x10/0x10 [ 1339.772776] ? __pfx_kthread+0x10/0x10 [ 1339.774381] ret_from_fork+0x273/0x2e0 [ 1339.775948] ? __pfx_kthread+0x10/0x10 [ 1339.777504] ret_from_fork_asm+0x1a/0x30 [ 1339.779163] </TASK> Fix this by clearing both BIO_QOS_THROTTLED and BIO_QOS_MERGED flags when bios are redirected to the multipath head in nvme_failover_req(). This is consistent with the existing code that clears REQ_POLLED and REQ_NOWAIT flags when the bio changes queues. Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://patch.msgid.link/20260226031243.87200-3-kch@nvidia.com Signed-off-by: Jens Axboe <axboe@kernel.dk>

Tariq Toukan says: ==================== devlink: add per-port resource support This series by Or adds devlink per-port resource support: Currently, devlink resources are only available at the device level. However, some resources are inherently per-port, such as the maximum number of subfunctions (SFs) that can be created on a specific PF port. This limitation prevents user space from obtaining accurate per-port capacity information. This series adds infrastructure for per-port resources in devlink core and implements it in the mlx5 driver to expose the max_SFs resource on PF devlink ports. Patch #1 refactors resource functions to be generic Patch #2 adds port-level resource registration infrastructure Patch #3 registers SF resource on PF port representor in mlx5 Patch #4 adds devlink port resource registration to netdevsim for testing Patch #5 adds dump support for device-level resources Patch #6 includes port resources in the resource dump dumpit path Patch #7 adds port-specific option to resource dump doit path Patch #8 adds selftest for devlink port resource doit Patch #9 documents port-level resources and full dump Patch #10 adds resource scope filtering to resource dump Patch #11 adds selftest for resource dump and scope filter Patch #12 documents resource scope filtering ==================== Link: https://patch.msgid.link/20260407194107.148063-1-tariqt@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Currently, the initialization of loongarch_jump_ops does not contain an assignment to its .free field. This causes disasm_line__free() to fall through to ins_ops__delete() for LoongArch jump instructions. ins_ops__delete() will free ins_operands.source.raw and ins_operands.source.name, and these fields overlaps with ins_operands.jump.raw_comment and ins_operands.jump.raw_func_start. Since in loongarch_jump__parse(), these two fields are populated by strchr()-ing the same buffer, trying to free them will lead to undefined behavior. This invalid free usually leads to crashes: Process 1712902 (perf) of user 1000 dumped core. Stack trace of thread 1712902: #0 0x00007fffef155c58 n/a (libc.so.6 + 0x95c58) #1 0x00007fffef0f7a94 raise (libc.so.6 + 0x37a94) #2 0x00007fffef0dd6a8 abort (libc.so.6 + 0x1d6a8) #3 0x00007fffef145490 n/a (libc.so.6 + 0x85490) #4 0x00007fffef1646f4 n/a (libc.so.6 + 0xa46f4) #5 0x00007fffef164718 n/a (libc.so.6 + 0xa4718) #6 0x00005555583a6764 __zfree (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x106764) #7 0x000055555854fb70 disasm_line__free (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x2afb70) #8 0x000055555853d618 annotated_source__purge (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x29d618) #9 0x000055555852300c __hist_entry__tui_annotate (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x28300c) #10 0x0000555558526718 do_annotate (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x286718) #11 0x000055555852ed94 evsel__hists_browse (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x28ed94) #12 0x000055555831fdd0 cmd_report (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x7fdd0) #13 0x000055555839b644 handle_internal_command (/home/csmantle/dist/linux-arch/tools/perf/perf + 0xfb644) #14 0x00005555582fe6ac main (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x5e6ac) #15 0x00007fffef0ddd90 n/a (libc.so.6 + 0x1dd90) #16 0x00007fffef0ddf0c __libc_start_main (libc.so.6 + 0x1df0c) #17 0x00005555582fed10 _start (/home/csmantle/dist/linux-arch/tools/perf/perf + 0x5ed10) ELF object binary architecture: LoongArch ... and it can be confirmed with Valgrind: ==1721834== Invalid free() / delete / delete[] / realloc() ==1721834== at 0x4EA9014: free (in /usr/lib/valgrind/vgpreload_memcheck-loongarch64-linux.so) ==1721834== by 0x4106287: __zfree (zalloc.c:13) ==1721834== by 0x42ADC8F: disasm_line__free (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x429B737: annotated_source__purge (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42811EB: __hist_entry__tui_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42848D7: do_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x428CF33: evsel__hists_browse (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== Address 0x7d34303 is 35 bytes inside a block of size 62 alloc'd ==1721834== at 0x4EA59B8: malloc (in /usr/lib/valgrind/vgpreload_memcheck-loongarch64-linux.so) ==1721834== by 0x6B80B6F: strdup (strdup.c:42) ==1721834== by 0x42AD917: disasm_line__new (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42AE5A3: symbol__disassemble_objdump (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42AF0A7: symbol__disassemble (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x429B3CF: symbol__annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x429C233: symbol__annotate2 (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42804D3: __hist_entry__tui_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x42848D7: do_annotate (in /home/csmantle/dist/linux-arch/tools/perf/perf) ==1721834== by 0x428CF33: evsel__hists_browse (in /home/csmantle/dist/linux-arch/tools/perf/perf) This patch adds the missing free() specialization in loongarch_jump_ops, which prevents disasm_line__free() from invoking the default cleanup function. Fixes: fb7fd2a ("perf annotate: Move raw_comment and raw_func_start fields out of 'struct ins_operands'") Cc: stable@vger.kernel.org Cc: WANG Rui <wangrui@loongson.cn> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: WANG Xuerui <kernel@xen0n.name> Cc: loongarch@lists.linux.dev Signed-off-by: Rong Bao <rong.bao@csmantle.top> Tested-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Namhyung Kim <namhyung@kernel.org>

@sync

Being a module parameter, it's possible to do: # modprobe cifs drop_dir_cache=1 Which will lead to a crash, because cifs_tcp_ses_list hasn't been initialized yet: [ 168.242624] BUG: kernel NULL pointer dereference, address: 0000000000000010 [ 168.242952] #PF: supervisor read access in kernel mode [ 168.243175] #PF: error_code(0x0000) - not-present page [ 168.243394] PGD 0 P4D 0 [ 168.243524] Oops: Oops: 0000 [#1] SMP NOPTI [ 168.243703] CPU: 2 UID: 0 PID: 1105 Comm: modprobe Not tainted 7.0.0-lku #5 PREEMPT(lazy) [ 168.244054] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.17.0-2-g4f253b9b-prebuilt.qemu.org 04/01/2014 [ 168.244557] RIP: 0010:cifs_param_set_drop_dir_cache+0x7c/0x100 [cifs] ... [ 168.248785] Call Trace: [ 168.248915] <TASK> [ 168.249023] parse_args+0x285/0x3a0 [ 168.249204] ? __pfx_unknown_module_param_cb+0x10/0x10 [ 168.249448] load_module+0x192b/0x1bb0 [ 168.249637] ? __pfx_unknown_module_param_cb+0x10/0x10 [ 168.249882] ? kernel_read_file+0x27d/0x2b0 [ 168.250088] init_module_from_file+0xce/0xf0 [ 168.250291] idempotent_init_module+0xfb/0x2f0 [ 168.250496] __x64_sys_finit_module+0x5a/0xa0 [ 168.250694] do_syscall_64+0xe0/0x5a0 [ 168.250863] ? exc_page_fault+0x65/0x160 [ 168.251050] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 168.251284] RIP: 0033:0x7fcaa12b774d Instead of fixing this with some kind of "is module initialized" approach, this patch instead moves that functionality to procfs, setting a write op for the existing open_dirs entry, where writing a 0 to it will drop the cached directory entries. Also make it available only when CONFIG_CIFS_DEBUG=y. A small change needed now is to not call flush_delayed_work() on invalidate_all_cached_dirs() when called from procfs (can't sleep in that context). So add a @sync arg to invalidate_all_cached_dirs() to control when to flush the delayed works. Fixes: dde6667 ("smb: client: add drop_dir_cache module parameter to invalidate cached dirents") Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>

ice_reset_all_vfs() ignores the return value of ice_vf_rebuild_vsi(). When the VSI rebuild fails (e.g. during NVM firmware update via nvmupdate64e), ice_vsi_rebuild() tears down the VSI on its error path, leaving txq_map and rxq_map as NULL. The subsequent unconditional call to ice_vf_post_vsi_rebuild() leads to a NULL pointer dereference in ice_ena_vf_q_mappings() when it accesses vsi->txq_map[0]. The single-VF reset path in ice_reset_vf() already handles this correctly by checking the return value of ice_vf_reconfig_vsi() and skipping ice_vf_post_vsi_rebuild() on failure. Apply the same pattern to ice_reset_all_vfs(): check the return value of ice_vf_rebuild_vsi() and skip ice_vf_post_vsi_rebuild() and ice_eswitch_attach_vf() on failure. The VF is left safely disabled (ICE_VF_STATE_INIT not set, VFGEN_RSTAT not set to VFACTIVE) and can be recovered via a VFLR triggered by a PCI reset of the VF (sysfs reset or driver rebind). Note that this patch does not prevent the VF VSI rebuild from failing during NVM update — the underlying cause is firmware being in a transitional state while the EMP reset is processed, which can cause Admin Queue commands (ice_add_vsi, ice_cfg_vsi_lan) to fail. This patch only prevents the subsequent NULL pointer dereference that crashes the kernel when the rebuild does fail. crash> bt PID: 50795 TASK: ff34c9ee708dc680 CPU: 1 COMMAND: "kworker/u512:5" #0 [ff72159bcfe5bb50] machine_kexec at ffffffffaa8850ee #1 [ff72159bcfe5bba8] __crash_kexec at ffffffffaaa15fba #2 [ff72159bcfe5bc68] crash_kexec at ffffffffaaa16540 #3 [ff72159bcfe5bc70] oops_end at ffffffffaa837eda #4 [ff72159bcfe5bc90] page_fault_oops at ffffffffaa893997 #5 [ff72159bcfe5bce8] exc_page_fault at ffffffffab528595 #6 [ff72159bcfe5bd10] asm_exc_page_fault at ffffffffab600bb2 [exception RIP: ice_ena_vf_q_mappings+0x79] RIP: ffffffffc0a85b29 RSP: ff72159bcfe5bdc8 RFLAGS: 00010206 RAX: 00000000000f0000 RBX: ff34c9efc9c00000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000010 RDI: ff34c9efc9c00000 RBP: ff34c9efc27d4828 R8: 0000000000000093 R9: 0000000000000040 R10: ff34c9efc27d4828 R11: 0000000000000040 R12: 0000000000100000 R13: 0000000000000010 R14: R15: ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #7 [ff72159bcfe5bdf8] ice_sriov_post_vsi_rebuild at ffffffffc0a85e2e [ice] #8 [ff72159bcfe5be08] ice_reset_all_vfs at ffffffffc0a920b4 [ice] #9 [ff72159bcfe5be48] ice_service_task at ffffffffc0a31519 [ice] #10 [ff72159bcfe5be88] process_one_work at ffffffffaa93dca4 #11 [ff72159bcfe5bec8] worker_thread at ffffffffaa93e9de #12 [ff72159bcfe5bf18] kthread at ffffffffaa946663 #13 [ff72159bcfe5bf50] ret_from_fork at ffffffffaa8086b9 The panic occurs attempting to dereference the NULL pointer in RDX at ice_sriov.c:294, which loads vsi->txq_map (offset 0x4b8 in ice_vsi). The faulting VSI is an allocated slab object but not fully initialized after a failed ice_vsi_rebuild(): crash> struct ice_vsi 0xff34c9efc27d4828 netdev = 0x0, rx_rings = 0x0, tx_rings = 0x0, q_vectors = 0x0, txq_map = 0x0, rxq_map = 0x0, alloc_txq = 0x10, num_txq = 0x10, alloc_rxq = 0x10, num_rxq = 0x10, The nvmupdate64e process was performing NVM firmware update: crash> bt 0xff34c9edd1a30000 PID: 49858 TASK: ff34c9edd1a30000 CPU: 1 COMMAND: "nvmupdate64e" #0 [ff72159bcd617618] __schedule at ffffffffab5333f8 #4 [ff72159bcd617750] ice_sq_send_cmd at ffffffffc0a35347 [ice] #5 [ff72159bcd6177a8] ice_sq_send_cmd_retry at ffffffffc0a35b47 [ice] #6 [ff72159bcd617810] ice_aq_send_cmd at ffffffffc0a38018 [ice] #7 [ff72159bcd617848] ice_aq_read_nvm at ffffffffc0a40254 [ice] #8 [ff72159bcd6178b8] ice_read_flat_nvm at ffffffffc0a4034c [ice] #9 [ff72159bcd617918] ice_devlink_nvm_snapshot at ffffffffc0a6ffa5 [ice] dmesg: ice 0000:13:00.0: firmware recommends not updating fw.mgmt, as it may result in a downgrade. continuing anyways ice 0000:13:00.1: ice_init_nvm failed -5 ice 0000:13:00.1: Rebuild failed, unload and reload driver Fixes: 12bb018 ("ice: Refactor VF reset") Signed-off-by: Petr Oros <poros@redhat.com> Tested-by: Rafal Romanowski <rafal.romanowski@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20260427-jk-iwl-net-petr-oros-fixes-v1-5-cdcb48303fd8@intel.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

When concurrently bringing up and down two SMT threads of a physical core, many warning call traces occur as below: The issue timeline is as follows: 1. When the system starts, cpufreq: CPU: 220, policy->related_cpus: 220-221, policy->cpus: 220-221 2. Offline CPU 220 and CPU 221. 3. Online CPU 220 - CPU 221 is now offline, as acpi_get_psd_map() use for_each_online_cpu(), so the cpu_data->shared_cpu_map, policy->cpus, and related_cpus has only CPU 220. cpufreq: CPU: 220, policy->related_cpus: 220, policy->cpus: 220 4. Offline CPU 220 5. Online CPU 221, the below call trace occurs: - Since CPU 220 and CPU 221 share one policy, and policy->related_cpus = 220 after step 3, so CPU 221 is not in policy->related_cpus but per_cpu(cpufreq_cpu_data, cpu221) is not NULL. After reverting commit 56eb0c0 ("ACPI: CPPC: Fix remaining for_each_possible_cpu() to use online CPUs"), the issue disappeared. The _PSD (P-State Dependency) defines the hardware-level dependency of frequency control across CPU cores. Since this relationship is a physical attribute of the hardware topology, it remains constant regardless of the online or offline status of the CPUs. Using for_each_online_cpu() in acpi_get_psd_map() is problematic. If a CPU is offline, it will be excluded from the shared_cpu_map. Consequently, if that CPU is brought online later, the kernel will fail to recognize it as part of any shared frequency domain. Switch back to for_each_possible_cpu() to ensure that all cores defined in the ACPI tables are correctly mapped into their respective performance domains from the start. This aligns with the logic of policy->related_cpus, which must encompass all potentially available cores in the domain to prevent logic gaps during CPU hotplug operations. To resolve the original issue regarding the "nosmt" or "nosmt=force" boot parameter, as send_pcc_cmd() function already does if (!desc) continue, so reverting that loop back to for_each_possible_cpu() is ok, only need to change the match_cpc_ptr NULL case in acpi_get_psd_map() to continue as Sean suggested. How to reproduce, on arm64 machine with SMT support which use acpi cppc cpufreq driver: bash test.sh 220 & bash test.sh 221 & The test.sh is as below: while true do echo 0 > /sys/devices/system/cpu/cpu${1}/online sleep 0.5 cat /sys/devices/system/cpu/cpu${1}/cpufreq/related_cpus echo 1 > /sys/devices/system/cpu/cpu${1}/online cat /sys/devices/system/cpu/cpu${1}/cpufreq/related_cpus done CPU: 221 PID: 1119 Comm: cpuhp/221 Kdump: loaded Not tainted 6.6.0debug+ #5 Hardware name: To be filled by O.E.M. S920X20/BC83AMDA01-7270Z, BIOS 20.39 09/04/2024 pstate: a1400009 (NzCv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : cpufreq_online+0x8ac/0xa90 lr : cpuhp_cpufreq_online+0x18/0x30 sp : ffff80008739bce0 x29: ffff80008739bce0 x28: 0000000000000000 x27: ffff28400ca32200 x26: 0000000000000000 x25: 0000000000000003 x24: ffffd483503ff000 x23: ffffd483504051a0 x22: ffffd48350024a00 x21: 00000000000000dd x20: 000000000000001d x19: ffff28400ca32000 x18: 0000000000000000 x17: 0000000000000020 x16: ffffd4834e6a3fc8 x15: 0000000000000020 x14: 0000000000000008 x13: 0000000000000001 x12: 00000000ffffffff x11: 0000000000000040 x10: ffffd48350430728 x9 : ffffd4834f087c78 x8 : 0000000000000001 x7 : ffff2840092bdf00 x6 : ffffd483504264f0 x5 : ffffd48350405000 x4 : ffff283f7f95cc60 x3 : 0000000000000000 x2 : ffff53bc2f94b000 x1 : 00000000000000dd x0 : 0000000000000000 Call trace: cpufreq_online+0x8ac/0xa90 cpuhp_cpufreq_online+0x18/0x30 cpuhp_invoke_callback+0x128/0x580 cpuhp_thread_fun+0x110/0x1b0 smpboot_thread_fn+0x140/0x190 kthread+0xec/0x100 ret_from_fork+0x10/0x20 ---[ end trace 0000000000000000 ]--- Cc: All applicable <stable@vger.kernel.org> Fixes: 56eb0c0 ("ACPI: CPPC: Fix remaining for_each_possible_cpu() to use online CPUs") Co-developed-by: Sean Kelley <skelley@nvidia.com> Signed-off-by: Sean Kelley <skelley@nvidia.com> Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> [ rjw: Changelog edits ] Link: https://patch.msgid.link/20260417040112.3727756-1-ruanjinjie@huawei.com Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

JBL Pebbles is a pair of desktop speakers with UAC interface. Its Playback and Capture mixers use linear volume with val = 0/999/1 and 0/3996/4. Meanwhile, the reported sample rates are truncated to multiples of 0x100 (i.e., 44100 => 44032), resulting in noisy kmsg, as a warning message is printed each time a stream is opened. Add a quirk table entry matching VID/PID=0x05fc/0x0231 and applying linear volume and sample rate quirk flags, so that it can work properly. Also note that the volume control knob on device is an incremental encoder. It does nothing but sends KEY_VOLUMEUP and KEY_VOLUMEDOWN per rotation, controlling the UAC Playback volume mixer indirectly. Hence, the linear volume quirk flags also enable the volume control knob to function properly. Quirky device sample: usb 5-1.1: new full-speed USB device number 12 using xhci_hcd usb 5-1.1: New USB device found, idVendor=05fc, idProduct=0231, bcdDevice= 1.00 usb 5-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 5-1.1: Product: JBL Pebbles usb 5-1.1: Manufacturer: Harman International Industries usb 5-1.1: SerialNumber: 1.0.0 usb-storage 5-1.1:1.0: USB Mass Storage device detected scsi host0: usb-storage 5-1.1:1.0 usb 5-1.1: Found last interface = 1 usb 5-1.1: 2:1: add audio endpoint 0x5 usb 5-1.1: Creating new data endpoint #5 usb 5-1.1: 2:1 Set sample rate 44100, clock 0 usb 5-1.1: current rate 44032 is different from the runtime rate 44100 usb 5-1.1: 3:1: add audio endpoint 0x84 usb 5-1.1: Creating new data endpoint #84 usb 5-1.1: 3:1 Set sample rate 44100, clock 0 usb 5-1.1: current rate 44032 is different from the runtime rate 44100 usb 5-1.1: [2] FU [PCM Playback Switch] ch = 1, val = 0/1/1 usb 5-1.1: Warning! Unlikely big volume step count (=999), linear volume or wrong cval->res? usb 5-1.1: [2] FU [PCM Playback Volume] ch = 2, val = 0/999/1 usb 5-1.1: [5] FU [Mic Capture Switch] ch = 1, val = 0/1/1 usb 5-1.1: Warning! Unlikely big volume step count (=999), linear volume or wrong cval->res? usb 5-1.1: [5] FU [Mic Capture Volume] ch = 2, val = 0/3996/4 input: Harman International Industries JBL Pebbles as /devices/pci0000:00/0000:00:08.3/0000:67:00.3/usb5/5-1/5-1.1/5-1.1:1.4/0003:05FC:0231.0018/input/input55 hid-generic 0003:05FC:0231.0018: input,hidraw2: USB HID v2.01 Device [Harman International Industries JBL Pebbles] on usb-0000:67:00.3-1.1/input4 Signed-off-by: Rong Zhang <i@rong.moe> Link: https://patch.msgid.link/20260504-uac-jbl-pebbles-v1-1-c888d592a286@rong.moe Signed-off-by: Takashi Iwai <tiwai@suse.de>

syzbot reports for sleeping function called from invalid context [1]. The recently added code for resizable hash tables uses hlist_bl bit locks in combination with spin_lock for the connection fields (cp->lock). Fix the following problems: * avoid using spin_lock(&cp->lock) under locked bit lock because it sleeps on PREEMPT_RT * as the recent changes call ip_vs_conn_hash() only for newly allocated connection, the spin_lock can be removed there because the connection is still not linked to table and does not need cp->lock protection. * the lock can be removed also from ip_vs_conn_unlink() where we are the last connection user. * the last place that is fixed is ip_vs_conn_fill_cport() where now the cp->lock is locked before the other locks to ensure other packets do not modify the cp->flags in non-atomic way. Here we make sure cport and flags are changed only once if two or more packets race to fill the cport. Also, we fill cport early, so that if we race with resizing there will be valid cport key for the hashing. Add a warning if too many hash table changes occur for our RCU read-side critical section which is error condition but minor because the connection still can expire gracefully. Still, restore the cport to 0 to allow retransmitted packet to properly fill the cport. Problems reported by Sashiko. [1]: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 16, name: ktimers/0 preempt_count: 2, expected: 0 RCU nest depth: 3, expected: 3 8 locks held by ktimers/0/16: #0: ffffffff8de5f260 (local_bh){.+.+}-{1:3}, at: __local_bh_disable_ip+0x3c/0x420 kernel/softirq.c:163 #1: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: __local_bh_disable_ip+0x3c/0x420 kernel/softirq.c:163 #2: ffff8880b8826360 (&base->expiry_lock){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:45 [inline] #2: ffff8880b8826360 (&base->expiry_lock){+...}-{3:3}, at: timer_base_lock_expiry kernel/time/timer.c:1502 [inline] #2: ffff8880b8826360 (&base->expiry_lock){+...}-{3:3}, at: __run_timer_base+0x120/0x9f0 kernel/time/timer.c:2384 #3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:300 [inline] #3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: __rt_spin_lock kernel/locking/spinlock_rt.c:50 [inline] #3: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rt_spin_lock+0x1e0/0x400 kernel/locking/spinlock_rt.c:57 #4: ffffc90000157a80 ((&cp->timer)){+...}-{0:0}, at: call_timer_fn+0xd4/0x5e0 kernel/time/timer.c:1745 #5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:300 [inline] #5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: ip_vs_conn_unlink net/netfilter/ipvs/ip_vs_conn.c:315 [inline] #5: ffffffff8dfc80c0 (rcu_read_lock){....}-{1:3}, at: ip_vs_conn_expire+0x257/0x2390 net/netfilter/ipvs/ip_vs_conn.c:1260 #6: ffffffff8de5f260 (local_bh){.+.+}-{1:3}, at: __local_bh_disable_ip+0x3c/0x420 kernel/softirq.c:163 #7: ffff888068d4c3f0 (&cp->lock#2){+...}-{3:3}, at: spin_lock include/linux/spinlock_rt.h:45 [inline] #7: ffff888068d4c3f0 (&cp->lock#2){+...}-{3:3}, at: ip_vs_conn_unlink net/netfilter/ipvs/ip_vs_conn.c:324 [inline] #7: ffff888068d4c3f0 (&cp->lock#2){+...}-{3:3}, at: ip_vs_conn_expire+0xd4a/0x2390 net/netfilter/ipvs/ip_vs_conn.c:1260 Preemption disabled at: [<ffffffff898a6358>] bit_spin_lock include/linux/bit_spinlock.h:38 [inline] [<ffffffff898a6358>] hlist_bl_lock+0x18/0x110 include/linux/list_bl.h:149 CPU: 0 UID: 0 PID: 16 Comm: ktimers/0 Tainted: G W L syzkaller #0 PREEMPT_{RT,(full)} Tainted: [W]=WARN, [L]=SOFTLOCKUP Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/18/2026 Call Trace: <TASK> dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120 __might_resched+0x329/0x480 kernel/sched/core.c:9162 __rt_spin_lock kernel/locking/spinlock_rt.c:48 [inline] rt_spin_lock+0xc2/0x400 kernel/locking/spinlock_rt.c:57 spin_lock include/linux/spinlock_rt.h:45 [inline] ip_vs_conn_unlink net/netfilter/ipvs/ip_vs_conn.c:324 [inline] ip_vs_conn_expire+0xd4a/0x2390 net/netfilter/ipvs/ip_vs_conn.c:1260 call_timer_fn+0x192/0x5e0 kernel/time/timer.c:1748 expire_timers kernel/time/timer.c:1799 [inline] __run_timers kernel/time/timer.c:2374 [inline] __run_timer_base+0x6a3/0x9f0 kernel/time/timer.c:2386 run_timer_base kernel/time/timer.c:2395 [inline] run_timer_softirq+0xb7/0x170 kernel/time/timer.c:2405 handle_softirqs+0x1de/0x6d0 kernel/softirq.c:622 __do_softirq kernel/softirq.c:656 [inline] run_ktimerd+0x69/0x100 kernel/softirq.c:1151 smpboot_thread_fn+0x541/0xa50 kernel/smpboot.c:160 kthread+0x388/0x470 kernel/kthread.c:436 ret_from_fork+0x514/0xb70 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Reported-by: syzbot+504e778ddaecd36fdd17@syzkaller.appspotmail.com Link: https://sashiko.dev/#/patchset/20260415200216.79699-1-ja%40ssi.bg Link: https://sashiko.dev/#/patchset/20260420165539.85174-4-ja%40ssi.bg Link: https://sashiko.dev/#/patchset/20260422135823.50489-4-ja%40ssi.bg Fixes: 2fa7cc9 ("ipvs: switch to per-net connection table") Signed-off-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

sctp_stream_update() is only invoked when the association is moved into COOKIE_WAIT during association setup/reconfiguration. In this path, the outbound stream scheduler state (stream->out_curr) is expected to be clean, since no user data should have been transmitted yet unless the state machine has already partially progressed. However, a corner case exists in sctp_sf_do_5_2_6_stale(): when a Stale Cookie ERROR is received, the association is rolled back from COOKIE_ECHOED to COOKIE_WAIT. In this scenario, user data may already have been queued and even bundled with the COOKIE-ECHO chunk. During the rollback, sctp_stream_update() frees the old stream table and installs a new one, but it does not invalidate stream->out_curr. As a result, out_curr may still point to a freed sctp_stream_out entry from the previous stream state. Later, SCTP scheduler dequeue paths (FCFS, RR, PRIO, etc.) rely on stream->out_curr->ext, which can lead to use-after-free once the old stream state has been released via sctp_stream_free(). This results in crashes such as (reported by Yuqi): BUG: KASAN: slab-use-after-free in sctp_sched_fcfs_dequeue+0x13a/0x140 Read of size 8 at addr ff1100004d4d3208 by task mini_poc/9312 CPU: 1 UID: 1001 PID: 9312 Comm: mini_poc Not tainted 7.1.0-rc1-00305-gbd3a4795d574 #5 PREEMPT(full) sctp_sched_fcfs_dequeue+0x13a/0x140 sctp_outq_flush+0x1603/0x33e0 sctp_do_sm+0x31c9/0x5d30 sctp_assoc_bh_rcv+0x392/0x6f0 sctp_inq_push+0x1db/0x270 sctp_rcv+0x138d/0x3c10 Fix this by fully purging the association outqueue when handling the Stale Cookie case. This ensures all pending transmit and retransmit state is dropped, and any scheduler cached pointers are invalidated, making it safe to rebuild stream state during COOKIE_WAIT restart. Updating only stream->out_curr would be insufficient, since queued and retransmittable data would still reference the old stream state and trigger later use-after-free in dequeue paths. Fixes: 5bbbbe3 ("sctp: introduce stream scheduler foundations") Reported-by: Yuan Tan <yuantan098@gmail.com> Reported-by: Yifan Wu <yifanwucs@gmail.com> Reported-by: Juefei Pu <tomapufckgml@gmail.com> Reported-by: Zhengchuan Liang <zcliangcn@gmail.com> Reported-by: Xin Liu <bird@lzu.edu.cn> Reported-by: Yuqi Xu <xuyq21@lenovo.com> Reported-by: Ren Wei <n05ec@lzu.edu.cn> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://patch.msgid.link/94318159b9052907a6cbb7256aee8b5f8dfbfccb.1780510304.git.lucien.xin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 7.1, take #5 - Correctly drop the ITS translation cache reference when it actually gets invalidated - Take the SRCU lock for SW page table walks - Restore POR_EL0 access to host EL0, avoiding POR_EL0 becoming inaccessible from EL0 after running a guest - Reassign nested_mmus array behind mmu_lock, ensuring that vcpu init and MMU notifiers are mutually exclusive - Correctly handle FEAT_XNX at stage-2

When accidentally setting “kvm-arm.vgic_v4_enable=1” on a system that has no MSI controller device tree node and GICv4, it results a panic as “gic_domain” is NULL and the kernel attempts to access it. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000028 Mem abort info: ESR = 0x0000000096000006 CPU: 1 UID: 0 PID: 295 Comm: lkvm-static Not tainted 7.1.0-rc4-ge3f15ad3970e #5 PREEMPT Hardware name: linux,dummy-virt (DT) pstate: 81402005 (Nzcv daif +PAN -UAO -TCO +DIT -SSBS BTYPE=--) pc : __irq_domain_instantiate+0x1d4/0x578 lr : __irq_domain_instantiate+0x1cc/0x578 Set vLPI support to false at init time if the host has no ITS, so it propagates properly to kvm_vgic_global_state.has_gicv4. Suggested-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Mostafa Saleh <smostafa@google.com> Signed-off-by: Thomas Gleixner <tglx@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://patch.msgid.link/20260526125317.3672297-1-smostafa@google.com

…unlock race When the FUTEX_ROBUST_UNLOCK mechanism is used for unlocking (PI-)futexes, then the unlock sequence in user space looks like this: 1) robust_list_set_op_pending(mutex); 2) robust_list_remove(mutex); lval = gettid(); 3) if (atomic_try_cmpxchg(&mutex->lock, lval, 0)) 4) robust_list_clear_op_pending(); else 5) sys_futex(OP | FUTEX_ROBUST_UNLOCK, ....); That still leaves a minimal race window between #3 and #4 where the mutex could be acquired by some other task, which observes that it is the last user and: 1) unmaps the mutex memory 2) maps a different file, which ends up covering the same address When then the original task exits before reaching #5 then the kernel robust list handling observes the pending op entry and tries to fix up user space. In case that the newly mapped data contains the TID of the exiting thread at the address of the mutex/futex the kernel will set the owner died bit in that memory and therefore corrupt unrelated data. On X86 this boils down to this simplified assembly sequence: mov %esi,%eax // Load TID into EAX xor %ecx,%ecx // Set ECX to 0 #3 lock cmpxchg %ecx,(%rdi) // Try the TID -> 0 transition .Lstart: jnz .Lend #4 movq %rcx,(%rdx) // Clear list_op_pending .Lend: If the cmpxchg() succeeds and the task is interrupted before it can clear list_op_pending in the robust list head (#4) and the task crashes in a signal handler or gets killed then it ends up in do_exit() and subsequently in the robust list handling, which then might run into the unmap/map issue described above. This is only relevant when user space was interrupted and a signal is pending. The fix-up has to be done before signal delivery is attempted because: 1) The signal might be fatal so get_signal() ends up in do_exit() 2) The signal handler might crash or the task is killed before returning from the handler. At that point the instruction pointer in pt_regs is not longer the instruction pointer of the initially interrupted unlock sequence. The right place to handle this is in __exit_to_user_mode_loop() before invoking arch_do_signal_or_restart() as this covers obviously both scenarios. As this is only relevant when the task was interrupted in user space, this is tied to RSEQ and the generic entry code as RSEQ keeps track of user space interrupts unconditionally even if the task does not have a RSEQ region installed. That makes the decision very lightweight: if (current->rseq.user_irq && within(regs, csr->unlock_ip_range)) futex_fixup_robust_unlock(regs, csr); futex_fixup_robust_unlock() then invokes a architecture specific function to return the pending op pointer or NULL. The function evaluates the register content to decide whether the pending ops pointer in the robust list head needs to be cleared. Assuming the above unlock sequence, then on x86 this decision is the trivial evaluation of the zero flag: return regs->eflags & X86_EFLAGS_ZF ? regs->dx : NULL; Other architectures might need to do more complex evaluations due to LLSC, but the approach is valid in general. The size of the pointer is determined from the matching range struct, which covers both 32-bit and 64-bit builds including COMPAT. The unlock sequence is going to be placed in the VDSO so that the kernel can keep everything synchronized, especially the register usage. The resulting code sequence for user space is: if (__vdso_futex_robust_list$SZ_try_unlock(lock, tid, &pending_op) != tid) err = sys_futex($OP | FUTEX_ROBUST_UNLOCK,....); Both the VDSO unlock and the kernel side unlock ensure that the pending_op pointer is always cleared when the lock becomes unlocked. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: André Almeida <andrealmeid@igalia.com> Link: https://patch.msgid.link/20260602090535.773669210@kernel.org

When the FUTEX_ROBUST_UNLOCK mechanism is used for unlocking (PI-)futexes, then the unlock sequence in userspace looks like this: 1) robust_list_set_op_pending(mutex); 2) robust_list_remove(mutex); lval = gettid(); 3) if (atomic_try_cmpxchg(&mutex->lock, lval, 0)) 4) robust_list_clear_op_pending(); else 5) sys_futex(OP,...FUTEX_ROBUST_UNLOCK); That still leaves a minimal race window between #3 and #4 where the mutex could be acquired by some other task which observes that it is the last user and: 1) unmaps the mutex memory 2) maps a different file, which ends up covering the same address When then the original task exits before reaching #5 then the kernel robust list handling observes the pending op entry and tries to fix up user space. In case that the newly mapped data contains the TID of the exiting thread at the address of the mutex/futex the kernel will set the owner died bit in that memory and therefore corrupt unrelated data. Provide a VDSO function which exposes the critical section window in the VDSO symbol table. The resulting addresses are updated in the task's mm when the VDSO is (re)map()'ed. The core code detects when a task was interrupted within the critical section and is about to deliver a signal. It then invokes an architecture specific function which determines whether the pending op pointer has to be cleared or not. The unlock assembly sequence on 64-bit is: mov %esi,%eax // Load TID into EAX xor %ecx,%ecx // Set ECX to 0 lock cmpxchg %ecx,(%rdi) // Try the TID -> 0 transition .Lstart: jnz .Lend movq %rcx,(%rdx) // Clear list_op_pending .Lend: ret So the decision can be simply based on the ZF state in regs->flags. The pending op pointer is always in DX independent of the build mode (32/64-bit) to make the pending op pointer retrieval uniform. The size of the pointer is stored in the matching criticial section range struct and the core code retrieves it from there. So the pointer retrieval function does not have to care. It is bit-size independent: return regs->flags & X86_EFLAGS_ZF ? regs->dx : NULL; There are two entry points to handle the different robust list pending op pointer size: __vdso_futex_robust_list64_try_unlock() __vdso_futex_robust_list32_try_unlock() The 32-bit VDSO provides only __vdso_futex_robust_list32_try_unlock(). The 64-bit VDSO provides always __vdso_futex_robust_list64_try_unlock() and when COMPAT is enabled also the list32 variant, which is required to support multi-size robust list pointers used by gaming emulators. The unlock function is inspired by an idea from Mathieu Desnoyers. Signed-off-by: Thomas Gleixner <tglx@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Reviewed-by: André Almeida <andrealmeid@igalia.com> Acked-by: Uros Bizjak <ubizjak@gmail.com> Link: https://lore.kernel.org/20260311185409.1988269-1-mathieu.desnoyers@efficios.com Link: https://patch.msgid.link/20260602090535.883796247@kernel.org

…announcements' Danielle Ratson says: ==================== bridge: Add selective forwarding of gratuitous neighbor announcements The existing neighbor suppression unconditionally suppresses gratuitous ARPs and unsolicited Neighbor Advertisements, which prevents fast mobility of hosts between VTEPs. This series adds a new neigh_forward_grat option that provides independent control of gratuitous ARP and unsolicited NA forwarding. When neigh_suppress is enabled but neigh_forward_grat is enabled, regular neighbor discovery is suppressed while gratuitous announcements are forwarded. The implementation marks gratuitous ARPs and unsolicited NAs in BR_INPUT_SKB_CB during input processing, then checks the per-output-port neigh_forward_grat setting during flooding. This allows gratuitous announcements from any input port to be selectively forwarded based on each output port's individual configuration. Both port-level control (via IFLA_BRPORT_NEIGH_FORWARD_GRAT) and per-VLAN control (via BRIDGE_VLANDB_ENTRY_NEIGH_FORWARD_GRAT) are provided. The default value of OFF preserves existing behavior. This behavior is in accordance with RFC 9161 (Section 3.6), which recommends that VTEPs forward gratuitous ARP and unsolicited NA messages to avoid traffic disruption during host mobility events. The new attributes use NLA_U8, although the kernel netlink guideline recommends NLA_U32 as the minimum integer type on the grounds that alignment makes smaller types equivalent on the wire. For a simple on/off attribute there is no technical advantage to u32 over u8, and keeping u8 preserves consistency with all surrounding bridge port attributes and avoids introducing new helpers alongside the existing infrastructure. Patchset overview: Patch #1: adds uapi headers. Patches #2-#3: support selective forwarding of gratuitous ARP. Patches #4-#5: add netlink handling. Patch #6: adds tests. Please see iproute related patches in the last 3 commits of: https://github.com/daniellerts/iproute2 ==================== Link: https://patch.msgid.link/20260511065936.4173106-1-danieller@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

strset_add_str_mem() might reallocate the strset data buffer in order to accommodate the provided string 's'. However, if 's' points to a string already present in the buffer, it becomes dangling after the realloc. This leads to a use-after-free when attempting to memcpy() the string into the new buffer. One scenario that triggers this problematic path is when resolve_btfids attempts to patch kfunc prototypes using existing BTF parameter names: | resolve_btfids: function bpf_list_push_back_impl already exists in BTF | Segmentation fault (core dumped) Compiling resolve_btfids with fsanitize=address generates a detailed report of the UAF: | ================================================================= | ERROR: AddressSanitizer: heap-use-after-free on address 0x7f4c4a500bd4 | ==1507892==ERROR: AddressSanitizer: heap-use-after-free on address 0x7f4c4a500bd4 at pc 0x55d25155a2a8 bp 0x7ffcef879060 sp 0x7ffcef878818 | READ of size 5 at 0x7f4c4a500bd4 thread T0 | #0 0x55d25155a2a7 in memcpy (tools/bpf/resolve_btfids/resolve_btfids+0xcf2a7) | #1 0x55d2515d708e in strset__add_str tools/lib/bpf/strset.c:162:2 | #2 0x55d2515c730b in btf__add_str tools/lib/bpf/btf.c:2109:8 | #3 0x55d2515c9020 in btf__add_func_param tools/lib/bpf/btf.c:3108:14 | #4 0x55d25159f0b5 in process_kfunc_with_implicit_args tools/bpf/resolve_btfids/main.c:1196:9 | #5 0x55d25159e004 in btf2btf tools/bpf/resolve_btfids/main.c:1229:9 | #6 0x55d25159cee7 in main tools/bpf/resolve_btfids/main.c:1535:6 | #7 0x7f4c78e29f76 in __libc_start_call_main csu/../sysdeps/nptl/libc_start_call_main.h:58:16 | #8 0x7f4c78e2a026 in __libc_start_main csu/../csu/libc-start.c:360:3 | #9 0x55d2514bb860 in _start (tools/bpf/resolve_btfids/resolve_btfids+0x30860) | | 0x7f4c4a500bd4 is located 13268 bytes inside of 2829000-byte region [0x7f4c4a4fd800,0x7f4c4a7b02c8) | freed by thread T0 here: | #0 0x55d25155b700 in realloc (tools/bpf/resolve_btfids/resolve_btfids+0xd0700) | #1 0x55d2515c426c in libbpf_reallocarray tools/lib/bpf/./libbpf_internal.h:220:9 | #2 0x55d2515c426c in libbpf_add_mem tools/lib/bpf/btf.c:224:13 | | previously allocated by thread T0 here: | #0 0x55d25155b2e3 in malloc (tools/bpf/resolve_btfids/resolve_btfids+0xd02e3) | #1 0x55d2515d6e7d in strset__new tools/lib/bpf/strset.c:58:20 While resolve_btfids could be refactored to avoid this call path, let's instead fix this issue at the source in strset__add_str() and avoid similar scenarios. Let's check if set->strs_data was reallocated and whether 's' points to an internal string within the old strset buffer. In such case, 's' is reconstructed to point to the new buffer. While already here, also fix strset__find_str() which suffers from the same problem by factoring out the common operations into a new helper function strset_str_append(). Fixes: 90d76d3 ("libbpf: Extract internal set-of-strings datastructure APIs") Suggested-by: Andrii Nakryiko <andrii@kernel.org> Suggested-by: Mykyta Yatsenko <yatsenko@meta.com> Signed-off-by: Carlos Llamas <cmllamas@google.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20260523162722.2718940-1-cmllamas@google.com

A deadlock occurs in the audit subsystem when duplicating executable-related rules. When a file is moved (e.g., via do_renameat2()), the VFS layer locks the parent directory (I_MUTEX_PARENT), which synchronously triggers an fsnotify_move event. If an existing executable audit rule matches the file being moved, the audit subsystem catches this event and calls audit_dupe_exe() to duplicate the watch and update the rule. Then, audit_alloc_mark() would call kern_path_parent() to resolve the path, leading to a blind attempt to acquire the exact same I_MUTEX_PARENT lock already held by the task, resulting in the following recursive locking deadlock: ============================================ WARNING: possible recursive locking detected 6.12.0-55.27.1.el10_0.x86_64+debug #1 Not tainted -------------------------------------------- mv/5099 is trying to acquire lock: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3}, at: __kern_path_locked+0x10a/0x2f0 but task is already holding lock: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3}, at: lock_two_directories+0x13f/0x2b0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&inode->i_sb->s_type->i_mutex_dir_key/1); lock(&inode->i_sb->s_type->i_mutex_dir_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by mv/5099: #0: ffff888112a9c440 (sb_writers#13) at: do_renameat2+0x34c/0xbc0 #1: ffff888112a9c790 (&type->s_vfs_rename_key#3) at: do_renameat2+0x415/0xbc0 #2: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1) at: lock_two_directories+0x13f/0x2b0 #3: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/5) at: lock_two_directories+0x175/0x2b0 #4: ffffffffb3a1fb10 (&fsnotify_mark_srcu) at: fsnotify+0x454/0x28a0 #5: ffffffffaf886230 (audit_filter_mutex) at: audit_update_watch+0x36/0x11e0 stack backtrace: Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_deadlock_bug.cold+0xbd/0xca validate_chain+0x83a/0xf00 __lock_acquire+0xcac/0x1d20 lock_acquire.part.0+0x11b/0x360 down_write_nested+0x9f/0x230 __kern_path_locked+0x10a/0x2f0 kern_path_locked+0x26/0x40 audit_alloc_mark+0xfb/0x4f0 audit_dupe_exe+0x6c/0xe0 audit_dupe_rule+0x6c2/0xc00 audit_update_watch+0x4cc/0x11e0 audit_watch_handle_event+0x12c/0x1b0 send_to_group+0x5d0/0x8b0 fsnotify+0x615/0x28a0 fsnotify_move+0x1d8/0x630 vfs_rename+0xdcd/0x1df0 do_renameat2+0x9d4/0xbc0 __x64_sys_renameat+0x192/0x260 do_syscall_64+0x92/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0491fe8c4e Code: 0f 1f 40 00 48 8b 15 c1 e1 16 00 f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 08 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 89 RSP: 002b:00007ffc7210bf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0491fe8c4e RDX: 0000000000000003 RSI: 00007ffc7210e6c8 RDI: 00000000ffffff9c RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: 00005575eb2dae2a R11: 0000000000000246 R12: 00005575eb2dae2a R13: 00007ffc7210e6c8 R14: 0000000000000003 R15: 00000000ffffff9c </TASK> The aforementioned deadlock can be consistently reproduced by running the script below: audit-dupe-exe-deadlock.sh -------------------------- #!/bin/bash auditctl -D mkdir -p /tmp/foo touch /tmp/file auditctl -a always,exit -F exe=/tmp/file -F path=/tmp/file -S all -k dr mv /tmp/file /tmp/foo/file rm -Rf /tmp/foo This patch fixes the issue by introducing struct audit_watch_ctx to pass the fsnotify event context down to audit_alloc_mark(). By utilizing the already-resolved directory inode provided by the event, we bypass the kern_path_parent() path resolution entirely, safely avoiding the recursive lock. Furthermore, it explicitly allows duplicate fsnotify marks (allow_dups = 1) during the rename update, allowing the new rule's mark to safely coexist with the old rule's mark until the old rule is freed. P.S.: This issue was identified and reproduced during a comprehensive code coverage analysis of the audit subsystem. The full report is available at the link below: https://people.redhat.com/rrobaina/audit-code-coverage-analysis.pdf P.P.S: With the permission of both Ricardo and Nathan, I've squashed a fixup patch from Nathan that addresses a compile time error when CONFIG_AUDITSYSCALL=n. Cc: stable@kernel.org Fixes: 34d99af ("audit: implement audit by executable") Acked-by: Waiman Long <longman@redhat.com> Acked-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Ricardo Robaina <rrobaina@redhat.com> [PM: move link metadata into the msg, apply fix from NC] Signed-off-by: Paul Moore <paul@paul-moore.com>

If revalidating the zones of a zoned block device with blk_revalidate_disk_zones() fails during a SCSI disk rescan, the following lockdep splat is thrown: [ 347.251859] [ T11230] sda: failed to revalidate zones [ 347.261380] [ T11230] ====================================================== [ 347.263882] [ T11230] WARNING: possible circular locking dependency detected [ 347.266353] [ T11230] 7.1.0+ #1194 Not tainted [ 347.268052] [ T11230] ------------------------------------------------------ [ 347.270537] [ T11230] tcsh/11230 is trying to acquire lock: [ 347.272555] [ T11230] ffffffff8f91d400 (wq_pool_mutex){+.+.}-{4:4}, at: destroy_workqueue+0x15d/0x8d0 [ 347.275914] [ T11230] but task is already holding lock: [ 347.278646] [ T11230] ffff88812fa1bcc0 (&q->q_usage_counter(io)#5){++++}-{0:0}, at: blk_mq_freeze_queue_nomemsave+0x16/0x30 [ 347.282503] [ T11230] which lock already depends on the new lock. [ 347.286239] [ T11230] the existing dependency chain (in reverse order) is: [ 347.289408] [ T11230] -> #2 (&q->q_usage_counter(io)#5){++++}-{0:0}: [ 347.292437] [ T11230] blk_alloc_queue+0x5ca/0x750 [ 347.294379] [ T11230] blk_mq_alloc_queue+0x14c/0x240 [ 347.296375] [ T11230] scsi_alloc_sdev+0x871/0xd10 [scsi_mod] [ 347.298619] [ T11230] scsi_probe_and_add_lun+0x600/0xc50 [scsi_mod] [ 347.301056] [ T11230] __scsi_scan_target+0x187/0x3b0 [scsi_mod] [ 347.303385] [ T11230] scsi_scan_channel+0xf2/0x180 [scsi_mod] [ 347.305651] [ T11230] scsi_scan_host_selected+0x20b/0x2d0 [scsi_mod] [ 347.308119] [ T11230] do_scan_async+0x42/0x420 [scsi_mod] [ 347.310276] [ T11230] async_run_entry_fn+0x94/0x5a0 [ 347.312284] [ T11230] process_one_work+0x8da/0x1690 [ 347.314287] [ T11230] worker_thread+0x5fe/0x1010 [ 347.316216] [ T11230] kthread+0x358/0x450 [ 347.317675] [ T11230] ret_from_fork+0x5b9/0x8e0 [ 347.319181] [ T11230] ret_from_fork_asm+0x11/0x20 [ 347.320778] [ T11230] -> #1 (fs_reclaim){+.+.}-{0:0}: [ 347.322890] [ T11230] fs_reclaim_acquire+0xd5/0x120 [ 347.324464] [ T11230] __kmalloc_cache_node_noprof+0x39/0x620 [ 347.326223] [ T11230] init_rescuer+0x19b/0x560 [ 347.327697] [ T11230] workqueue_init+0x33b/0x6a0 [ 347.329224] [ T11230] kernel_init_freeable+0x2eb/0x600 [ 347.330881] [ T11230] kernel_init+0x1c/0x140 [ 347.332334] [ T11230] ret_from_fork+0x5b9/0x8e0 [ 347.333847] [ T11230] ret_from_fork_asm+0x11/0x20 [ 347.335360] [ T11230] -> #0 (wq_pool_mutex){+.+.}-{4:4}: [ 347.337510] [ T11230] __lock_acquire+0xdea/0x2260 [ 347.339030] [ T11230] lock_acquire+0x187/0x2f0 [ 347.340495] [ T11230] __mutex_lock+0x1ab/0x2600 [ 347.341464] [ T11230] destroy_workqueue+0x15d/0x8d0 [ 347.342485] [ T11230] disk_free_zone_resources+0xd5/0x560 [ 347.343577] [ T11230] blk_revalidate_disk_zones+0x620/0xac7 [ 347.344723] [ T11230] sd_zbc_revalidate_zones+0x1dd/0x790 [sd_mod] [ 347.345938] [ T11230] sd_revalidate_disk+0xc66/0x8e60 [sd_mod] [ 347.347112] [ T11230] scsi_rescan_device+0x1f9/0x310 [scsi_mod] [ 347.348318] [ T11230] store_rescan_field+0x19/0x20 [scsi_mod] [ 347.349507] [ T11230] kernfs_fop_write_iter+0x3d2/0x5e0 [ 347.350565] [ T11230] vfs_write+0x469/0x1000 [ 347.351484] [ T11230] ksys_write+0x116/0x250 [ 347.352403] [ T11230] do_syscall_64+0xf0/0x6e0 [ 347.353361] [ T11230] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [ 347.354533] [ T11230] other info that might help us debug this: [ 347.356432] [ T11230] Chain exists of: wq_pool_mutex --> fs_reclaim --> &q->q_usage_counter(io)#5 [ 347.358919] [ T11230] Possible unsafe locking scenario: [ 347.360307] [ T11230] CPU0 CPU1 [ 347.361327] [ T11230] ---- ---- [ 347.362340] [ T11230] lock(&q->q_usage_counter(io)#5); [ 347.363344] [ T11230] lock(fs_reclaim); [ 347.364526] [ T11230] lock(&q->q_usage_counter(io)#5); [ 347.365968] [ T11230] lock(wq_pool_mutex); [ 347.366811] [ T11230] *** DEADLOCK *** This happens because SCSI disk rescan is executed from a work context and a failure of blk_revalidate_disk_zones() causes a call to disk_free_zone_resources() which will free the disk zone write plug workqueue. Avoid this by delaying the destruction of the disk zone write plug workqueue to disk_release(). Do this by introducing the function disk_release_zone_resources() and using this new function from disk_release(). This new function destroys the zone write plugs workqueue and calls disk_free_zone_resources(), thus allowing to remove the call to destroy_workqueue() from disk_free_zone_resources(). disk_alloc_zone_resources() is modified to not create the disk zone write plug work queue if it already exists. Fixes: a8f59e5 ("block: use a per disk workqueue for zone write plugging") Cc: stable@vger.kernek.org Signed-off-by: Damien Le Moal <dlemoal@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@kernel.org> Link: https://patch.msgid.link/20260701082155.1369996-1-dlemoal@kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk>

Cancel (and flush) the I/O APIC's delayed EOI handling work during the "pre VM destroy" phase, before vCPUs are destroyed, as processing the EOI broadcast will inject another IRQ if the line is asserted, i.e. will try to deliver an IRQ to the target vCPU(s). Canceling the work after vCPUs are destroyed leads to UAF if the delayed work is processed after vCPUs are destroyed. BUG: KASAN: slab-use-after-free in __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250 Read of size 8 at addr ffff8880499abea0 by task kworker/1:2/1218 CPU: 1 UID: 0 PID: 1218 Comm: kworker/1:2 Not tainted 7.1.0-rc7 #5 PREEMPT(lazy) Hardware name: QEMU Ubuntu 25.10 PC v2 (i440FX + PIIX, + 10.1 machine, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 Workqueue: events kvm_ioapic_eoi_inject_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 dump_stack_lvl+0x100/0x190 lib/dump_stack.c:120 print_address_description mm/kasan/report.c:378 print_report+0x139/0x4ad mm/kasan/report.c:482 kasan_report+0xe4/0x1d0 mm/kasan/report.c:595 __kvm_irq_delivery_to_apic_fast+0x9bf/0xa20 arch/x86/kvm/lapic.c:1250 __kvm_irq_delivery_to_apic+0xd8/0xbf0 arch/x86/kvm/lapic.c:1345 kvm_irq_delivery_to_apic arch/x86/kvm/lapic.h:129 ioapic_service+0x308/0x590 arch/x86/kvm/ioapic.c:492 kvm_ioapic_eoi_inject_work+0x13c/0x190 arch/x86/kvm/ioapic.c:532 process_one_work+0xa59/0x19a0 kernel/workqueue.c:3314 process_scheduled_works kernel/workqueue.c:3397 worker_thread+0x5eb/0xe50 kernel/workqueue.c:3478 kthread+0x370/0x450 kernel/kthread.c:436 ret_from_fork+0x72b/0xd30 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> Note, the VM is unreachable once kvm_destroy_vm() starts, and scheduling new work via kvm_ioapic_send_eoi() can only be done via KVM_RUN, i.e. requires a live vCPU. Alternatively, KVM could simply destroy the I/O APIC during the "pre" phase of VM destruction, but that gets more than a bit sketchy as KVM expects the I/O APIC to exist if ioapic_in_kernel() is true, and nested virtualization in particular has a bad habit of touching VM-scope state during vCPU destruction. E.g. attempting to free the PIC during the pre phase would lead to a NULL pointer dereference in kvm_cpu_has_extint(), and it's not hard to imagine the I/O APIC having a similar flaw. Fixes: 17bcd71 ("KVM: x86: Free vCPUs before freeing VM state") Reported-by: <zdi-disclosures@trendmicro.com> Reported-by: Zhong Wang <wangzhong.c0ss4ck@bytedance.com> Reported-by: Xuanqing Shi <shixuanqing.11@bytedance.com> Cc: stable@vger.kernel.org Signed-off-by: Weiming Shi <bestswngs@gmail.com> Co-developed-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20260727171718.543491-1-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Mimoja closed this Oct 18, 2023

Navigation Menu

Uh oh!

crash: Disable SNP on crashkernel kexec - #5

crash: Disable SNP on crashkernel kexec#5
Mimoja wants to merge 1 commit into
AMDESE:snp-host-v9-rfcfrom
Mimoja:snp-host-v9-rfc

Mimoja commented Aug 3, 2023

Uh oh!

ashkalra commented Aug 4, 2023

Uh oh!

Mimoja commented Aug 4, 2023 •

edited

Loading

Uh oh!

ashkalra commented Aug 4, 2023 •

edited

Loading

Uh oh!

Mimoja commented Aug 4, 2023

Uh oh!

ashkalra commented Aug 7, 2023

Uh oh!

ashkalra commented Aug 9, 2023

Uh oh!

ashkalra commented Aug 14, 2023

Uh oh!

ashkalra commented Aug 15, 2023

Uh oh!

ashkalra commented Aug 16, 2023

Uh oh!

Mimoja commented Oct 18, 2023

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Uh oh!

Conversation

Mimoja commented Aug 3, 2023

Context

Issue

Fix

Note:

Commit message:

Uh oh!

ashkalra commented Aug 4, 2023

Uh oh!

Mimoja commented Aug 4, 2023 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

ashkalra commented Aug 4, 2023 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

Mimoja commented Aug 4, 2023

Uh oh!

ashkalra commented Aug 7, 2023

Uh oh!

ashkalra commented Aug 9, 2023

Uh oh!

ashkalra commented Aug 14, 2023

Uh oh!

ashkalra commented Aug 15, 2023

Uh oh!

ashkalra commented Aug 16, 2023

Uh oh!

Mimoja commented Oct 18, 2023

Uh oh!

Reviewers

Assignees

Labels

Projects

Milestone

Development

Uh oh!

2 participants

Mimoja commented Aug 4, 2023 •

edited

Loading

ashkalra commented Aug 4, 2023 •

edited

Loading